Author |
Message |
fastmc25 Samba Member
Joined: January 01, 2004 Posts: 1202 Location: East Tennessee
|
Posted: Wed Jan 25, 2023 5:39 am Post subject: Re: Kubel 2021 |
|
|
Thanks. It’s Battlefield Green. The Paint is a Matte finish paint from Eastwood.com. I also sealed the body with thier urethane epoxy primer.
https://www.eastwood.com/eastwood-battlefield-olive-drab-3-1-single-stage-paint.html _________________ Peace,
Paul
1973 Type181 Kubelwagen (Thing 2 ) 2110cc
1971 Transporter (Pickle) 1914cc
1961 Deluxe Beetle (Christine) 1776cc
1973 Adventurewagen Baja Bus (Clyde) 3.4L
1970 Formula Vee Beetle 2276cc
I identify as: “A Pissed Old GI ” |
|
Back to top |
|
|
vwtragic62 Samba Member
Joined: January 22, 2023 Posts: 14 Location: Australia
|
Posted: Thu Jan 26, 2023 1:11 am Post subject: Re: Kubel 2021 |
|
|
Thanks Paul.
cheers
Noel. |
|
Back to top |
|
|
fastmc25 Samba Member
Joined: January 01, 2004 Posts: 1202 Location: East Tennessee
|
Posted: Fri Oct 27, 2023 4:50 pm Post subject: Re: Kubel 2021 |
|
|
Trying out one of these Diesel heaters Still need to finish wiring and the fuel tank install.
_________________ Peace,
Paul
1973 Type181 Kubelwagen (Thing 2 ) 2110cc
1971 Transporter (Pickle) 1914cc
1961 Deluxe Beetle (Christine) 1776cc
1973 Adventurewagen Baja Bus (Clyde) 3.4L
1970 Formula Vee Beetle 2276cc
I identify as: “A Pissed Old GI ” |
|
Back to top |
|
|
fastmc25 Samba Member
Joined: January 01, 2004 Posts: 1202 Location: East Tennessee
|
Posted: Tue Oct 31, 2023 7:13 am Post subject: Re: Kubel 2021 |
|
|
_________________ Peace,
Paul
1973 Type181 Kubelwagen (Thing 2 ) 2110cc
1971 Transporter (Pickle) 1914cc
1961 Deluxe Beetle (Christine) 1776cc
1973 Adventurewagen Baja Bus (Clyde) 3.4L
1970 Formula Vee Beetle 2276cc
I identify as: “A Pissed Old GI ” |
|
Back to top |
|
|
Johnnyw Samba Member
Joined: May 12, 2017 Posts: 62 Location: San Clemente, CA
|
Posted: Tue Oct 31, 2023 11:12 am Post subject: Re: Kubel 2021 |
|
|
Excellent build. Thank you for posting.
I’m curious about your seats. What make and model are they??
Did they attach to your existing rails?
Also, are your fuel lines custom made??
Thanks, John _________________ 1974 Thing with a 1776
San Clemente, CA |
|
Back to top |
|
|
fastmc25 Samba Member
Joined: January 01, 2004 Posts: 1202 Location: East Tennessee
|
Posted: Tue Oct 31, 2023 12:48 pm Post subject: Re: Kubel 2021 |
|
|
Thanks. The seats are from Rugged Ridge. Purchased on Amazon. Seat mounts and sliders are from Speedway.com.
Fuel lines i made. 😎 _________________ Peace,
Paul
1973 Type181 Kubelwagen (Thing 2 ) 2110cc
1971 Transporter (Pickle) 1914cc
1961 Deluxe Beetle (Christine) 1776cc
1973 Adventurewagen Baja Bus (Clyde) 3.4L
1970 Formula Vee Beetle 2276cc
I identify as: “A Pissed Old GI ” |
|
Back to top |
|
|
Johnnyw Samba Member
Joined: May 12, 2017 Posts: 62 Location: San Clemente, CA
|
Posted: Tue Oct 31, 2023 6:36 pm Post subject: Re: Kubel 2021 |
|
|
Paul,
Thanks for the information.
John. _________________ 1974 Thing with a 1776
San Clemente, CA |
|
Back to top |
|
|
fastmc25 Samba Member
Joined: January 01, 2004 Posts: 1202 Location: East Tennessee
|
Posted: Thu Nov 02, 2023 1:48 pm Post subject: Re: Kubel 2021 |
|
|
Working great! Took a bit to get the pump primed but puts out very nice heat.
