Author |
Message |
Mike Hillbery Samba Member
Joined: September 04, 2003 Posts: 2
|
Posted: Fri Sep 23, 2022 4:32 pm Post subject: Re: 1933 Carrington Kit cars ? LN-33 |
|
|
Hi, Does anyone have an assembly manual for a Carrington LN-33 kit car? any help appreciated, Thanks Mike _________________ Thanks,Mike |
|
Back to top |
|
|
DesignBuild Samba Member
Joined: September 29, 2016 Posts: 314 Location: TEXAS
|
Posted: Sun Sep 25, 2022 1:25 pm Post subject: |
|
|
Very cool... BTW, I think the first VW kit cars were the LaDawri Quest Q.T., Thor and Alken. [/quote]
Never heard of those. What body style did they replicate ?
There were literally hundreds of body styles made in the 60's, 70's and 80's. Most never caught on, but today, when you see a nice one at a car show, there's usually a crowd around it, asking what it is.
And the funny thing,
there's usually a high dollar Corvette or Mustang sitting nearby and the owner of that car is really pissed off because nobody asks about his car.
[/quote]
It is interesting that you ask what these vehicles replicated. They didn't replicate anything that came before. They may have been influenced but very few looked like a replica of anything. Go to Undiscovered Classics for more examples. A number of bodies could have been made to fit the full size VW chassis. The ALKEN was made to fit the full size chassis and it was very unique looking. The ALKEN was produced in 1958 and not many were made. Unlike many early kit cars the ALKEN was truly a complete body with internal bulkheads and complete weathertight wheel wells. It was factory assembled from all of the individual moldings to make a complete and rigid body. With a bit of ingenuity it could have been made to mount the VW drive train and not use the VW chassis at all. You can see a brochure at Undiscovered Classics. Many of the other fiberglass bodies that were produced that were designed for a 95.5 inch wheelbase could have been used as a VW replacement body. The earliest fiberglass "kit car" was made in 1952. See the Porsche patent for a unitized synthetic body for a Porsche sports car.
|
|
Back to top |
|
|
DesignBuild Samba Member
Joined: September 29, 2016 Posts: 314 Location: TEXAS
|
Posted: Sun Sep 25, 2022 1:47 pm Post subject: |
|
|
Ravinsomniac wrote: |
Smyrnaguy,
Florida Laws are a lot more relaxed down here than many other States. Headlight requirements are, "no lower than 12" on center, and no closer than 24" on center."
My projection headlights are the same as standard production cars, but they are recessed, which is legal, I checked first. The lower driving lamps just squeaked by at the minimum height requirements. Florida does not have a yearly Vehicle State Inspection, like other States do. Your car is inspected by a Mechanic when you buy it and that's it. However, a cop will pull you over, if you are riding on bald tires, or if you have a light out, but that's about it. A few years back, they started that"Click it or Ticket" Law, so seat belts are required.
Twenty five years ago, I built a home made, street legal, VW rail buggy. It had no body and looked just like a big go-cart. I made it out of regular steel water pipe with a 1/8" thick steel plate floor. A windshield was not required, but you had to wear glasses. Headlights and taillights were required, but turn signals were not. You could use hand signals for turning. My horn was an antique style, rubber squeeze ball type, which was legal. I'm sure if I drove it 10 feet across the Florida border, I would have been busted for something. |
Actually, the headlight height regulation is a NHTSA requirement for manufactures. In addition there are other NHTSA stipulations on height of tail lights as well as marker lights so oncoming traffic will recognize your vehicle as an automobile. So, your vehicle body was never intended for the street. If it was it would have had the headlight pods at least 22 inches above the road surface. You would have much better visibility if the headlights were at least 22 inches above the road surface. You could probably use the same lights but they would need to be higher than they are now. In addition, do not ever drive the car on Federal land or you could be stopped and have the car confiscated. |
|
Back to top |
|
|
tac422 Samba Member
Joined: September 22, 2010 Posts: 18 Location: Virginia
|
Posted: Mon Sep 26, 2022 5:55 am Post subject: Re: 1933 Carrington Kit cars ? LN-33 |
|
|
Mike Hillbery wrote: |
Hi, Does anyone have an assembly manual for a Carrington LN-33 kit car? any help appreciated, Thanks Mike |
Ken Neithken of Neithken Associates (540) 337-1777 may have something. He was the last producer of the kits.
If you have specific questions, I might be able to help as I've owned one. |
|
Back to top |
|
|
McLela Samba Member
Joined: February 05, 2005 Posts: 48 Location: Fernandina Beach, Florida
|
Posted: Sat Jun 17, 2023 4:38 pm Post subject: Re: 1933 Carrington Kit cars ? LN-33 |
|
|
Hi, I'm looking for a assembly manual for the Carrington LN-33 kit car? The cars were built by David & Nancy Gray in Florida in the early 1980's. Any help appreciated, Thanks
|
|
Back to top |
|
|
|