Author |
Message |
merz356 Samba Member
Joined: March 10, 2001 Posts: 528 Location: The Castle
|
Posted: Wed Jun 01, 2005 12:44 pm Post subject: |
|
|
All High Roofs have Grey colored panels up above cab area,taller panels obviously
Mark |
|
Back to top |
|
|
Scotty Samba Member
Joined: July 02, 2003 Posts: 1531 Location: Northampton - Uk
|
Posted: Thu Jun 02, 2005 12:45 am Post subject: |
|
|
EverettB wrote: |
Stanagon is correct.
What I know (could be right/wrong):
Plain panels in the front cab only unless the Kombi had the option for an interior in the rear (M502/503/504/505), then it would have had plain masonite panels in the rear as well.
M13 is supposed to be "Middle and rear seats plus panels in the cargo area" but I'm not conviced this really includes the panels. I think it is seats only.
After a certain year, all Buses have the holes there for the interior panels, they are just tiny holes because screws never got installed into them. |
This is all correct for a barndoor then? I thought they didn't have any panels in the back full stop. _________________
EverettB wrote: |
I'd be curious to know the length of his tip.
|
http://scottys-stuff.blogspot.com/ |
|
Back to top |
|
|
EverettB Administrator
Joined: April 11, 2000 Posts: 69820 Location: Phoenix Metro
|
|
Back to top |
|
|
merz356 Samba Member
Joined: March 10, 2001 Posts: 528 Location: The Castle
|
Posted: Thu Jun 02, 2005 8:26 am Post subject: |
|
|
Mine too! Although I haven't looked at the factory letter lately to confirm...it is 29,000 Original Miles and for sure came with rear seats
No panels any where in the rear!.....Just Rust!! |
|
Back to top |
|
|
Scotty Samba Member
Joined: July 02, 2003 Posts: 1531 Location: Northampton - Uk
|
Posted: Thu Jun 02, 2005 2:13 pm Post subject: |
|
|
EverettB wrote: |
My Barndoor Kombi didn't have Panels and it had M13.
Does this answer your question? |
I was pretty sure a bd kombi shouldn't have any panels in the back, so yes that does answer it thanks! _________________
EverettB wrote: |
I'd be curious to know the length of his tip.
|
http://scottys-stuff.blogspot.com/ |
|
Back to top |
|
|
Scotty Samba Member
Joined: July 02, 2003 Posts: 1531 Location: Northampton - Uk
|
Posted: Thu Jun 02, 2005 2:24 pm Post subject: |
|
|
And just to get this thread back on topic....
_________________
EverettB wrote: |
I'd be curious to know the length of his tip.
|
http://scottys-stuff.blogspot.com/ |
|
Back to top |
|
|
eeastonwest Samba Member
Joined: April 16, 2003 Posts: 39 Location: des moines, iowa
|
Posted: Thu Jun 02, 2005 2:31 pm Post subject: yippee! |
|
|
any double flippers for sale? |
|
Back to top |
|
|
Stanagon Samba Member
Joined: July 11, 2003 Posts: 4186 Location: Boston, MA
|
Posted: Thu Jun 02, 2005 9:26 pm Post subject: |
|
|
merzio, those raiders have to get past the PATS!
Jimmy P. and I hit Burbank airport next Thur. afternoon. Base of operations for us will be Pasadena for most of the weekend. Sat. night at the Crowne Plaza.
'61 Mango middle seat test fit
|
|
Back to top |
|
|
KombiMonster Samba Member
Joined: April 17, 2001 Posts: 2751 Location: Central Cal.
|
Posted: Sun Jun 05, 2005 6:48 pm Post subject: |
|
|
Yup Stan....that's the seat I need!.... _________________ FOOK CANCER
*WANTED* |
|
Back to top |
|
|
Lind Samba Member
Joined: November 06, 2000 Posts: 9915 Location: idaho
|
Posted: Sun Jun 05, 2005 9:41 pm Post subject: Re: yippee! |
|
|
eeastonwest wrote: |
any double flippers for sale? |
what year do you need? I have a spare..... _________________ .
Wanted:
Idaho VW license plate frames or other dealership items.
