| Author |
Message |
allamaabroad
Samba Member
Joined: September 22, 2016
Posts: 560
Location: South Jordan, Utah
|
 Posted: Mon Oct 03, 2022 11:54 am Post subject: CB Black Box Mag Pickup Wiring |
 |
|
Looking for a quick fix on this, I can't find the documentation from my BlackBox and need the wiring diagram for when using a magnetic pickup. I believe it's different from when using a module somehow? I switched to an msd distributor and the blackbox is no longer getting an RPM signal.
Thanks!
_________________
Dennis - 1973 Super Beetle ('16-'21)
Debbie- 1970 Baywindow Bus ('21 - Present)
Tin top camper/adventure bus
2180 TW: CNC Panchitos, Beehives Done Right, Web 163, Ultralight Lifters, 1.3 Rockers, CSP Python, Custom Speeduino EFI Conversion with 40mm Throttle Bodies
Distributors are lame
I have a really hard time leaving things alone...
Innovative and affordable engine management systems and EFI conversions for your Vintage VW
Visit https://debbiesaircooled.com/ |
|
| Back to top |
|
 |
Dale M.
Samba Member
Joined: April 12, 2006
Posts: 20379
Location: Just a tiny bit west of Yosemite Valley
|
| Posted: Mon Oct 03, 2022 12:34 pm Post subject: Re: CB Black Box Mag Pickup Wiring |
|
|
Probably find information here, Just check for correct "Button"
https://www.dropbox.com/s/6icpr0gynrutsg2/Black%20...ms%2Ffiles
Might try Button #6...
_________________
“Fear The Government That Wants To Take Your Guns" - Thomas Jefferson.
"Kellison Sand Piper Roadster" For Street & Show.
"Joe Pody Sandrover" Buggy with 2180 for Autocross (Sold)
============================================================
All suggestions and advice are purely my own opinion. You are free to ignore them if you wish ... |
|
| Back to top |
|
|
allamaabroad
Samba Member
Joined: September 22, 2016
Posts: 560
Location: South Jordan, Utah
|
| Posted: Mon Oct 03, 2022 12:38 pm Post subject: Re: CB Black Box Mag Pickup Wiring |
|
|
Yup that'll do it, wiring definitely is incorrect.
Thanks so much!
_________________
Dennis - 1973 Super Beetle ('16-'21)
Debbie- 1970 Baywindow Bus ('21 - Present)
Tin top camper/adventure bus
2180 TW: CNC Panchitos, Beehives Done Right, Web 163, Ultralight Lifters, 1.3 Rockers, CSP Python, Custom Speeduino EFI Conversion with 40mm Throttle Bodies
Distributors are lame
I have a really hard time leaving things alone...
Innovative and affordable engine management systems and EFI conversions for your Vintage VW
Visit https://debbiesaircooled.com/ |
|
| Back to top |
|
|
|
