What is a good size compressor?

Mike Molzen · Posted: Sat May 14, 2011 10:58 pm Post subject:

I bought a 60 gallon 220 volt upright air compressor from Harbor Frieght about 3 years ago to paint my Nissan Sentra. It ran all of my air tools including my HVLP, DA sander, and other high air consumption tools without a problem. It so happens that it is exactly like the Kobalt model sold at my local Lowes store for significantly cheaper price. I know that a lot of people think Harbor Freight tools are cheaper because many are made in China, but after all, almost all name brand tools are now made in China anyway. Also, I have not had any problems with this unit since I have owned it. I unfortunatly had a lady run a red light and total the car this January. The insurance adjuster commented on how nice the paint job was for the car's age (1999) he didn't realize it had been repainted. I hope this helps, Mike

Robertjm · Posted: Sat Sep 03, 2011 11:39 am Post subject:

http://www.harborfreight.com/merchandising-promoti...67501.html

They have this on sale at Harbour Frieght this weekend. It has 125 PSI, but it doesn't list CFM.

Any thoughts (besides "if it's HF it's junk)?
_________________
1967 VW Double Cab Pickup
2003 Mercedes ML-500
1995 Saab 900SE Turbo Convertible (Crossed over into Valhalla April 2014)
1972 VW Squareback (Autobahn in the Sky - July 1987)

hpw · Posted: Sat Sep 03, 2011 11:51 am Post subject:

Robertjm · Posted: Sat Sep 03, 2011 12:05 pm Post subject:

Thanks how. Couldn't be more obvious. Embarassed

_________________
1967 VW Double Cab Pickup
2003 Mercedes ML-500
1995 Saab 900SE Turbo Convertible (Crossed over into Valhalla April 2014)
1972 VW Squareback (Autobahn in the Sky - July 1987)

hpw · Posted: Sat Sep 03, 2011 12:09 pm Post subject:

BusterBrown · Posted: Thu Sep 08, 2011 10:26 pm Post subject:

Hi Folks,

I'm about to set up a 60 gallon, 5 HP compressor at my shop, and have a question that I don't see as having been addressed here before. What would you all recommend for an inline filter/dryer for general use? My intentions are to use air for grinding, cutting, polishing, air ratchet/tools, and yes, spray painting. In other words; a multitude of uses. I don't want to spend a fortune, and I see that Eastwood carries a few models in the $200-$400 range. Anybody know of a good source for a deal on a decent quality filter?

Thanks in advance! Very Happy

_________________
1978 Sage Green Westfalia (Happy Trails, SOLD)
1977 Transporter

Life is short. Can I have some of yours?

odecom5 · Samba Member Joined: July 17, 2006 Posts: 457 Location: CO

Looks like this thread is rarely responded to anymore, but I'll ask here for fear of making somebody angry by starting a new thread Smile

Are there any compressors out there that are 110v that can handle an HVLP gun and some sanding?

I need to buy a compressor to do work on my bus, but a) I can't afford a professional body shop one that everybody demands you have if you are going to do any sort of body work, and b) it really isn't worth the money for occasional hobby usage to buy one of those... finally, c) my garage is not equipped with 220v, so that makes it even harder. The best I have found in my hours long searching seems to be this one: http://www.sears.com/shc/s/p_10153_12605_00916474000P

It offers 7.2 SCFM @ 40psi, and 5.8 SCFM @ 90psi. I know this is below any of the 220v ones, however, the HVLP spray guns say they only require 5.1-5.5 on the ones that I have seen.

Any input is greatly appreciated. Thanks!

Robertjm · Posted: Sat Dec 10, 2011 2:56 pm Post subject:

I cannot speak to the quality, but the CFM certainly should cover it. Check out Craigslist, if you don't mind buying used. I ended up getting a Devilbis used for $150, which gives out 8.2 40 psi!