VWoA literature and early dealership or distributor literature/pictures/information
. |
|
Back to top |
|
|
rhd66bus Samba Member
Joined: March 22, 2005 Posts: 4 Location: too close to DC
|
Posted: Mon Jun 06, 2005 8:18 am Post subject: 'the' middle seat!? |
|
|
Hello, I have a 66rhd dd walkthrough kombi and am looking for double flippers. Anyone out there have one for sale? Thanks |
|
Back to top |
|
|
Stanagon Samba Member
Joined: July 11, 2003 Posts: 4186 Location: Boston, MA
|
Posted: Mon Jun 06, 2005 10:04 am Post subject: |
|
|
KombiMonster wrote: |
Yup Stan....that's the seat I need!.... |
I'd trade it for a 2/3 caramel middle seat in similar condition. |
|
Back to top |
|
|
RockStock Samba Member
Joined: November 26, 2004 Posts: 3929 Location: England
|
Posted: Mon Jun 06, 2005 3:59 pm Post subject: |
|
|
this ties in with JMs earlier comments (p2):
can you get a factory barndoor 6 leg middle seat with no grab handles?
how are the grab handles attached to the seat frame? are they integral? _________________ -StockRocks- |
|
Back to top |
|
|
KombiMonster Samba Member
Joined: April 17, 2001 Posts: 2751 Location: Central Cal.
|
Posted: Mon Jun 06, 2005 9:31 pm Post subject: |
|
|
Stanagon wrote: |
KombiMonster wrote: |
Yup Stan....that's the seat I need!.... |
I'd trade it for a 2/3 caramel middle seat in similar condition. |
I'll be store'n that bit of info.... ... _________________ FOOK CANCER
*WANTED* |
|
Back to top |
|
|
Lind Samba Member
Joined: November 06, 2000 Posts: 9915 Location: idaho
|
Posted: Mon Jun 06, 2005 11:41 pm Post subject: |
|
|
RockStock wrote: |
this ties in with JMs earlier comments (p2):
can you get a factory barndoor 6 leg middle seat with no grab handles?
how are the grab handles attached to the seat frame? are they integral? |
they slide into the tubing of the seat frame. they are held in place by a screw from the factory and 40 years of corrosion after the factory. _________________ .
Wanted:
Idaho VW license plate frames or other dealership items.
VWoA literature and early dealership or distributor literature/pictures/information
. |
|
Back to top |
|
|
67seablue Samba Member
Joined: May 08, 2005 Posts: 30 Location: southwest
|
Posted: Tue Jun 07, 2005 2:33 pm Post subject: |
|
|
what's the going rate for a nice full middle seat 67 only?? anying showing up at the octo show./ |
|
Back to top |
|
|
Stanagon Samba Member
Joined: July 11, 2003 Posts: 4186 Location: Boston, MA
|
Posted: Wed Jun 08, 2005 10:24 am Post subject: |
|
|
67seablue wrote: |
what's the going rate for a nice full middle seat 67 only?? anying showing up at the octo show./ |
I'm going to say $700-$1200, depending on the condition, the seller and the venue. Full length middles seem a little more common than 2/3 length seats. I've seen two full length middle seats (early 60's style with metal tube grab handles) and minimal blown-out seat seams go for $700 on eBay recently. They were then later listed here for approx. $1200. They didn't stay unsold for very long.
It's certainly worth looking at OCTO, but the best deals are going to found elsewhere, outside the scope of knowledgeable buyers and sellers.
I've said it before and I'll say it again. The thing to do is to get yourself known locally as the "old bus person". Get out there and drive your bus to local shows, cruises, whatever. Maybe even hand out business cards to other car enthusiasts (not just VW) describing what you are looking for (old VW bus parts). If you are lucky, a lead on a middle seat or other parts will find it's way to you and the prices could be very reasonable. Believe me, it happens, but you've got to be in the right place at the right time and willing to follow up on any leads right away.
-Stan |
|
Back to top |
|
|
67seablue Samba Member
Joined: May 08, 2005 Posts: 30 Location: southwest
|
Posted: Wed Jun 08, 2005 10:44 am Post subject: |
|
|
lets see what octo has to offer. $700 is my limit thanks for the reply |
|
Back to top |
|
|
Braukuche Samba Member
Joined: September 03, 2004 Posts: 11004
|
Posted: Mon Jun 13, 2005 1:08 pm Post subject: |
|
|
I spoke to the dudes from Wolfies at the Classic and they said their repro seats, and that is frame and springs, will sell for $300. Not too bad since most of the beater seats out there sell for more and have to be reupholstered and repadded and welded and ....
I asked if they will repro the handles for both the early and later style and the guys was a bit vague on that, said it wasn't planned but was possbile and likely at that.
--Dan
67seablue wrote: |
lets see what octo has to offer. $700 is my limit thanks for the reply |
|
|
Back to top |
|
|
KombiMonster Samba Member
Joined: April 17, 2001 Posts: 2751 Location: Central Cal.
|
Posted: Mon Jun 13, 2005 8:15 pm Post subject: |
|
|
So I know this seat was sold at OCTO and it wasn't anywhere near the new owners asking price here on thesamba....does this dude think all Carmel middle seats are worth $1,500? in good or bad shape or not?
I passed on purchasing the seat before it was even unloaded at OCTO...I'm looking for something alittle more cleaner.....Thank you anyway Dave.....just keep me in mind for a cleaner one eh?... _________________ FOOK CANCER
*WANTED* |
|
Back to top |
|
|
|