Author |
Message |
Not Safari Izzy Samba Member
Joined: February 16, 2004 Posts: 837 Location: Santa Clara, CA
|
Posted: Wed Nov 30, 2022 10:40 am Post subject: Repro windshield molding installation |
|
|
Hi All,
Does anyone have experience installing the reproduction split windshield molding and clips?
I’m having difficulty installing. I’m wondering if anyone had any tips or tricks to install. I have various clips that don’t clip into the molding. I’ve messed with it for days and still have issues.
Any help would be greatly appreciated. Thanks!
_________________ DBK Nor Cal
1952 Beetle 11G
1956 Beetle 151 |
|
Back to top |
|
|
virtanen Samba Member
Joined: January 08, 2006 Posts: 1461 Location: Finland
|
|
Back to top |
|
|
Not Safari Izzy Samba Member
Joined: February 16, 2004 Posts: 837 Location: Santa Clara, CA
|
Posted: Wed Nov 30, 2022 1:22 pm Post subject: Re: Repro windshield molding installation |
|
|
virtanen wrote: |
I have made this years ago, I had the original rubber seal and molding + repro clips. It was important to check the orientation of the clips are correct way.
|
Thanks Mika! I’ve tried to orient them as best as possible. Seems the areas that have somewhat of a curve are the troublesome ones.
Also, thanks for all your parts!! They have been critical to my build. _________________ DBK Nor Cal
1952 Beetle 11G
1956 Beetle 151 |
|
Back to top |
|
|
Zwitterkafer Samba Member
Joined: November 17, 2007 Posts: 879 Location: Lanark County, Ontario, Canada
|
Posted: Thu Dec 01, 2022 10:10 am Post subject: Re: Repro windshield molding installation |
|
|
Could it be that, like the later system, the molding has to be installed in the rubber on the glass before installing the glass in the car? Maybe the '51 - '52 workshop manual has the answer. _________________ "Criticism comes easier than Craftsmanship"
- Zeuxius, 400 BC |
|
Back to top |
|
|
tcoop1100 Samba Member
Joined: August 12, 2004 Posts: 197 Location: Hilo, Moku O Keawe, Moana Pakipika
|
Posted: Thu Dec 01, 2022 12:21 pm Post subject: Re: Repro windshield molding installation |
|
|
Zwitterkafer wrote: |
Could it be that, like the later system, the molding has to be installed in the rubber on the glass before installing the glass in the car? Maybe the '51 - '52 workshop manual has the answer. |
That was my thought- the trim needs to be installed in the seal before the window goes in the car. Is it different for splits? _________________ Aloha,
Tim
January '57 Sedan, April '64 40hp big bore |
|
Back to top |
|
|
|