BusterBrown · Posted: Sat Dec 10, 2011 3:36 pm Post subject:

Mike Fisher · Posted: Sat Dec 10, 2011 3:41 pm Post subject:

You should be ok for painting, but should just buy electric sanders.
_________________
https://imgur.com/user/FisherSquareback/posts
69 FI/AT square Daily Driver
66 sunroof,67,70,71,71,71AT,72,72AT,73 Parts
two 57 oval ragtops sold
'68 Karmann Ghia sold

Society is like stew. If you don't keep it stirred up you end up with a lot of scum on the top! - Russ_Wolfe/Edward Abbey

odecom5 · Samba Member Joined: July 17, 2006 Posts: 457 Location: CO

vdubyah73 · Posted: Sun Dec 11, 2011 3:38 am Post subject:

if you have an electric dryer you can plug a single phase 220v compressor into the dryer outlet.
_________________
burning down the house

73 bounty hunter, sold.
'77 transporter, junked had crotch rot.
Dubless, but have a CPR built stroker waiting for a new to me Beetle
'93 Fleetwood Bounder 34'

Kudagra · Posted: Wed Oct 03, 2012 7:14 pm Post subject:

Image may have been reduced in size. Click image to view fullscreen.

Volksair.

I might have $500. But i'm a scrounger. I got my 60 gallon tank for free. I have a video of it running somewhere. Now that i'm moving my shop to a commercial area I can run it anytime of the night. Much to the displeasure of my soon to be neighbors i'm sure.
_________________
But Mom...it followed me home!

volksgroove · Posted: Thu Mar 14, 2013 3:45 am Post subject:

vdubyah73 · Posted: Thu Mar 14, 2013 5:03 am Post subject:

You can plug a 220v single phase compressor into an electric dryer outlet.
_________________
burning down the house

73 bounty hunter, sold.
'77 transporter, junked had crotch rot.
Dubless, but have a CPR built stroker waiting for a new to me Beetle
'93 Fleetwood Bounder 34'

SoCalJes · Posted: Thu Jul 04, 2013 2:19 pm Post subject:

Anyone ever work with a rotary screw compressors? Instant psi and cfm plus there is no tank, noise or pressure pulse. Not cheap but dream setup. Wink

_________________
Jesse
71 Ghia
______________________________________
Just because it didn't come that way, doesn't mean it shouldn't have.

nice dad · Posted: Sat Mar 01, 2014 8:08 pm Post subject:

http://www.harborfreight.com/5-hp-60-gallon-165-psi-two-stage-air-compressor-93274.html#.UxKf8PldWDU
_________________
1967 Single Cab

kman · Posted: Fri May 30, 2014 3:48 am Post subject:

scottmc · Posted: Wed Jul 02, 2014 5:37 pm Post subject:

So my original compressor state's 8@40 6.5 @90. With a 20 gallon tank. I want to tie a 26 gallon tank to it so the total will be 46 gallons. My other option is 46 gallons with the two tanks but the motor is 220 volts and the compressor is rated @ 9@40 7.5@90. Now the question is 220 v or 110v. I can go either way. I need to add more power to the garage anyways so which should I build. No Sanders or blast cabinets. I'm only looking for a good storage capacity for a hvlp. I already have the extra romex for 110 but if 220 is the way to go i don't care about the cost.

jpeters · Posted: Mon Jul 27, 2015 7:50 am Post subject:

Anyone have any good recommendations for a 110v 60-80 gallon compressor? Budget isn't really an issue, but I'd like to be under $800 if possible. Mostly just needed for paint gun and impacts. Probably less for sanding, etc, but might use it for that if it can hold up.

I've read this thread several times over the last several years. Just wondering if anyone has any recent experience.
_________________
'73 Westy
'68 Westy http://www.thesamba.com/vw/forum/viewtopic.php?t=484180
'65 Westy SO-42 http://www.thesamba.com/vw/forum/viewtopic.php?t=435614
'66 Bug
'63 Bug (Big Bore 40hp)

@neverdnf on Instagram


Hello! Log in or Register \| Help \| Donate \| Buy Shirts	See all banner ads \| Advertise on TheSamba.com

What is a good size compressor?
Page: Previous 1, 2, 3, 4, 5, 6, 7, 8, 9 Next

	Forum Index -> Body/Paint	All times are Mountain Standard Time/Pacific Daylight Savings Time Page: Previous 1, 2, 3, 4, 5, 6, 7, 8, 9 Next
Page 8 of 9