Author |
Message |
hotrodsurplus Samba Member
Joined: July 02, 2007 Posts: 94
|
Posted: Sun May 25, 2014 1:32 pm Post subject: transporter door-pocket dimensions |
|
|
I might be able to use the early transporter door pockets on a job I'm doing but I need to know one thing: dimensions. I searched and found plenty of information about how to install them and where to find the ABS replacements but nothing about what size they are.
If nobody has dimensions on hand could a generous soul throw a tape on one for me?
Thanks in advance,
chris |
|
Back to top |
|
|
campingbox Samba Member
Joined: November 14, 2000 Posts: 10196 Location: Petaluma, CA
|
Posted: Sun May 25, 2014 9:00 pm Post subject: |
|
|
The pockets Clara makes measure about 8" X 9.75" on the inside edges of the bowl. This is an exact copy of the mint original one she used as a template, although we have a stack of ratty used originals here in the shop and they do not all measure exactly the same size as the one we copied. |
|
Back to top |
|
|
hotrodsurplus Samba Member
Joined: July 02, 2007 Posts: 94
|
Posted: Mon May 26, 2014 6:02 am Post subject: |
|
|
campingbox wrote: |
The pockets Clara makes measure about 8" X 9.75" on the inside edges of the bowl. This is an exact copy of the mint original one she used as a template, although we have a stack of ratty used originals here in the shop and they do not all measure exactly the same size as the one we copied. |
Thanks a bunch for that info, Greg. That's exactly what i was looking for. About how deep are they? |
|
Back to top |
|
|
framed Samba Member
Joined: April 10, 2010 Posts: 36 Location: Finland
|
Posted: Mon May 26, 2014 10:17 am Post subject: |
|
|
I have saved originals taken off my -56 ambulance.
Measured them and inside dimensions were 240mm x 195mm.
Depth 40mm measured from mounting surface. (millimetres) |
|
Back to top |
|
|
campingbox Samba Member
Joined: November 14, 2000 Posts: 10196 Location: Petaluma, CA
|
Posted: Mon May 26, 2014 10:39 am Post subject: |
|
|
hotrodsurplus wrote: |
campingbox wrote: |
The pockets Clara makes measure about 8" X 9.75" on the inside edges of the bowl. This is an exact copy of the mint original one she used as a template, although we have a stack of ratty used originals here in the shop and they do not all measure exactly the same size as the one we copied. |
Thanks a bunch for that info, Greg. That's exactly what i was looking for. About how deep are they? |
The pockets Clara makes are about 1.75" deep. |
|
Back to top |
|
|
|