I will need to install a downpipe on the muffler though. 😎. The kit comes with a 10L tank which i hated. Too odd shaped to work for me so i changed to a 7L tank that fits much better.
I will be painting the heater cover black. 😳
_________________ Peace,
Paul
1973 Type181 Kubelwagen (Thing 2 ) 2110cc
1971 Transporter (Pickle) 1914cc
1961 Deluxe Beetle (Christine) 1776cc
1973 Adventurewagen Baja Bus (Clyde) 3.4L
1970 Formula Vee Beetle 2276cc
I identify as: “A Pissed Old GI ” |
|
Back to top |
|
|
ncpi Samba Member
Joined: May 10, 2020 Posts: 208 Location: TN & FL
|
Posted: Fri Nov 17, 2023 8:41 am Post subject: Re: Kubel 2021 |
|
|
fastmc25 wrote: |
Trying out one of these Diesel heaters Still need to finish wiring and the fuel tank install.
|
Really nice work! I am reinstalling an original heater in my Thing. A lot of the holes in the Frunk were fiberglassed and hidden. I have found all the heater related ones, but how is that forward facing evap line from the canister running through the Frunk? I can't figure out how (where) it passed through to get under the chassis?
Thanks,
Bill |
|
Back to top |
|
|
fastmc25 Samba Member
Joined: January 01, 2004 Posts: 1202 Location: East Tennessee
|
Posted: Fri Nov 17, 2023 2:04 pm Post subject: Re: Kubel 2021 |
|
|
There’s a hole beside the fuel tank underneath the heat shield for the heater exhaust. _________________ Peace,
Paul
1973 Type181 Kubelwagen (Thing 2 ) 2110cc
1971 Transporter (Pickle) 1914cc
1961 Deluxe Beetle (Christine) 1776cc
1973 Adventurewagen Baja Bus (Clyde) 3.4L
1970 Formula Vee Beetle 2276cc
I identify as: “A Pissed Old GI ” |
|
Back to top |
|
|
ncpi Samba Member
Joined: May 10, 2020 Posts: 208 Location: TN & FL
|
Posted: Fri Nov 17, 2023 2:21 pm Post subject: Re: Kubel 2021 |
|
|
fastmc25 wrote: |
There’s a hole beside the fuel tank underneath the heat shield for the heater exhaust. |
I was looking for where the evap line ran. Don't think I would want to route it through the hole for the heater exhaust, that might get a bit warm
I did find that i could route it through the hole for the heater fuel line and fuel pump wires. That seems to work out pretty well. |
|
Back to top |
|
|
fastmc25 Samba Member
Joined: January 01, 2004 Posts: 1202 Location: East Tennessee
|
Posted: Fri Nov 17, 2023 2:24 pm Post subject: Re: Kubel 2021 |
|
|
ncpi wrote: |
fastmc25 wrote: |
There’s a hole beside the fuel tank underneath the heat shield for the heater exhaust. |
I was looking for where the evap line ran. Don't think I would want to route it through the hole for the heater exhaust, that might get a bit warm
I did find that i could route it through the hole for the heater fuel line and fuel pump wires. That seems to work out pretty well. |
That’s where I meant _________________ Peace,
Paul
1973 Type181 Kubelwagen (Thing 2 ) 2110cc
1971 Transporter (Pickle) 1914cc
1961 Deluxe Beetle (Christine) 1776cc
1973 Adventurewagen Baja Bus (Clyde) 3.4L
1970 Formula Vee Beetle 2276cc
I identify as: “A Pissed Old GI ” |
|
Back to top |
|
|
fastmc25 Samba Member
Joined: January 01, 2004 Posts: 1202 Location: East Tennessee
|
Posted: Fri Nov 17, 2023 2:27 pm Post subject: Re: Kubel 2021 |
|
|
I wrapped my exhaust with the header wrap. Helps reduce some of the heat in the Frunk _________________ Peace,
Paul
1973 Type181 Kubelwagen (Thing 2 ) 2110cc
1971 Transporter (Pickle) 1914cc
1961 Deluxe Beetle (Christine) 1776cc
1973 Adventurewagen Baja Bus (Clyde) 3.4L
1970 Formula Vee Beetle 2276cc
I identify as: “A Pissed Old GI ” |
|
Back to top |
|
|
ncpi Samba Member
Joined: May 10, 2020 Posts: 208 Location: TN & FL
|
Posted: Fri Nov 17, 2023 3:26 pm Post subject: Re: Kubel 2021 |
|
|
Thanks Paul. The wrap is a good idea! |
|
Back to top |
|
|
doublecanister Samba Member
Joined: September 23, 2008 Posts: 1184 Location: Richmond, Va
|
Posted: Sat Nov 18, 2023 7:29 am Post subject: Re: Kubel 2021 |
|
|
very nice install there Paul.
