Author |
Message |
slayer61 Samba Member
Joined: June 01, 2021 Posts: 1018 Location: CA
|
Posted: Thu Feb 02, 2023 8:42 am Post subject: Re: Slayer's glass buggy 2109 |
|
|
Thanks for the input guys. Much appreciated. FWIW I think I'm gonna stick with the 1.00 or 1.04 4th gear for now. I won't be doing much freeway driving in the buggy. I's supposed to be a "fun" car and not a long distance freeway commuter. If I find it's just intolerable I can go to taller tires like the 275/60s mentioned earlier.
Clonebug & Mike, I have a turbo in the works, and this motor was built with the internals to take it with an adjustment in compression. I have asked my trans builder to keep this in mind when building the trans.
Be safe fellas. _________________
Cusser wrote: |
... Most folks are idiots when it deals with electrical !!! |
67rustavenger wrote: |
3/4 race cam? What's missing, one of the lobes? |
Paul
'68 Manx clone... Sears??
2276 built on AS21 case
W-125 w/ GB 1.25:1 rockers
Mahle forged pistons
CB 4340 crank
CB H beam rods
deep sump
44 HPMX
EMPI GTV 2 STG II wedge ports
CB Magna spark
1 5/8 merged collector w/ hater stinger |
|
Back to top |
|
|
slayer61 Samba Member
Joined: June 01, 2021 Posts: 1018 Location: CA
|
Posted: Thu Oct 19, 2023 2:14 pm Post subject: Re: Slayer's glass buggy 2109 |
|
|
madmike wrote: |
Slayer,,In a while from now, You will be Bored with just the power from dual Carbs: N/a.... so keep the stock ratio gearing for the New 'Turbo' Power ? Nice tub Buggy & a Stinger too |
Mike, you have proven to be very insightful, indeed. As much as I love my N/A buggy... I have never had enough of ANYTHING.... Food? yes please. Beer or other adult beverage, again... yes please Don't we have enough guns in the safe yet??? No darling... no we don't!
Are you seeing where this is going? The ability to add horsepower just by turning a screw is VERY appealing right now.
The current motor was built with forged internals, H-beam rods etc. etc.
I'm just now starting the research phase of adding a turbo to the 2276. "About 8:1 compression and as much boost as I deem necessary to make me grin! I expect to contact RAD designs for one of his "starter" kits and go from there
https://www.radesignsperformance.com/product-page/2rad-draw-through-turbo-system
Stay tuned! _________________
Cusser wrote: |
... Most folks are idiots when it deals with electrical !!! |
67rustavenger wrote: |
3/4 race cam? What's missing, one of the lobes? |
Paul
'68 Manx clone... Sears??
2276 built on AS21 case
W-125 w/ GB 1.25:1 rockers
Mahle forged pistons
CB 4340 crank
CB H beam rods
deep sump
44 HPMX
EMPI GTV 2 STG II wedge ports
CB Magna spark
1 5/8 merged collector w/ hater stinger |
|
Back to top |
|
|
madmike Samba Member
Joined: July 11, 2005 Posts: 5292 Location: Atlanta,Michigan
|
Posted: Mon Oct 23, 2023 7:20 am Post subject: Re: Slayer's glass buggy 2109 |
|
|
we are two pea's in aPod, my friend, at 69 years young I traded an old sandrail for a Crotch Rocket Buell xb9r, did a buck thirty on it that's why I've been MIA ,glad i checked in and seen ur post, RAD stuff
is good I hear cheers,mike _________________ 'Black Ice'Drag Buggy 'Turbo'
Rail Buggy 1915 turbo
76 Drag/Street bug 2180cc 'Turbo' 11:85 @113 mph"If I go any faster I'll burn up the Hamster" ,gets 28 mpg. also 10/09/22 11.90 @115 mph
"If I'm ever on Life Support,UNPLUG Me, Then Plug me back In see if that Works" |
|
Back to top |
|
|
slayer61 Samba Member
Joined: June 01, 2021 Posts: 1018 Location: CA
|
Posted: Tue Jan 02, 2024 9:12 am Post subject: Re: Slayer's glass buggy 2109 |
|
|
So on Friday last week, I went down to see Rodney at RAD designs. He seems like a knowledgeable, and capable resource for my project. I collected my new 3071 turbo and headed home before the weekend traffic started...
I couldn't stand the urge any longer and pulled the hater-stinger off and offered up the "new-to-me" exhaust and new turbo
I'm ecstatic to say the least! At this point the only interference was with one of the full flow fittings to the new exhaust. Easy enough work-around I expect!... Oh, AND the existing dump pipe is too small for the turbo, as is the Weber intake manifold!
Happy new year everyone! _________________
Cusser wrote: |
... Most folks are idiots when it deals with electrical !!! |
67rustavenger wrote: |
3/4 race cam? What's missing, one of the lobes? |
Paul
'68 Manx clone... Sears??
2276 built on AS21 case
W-125 w/ GB 1.25:1 rockers
Mahle forged pistons
CB 4340 crank
CB H beam rods
deep sump
44 HPMX
EMPI GTV 2 STG II wedge ports
CB Magna spark
1 5/8 merged collector w/ hater stinger |
|
Back to top |
|
|
67rustavenger Samba Member
Joined: February 24, 2015 Posts: 9770 Location: Oregon
|
Posted: Tue Jan 02, 2024 10:07 pm Post subject: Re: Slayer's glass buggy 2109 |
|
|
It appears that you're going to have a draw through turbo system on your buggy. Sweet!
What carb/EFI system do you intend on using for this build?
Has your trans been built to withstand the added torque that is sure to break a lessor trans build? _________________ I have learned over the years.
Cheap parts are gonna disappoint you.
Buy Once, Cry Once!
There's never enough time to do it right the first time. But there's always enough time to do it thrice.
GFY's Xevin and VW_Jimbo! |
|
Back to top |
|
|
slayer61 Samba Member
Joined: June 01, 2021 Posts: 1018 Location: CA
|
Posted: Wed Jan 03, 2024 7:57 am Post subject: Re: Slayer's glass buggy 2109 |
|
|
67rustavenger wrote: |
It appears that you're going to have a draw through turbo system on your buggy. Sweet!
What carb/EFI system do you intend on using for this build?
Has your trans been built to withstand the added torque that is sure to break a lessor trans build? |
Yes Sir! Draw through this time. The collection of parts I bought had a Weber DCOE 45 with it. My goal is to use that, this time. I've read that they can be difficult and bothersome to tune, so I will keep the Ron Lummus 4BBL idea for next time, if the DCOE proves to be too difficult.
The trans has indeed been built expecting to deal with a big blown motor. It was assembled with the usual goodies including a rhino case & Empi race axles.
Thanks for looking! _________________
Cusser wrote: |
... Most folks are idiots when it deals with electrical !!! |
67rustavenger wrote: |
3/4 race cam? What's missing, one of the lobes? |
Paul
'68 Manx clone... Sears??
2276 built on AS21 case
W-125 w/ GB 1.25:1 rockers
Mahle forged pistons
CB 4340 crank
CB H beam rods
deep sump
44 HPMX
EMPI GTV 2 STG II wedge ports
CB Magna spark
1 5/8 merged collector w/ hater stinger |
|
Back to top |
|
|
|