Syncro front lower control arm differences

[ALIKA T3]

251407153E and G must both be a lower control arm, it's the same part number with a different letter which translates either in a variant and/or a supercession.
These free catalogs are full of mistakes. It cannot be letter G and a different part, that's not following the logic implemented by VW.

Try find for example the control module part number for a cruise control for a Syncro, you'll come back with a part number for a 2WD on any site you can find, even VW classic Parts, which is wrong.

Don't believe anything, always be critical, these things are like the Bible 😆😆
_________________
Silicone Steering Boots and 930 Cv boots for sale in the classifieds.
Syncro transmission upgrade parts in the Classifieds.
Subaru EJ22+UN1 5 speed transmission
http://www.thesamba.com/vw/forum/viewtopic.php?t=416343
Syncro http://www.thesamba.com/vw/forum/viewtopic.php?t=4...num+gadget

[dobryan]

This topic is going to help a bunch as I put together the front suspension on the '87 Syncro. Thanks.

Can anyone direct me to the torque for the Lower Control Arm to the frame?

I cannot find that value in Bentley. This is the only diagram that shows the LCA but no bolt or torque. (page 40.19 is no help.)

_________________
Dave O
'87 Westy w/ 2002 Subaru EJ25 and Peloquin TBD

"To travel hopefully is a better thing than to arrive." Robert Louis Stevenson

MD>Canada>AK>WA>OR>CA>AZ>UT>WY>SD
https://www.thesamba.com/vw/forum/viewtopic.php?t=620646

Building a bus for travel in Europe (euroBus)
https://www.thesamba.com/vw/forum/viewtopic.php?t=695371

The Western Syncro build
https://www.thesamba.com/vw/forum/viewtopic.php?t=746794

[syncroserge]

Look at page 40.26..not obvious but 66 ft lb..

[dobryan]