Maybe a good suggestion for the Things with missing heaters.
Shame they don't make a gasoline one to use the Thing fuel source but you made it work! _________________ ****************************************
2020 - Mustang Eco Boost [High Performance]
1973 - Thing
1966 - Mustang GT- Fastback
1951 - Ford F1 pickup Flathead V8 |
|
Back to top |
|
|
KAmes Samba Member
Joined: February 16, 2014 Posts: 877 Location: Illinois
|
Posted: Sat Nov 18, 2023 2:26 pm Post subject: Re: Kubel 2021 |
|
|
doublecanister wrote: |
Shame they don't make a gasoline one to use the Thing fuel source but you made it work! |
This one's gasoline but trust me you don't want to pay what it cost, I probably should have bought a diesel one also.
|
|
Back to top |
|
|
fastmc25 Samba Member
Joined: January 01, 2004 Posts: 1202 Location: East Tennessee
|
Posted: Wed Nov 29, 2023 6:02 am Post subject: Re: Kubel 2021 |
|
|
KAmes wrote: |
doublecanister wrote: |
Shame they don't make a gasoline one to use the Thing fuel source but you made it work! |
This one's gasoline but trust me you don't want to pay what it cost, I probably should have bought a diesel one also.
|
Yeah. The webasto is nice but very pricey. I’m still going to go through my eberspacher heater and seeif it’s serviceable. _________________ Peace,
Paul
1973 Type181 Kubelwagen (Thing 2 ) 2110cc
1971 Transporter (Pickle) 1914cc
1961 Deluxe Beetle (Christine) 1776cc
1973 Adventurewagen Baja Bus (Clyde) 3.4L
1970 Formula Vee Beetle 2276cc
I identify as: “A Pissed Old GI ” |
|
Back to top |
|
|
fastmc25 Samba Member
Joined: January 01, 2004 Posts: 1202 Location: East Tennessee
|
Posted: Thu Apr 04, 2024 12:29 pm Post subject: Re: Kubel 2021 |
|
|
Trying out a Tri-Mil sidewinder on Thing 2. Hangs lower than i like but is still not lower than the bottom of my engine sump. Sounds good and does run quieter and smoother than with the Tri-Mil bologna tube exhaust. Will know more when i get some drive time and tuning done. 😎
I may shorten the chrome tip.
_________________ Peace,
Paul
1973 Type181 Kubelwagen (Thing 2 ) 2110cc
1971 Transporter (Pickle) 1914cc
1961 Deluxe Beetle (Christine) 1776cc
1973 Adventurewagen Baja Bus (Clyde) 3.4L
1970 Formula Vee Beetle 2276cc
I identify as: “A Pissed Old GI ” |
|
Back to top |
|
|
Heiferman Samba Member
Joined: February 28, 2024 Posts: 7 Location: Georgia, USA
|
Posted: Thu Apr 04, 2024 4:55 pm Post subject: Re: Kubel 2021 |
|
|
I have been quietly following along. I am very impressed. |
|
Back to top |
|
|
fastmc25 Samba Member
Joined: January 01, 2004 Posts: 1202 Location: East Tennessee
|
Posted: Thu Apr 04, 2024 5:05 pm Post subject: Re: Kubel 2021 |
|
|
Thanks. It’s a evolutionary project 😂😂 _________________ Peace,
Paul
1973 Type181 Kubelwagen (Thing 2 ) 2110cc
1971 Transporter (Pickle) 1914cc
1961 Deluxe Beetle (Christine) 1776cc
1973 Adventurewagen Baja Bus (Clyde) 3.4L
1970 Formula Vee Beetle 2276cc
I identify as: “A Pissed Old GI ” |
|
Back to top |
|
|
|