which fuse should I use?

aussie01 · Posted: Thu Apr 13, 2006 5:21 pm Post subject: which fuse should I use?

I am hooking up oil temp and pressure guages in my 67 sqbk and I am ready to hook up to the fuse box.Which is the best fuse to ad onto as per this wiring diagram?
http://www.thesamba.com/vw/archives/info/wiring/type3_1600_67.jpg
or this
http://www.thesamba.com/vw/archives/info/wiring/67type3fuses.jpg

I think I can use the 4th fuse from the right(stop lights/turn signals) it tests with a volt meter to be only hot when the ignition is on.

I want to make sure i am doing the right thing before i do this.

Russ Wolfe · Posted: Thu Apr 13, 2006 5:36 pm Post subject:

Fuse with a factory black wire, is the one you want. That is hot with the key on.
_________________
Society is like stew. If you don't keep it stirred up, you end up with a lot of scum on the top!--Edward Abbey

Gary: OK. Ima poop.

aussie01 · Posted: Thu Apr 13, 2006 5:55 pm Post subject:

stop light/turn signal fuse has a black wire and a black/red wire.

Russ Wolfe · Posted: Thu Apr 13, 2006 6:27 pm Post subject:

That is the one you want. T/S brake Lights.
_________________
Society is like stew. If you don't keep it stirred up, you end up with a lot of scum on the top!--Edward Abbey

Gary: OK. Ima poop.


Hello! Log in or Register \| Help \| Donate \| Buy Shirts	See all banner ads \| Advertise on TheSamba.com

	Forum Index -> Type 3	All times are Mountain Standard Time/Pacific Daylight Savings Time
Page 1 of 1