Which clutch kit

Mark · Posted: Fri Apr 15, 2005 8:11 pm Post subject: Which clutch kit

I did a search for this & couldn't find a satisfactory answer. My 64 bug has the original tranny. The new engine going in is the 200mm flywheel-type. Aside from clearancing the tranny for the flywheel, do I need the one with or without the throwout bearing? Thanks.

GhiaManiac · Posted: Fri Apr 15, 2005 8:47 pm Post subject:

You need the pressure plate that has the collar.
Also, are you using the original starter? If so, I'm not sure if the gear will mesh with the 200mm flywheel (original was 180mm)?

Mark · Posted: Fri Apr 15, 2005 9:46 pm Post subject:

The gear will be changed. Personally, I like how the engine cranks right up in record time with the 6V starter Very Happy


Hello! Log in or Register \| Help \| Donate \| Buy Shirts	See all banner ads \| Advertise on TheSamba.com

Forum Index -> Performance/Engines/Transmissions		Share:
		Print View

	Forum Index -> Performance/Engines/Transmissions	All times are Mountain Standard Time/Pacific Daylight Savings Time
Page 1 of 1