Viewing feedback for: Keoki Email: [email protected] Last Visited: Today |
Author |
Message |
dlc_b0z Samba Member
Joined: February 23, 2006 Posts: 801 Location: Bradenton, FL
|
Posted: Tue Apr 29, 2008 3:55 pm Post subject: |
|
|
Just got my 6" beam from George. Very nice guy. Told him I needed it quick for a ride and he had it built and at my door in FL in less than a week. The beam is extremely high quality and clean. Thanks George.
Boz _________________ Boz
dirtylawnchair |
|
Back to top |
|
|
busparts Samba Member
Joined: July 28, 2003 Posts: 246 Location: does it matter as long as i am here
|
Posted: Mon Jun 30, 2008 6:31 pm Post subject: |
|
|
Just got my beam in today. nice welds. could not ask for a better beam.
I am thinking to buy a nother bug so I can get another beam.
U the man
thanks again
Ben |
|
Back to top |
|
|
M_Fish Samba Member
Joined: June 18, 2008 Posts: 51 Location: Bay Area
|
Posted: Thu Sep 04, 2008 11:07 pm Post subject: Sweet Beam |
|
|
I did some research and read quite a bit and talked with some friends, and then ordered my 4" beam from George. It arrived quick, packed cleanly, and is very solid. One thing George doesnt mention is the shock mounts that allow for different shock heights - this allows some additional flexibility in choosing your specific shock absorber setup.
Just a note - the urethane bushings normally take silicone grease - the kind that only comes in tiny little tubes - silicone based so it won't swell or erode rubber or urethane bushings - but as an alternative, you can use synthetic grease for urethane, and at the same time find tubes big enough to fit into a grease gun - so the end result is that you can drill and tap some grease fittings onto georges beams very easy, and simply use synthetic grease in a grease gun instead of little tubes. |
|
Back to top |
|
|
eastcoastconversions Samba Member
Joined: July 20, 2006 Posts: 205
|
Posted: Fri Sep 05, 2008 5:12 pm Post subject: |
|
|
I purchased one of George's 5" narrowed beams too. I must say I am very impressed with the communications, the very fast shipping and quality of the product!
Thanks George, greatly appreciated,
Jeff Munn
Fredericton, NB Canada |
|
Back to top |
|
|
73orangbus Samba Member
Joined: December 01, 2008 Posts: 18 Location: lub tx
|
Posted: Sat Feb 28, 2009 7:19 am Post subject: great experiance |
|
|
morning guys .just a note to let others know how far george will go to make things right.i bought a header from him for my bug,fedex deliverd it to wrong street address .the people at that address stole the part .i tryed many times to recover part .fedex made a feeble attempt with no sucsess.fedex did not want to take responsibilty .george stepped up and filed a claim even thought he was not at fault .after some time george was able to recover the money from fedex.he is a busy man but he will take care of his customers .thanks again george |
|
Back to top |
|
|
50ate Samba Member
Joined: September 22, 2007 Posts: 1171 Location: Rainier/Olympia Washington
|
Posted: Sun Apr 26, 2009 11:23 am Post subject: |
|
|
called him up to get a 5in L/P for my buddies first acvw im local to him stoped by paid the man (even had a beer with him) went over next day and the beam was perfect painted and all.. Super nice down to earth and no BS kinda guy.. started talkin shop and i mentiond i needed an early T/S switch for my 58 he dug around for a min a just like that i had an OG 6 wire in perfect shape for a VERY reasonable price(way cheaper than what i could get else where).. Bottom line is this guy is here to help us not to rape us on prices..He is a VW guy not a salesman!!! when i was lookin for beam for my 58 i called him and he talked me through it and i made my own.. how many vendors would do that?? my buddie Paid 250 for his beam compleet with adj and bushings perfectly painted and got it the next day.. There is somthing to be said about that.. Plus the guy gave me a beer
I can make my own beams but i will buy my next from him because there done so fast and perfect paint and finish andi dont have to mess with no greasy ass old beam.. |
|
Back to top |
|
|
BWD Samba Mailman
Joined: August 23, 2002 Posts: 2154 Location: In bed.
|
Posted: Sat Jun 27, 2009 6:25 am Post subject: |
|
|
I ordered some parts from George, very smooth transaction, fast shipment.
George is a good seller, don't hesitate to buy from him! _________________ BWD
JHC
member #2850
1966 Beetle
_____________________________ |
|
Back to top |
|
|
scvw Samba Member
Joined: September 02, 2006 Posts: 3544 Location: South Carolina
|
Posted: Thu Jul 02, 2009 4:43 pm Post subject: |
|
|
George is a good and honest man to do business with. Payment was incredibly fast and emails were responed to quickly. Thanks again for the purchase and we can do business again soon. _________________ 58 Coral Red ragtop(Diana's car)
57 PG/SG standard
63 Ruby Red SC
SOUTHERN INTEGRITY AIRCOOLERS
WTB - Sigla popout glass like in my ad.
http://www.thesamba.com/vw/classifieds/detail.php?id=1667775 |
|
Back to top |
|
|
Masoud Samba Member
Joined: March 01, 2004 Posts: 51 Location: Palma de Mallorca
|
Posted: Fri Jul 24, 2009 3:51 pm Post subject: |
|
|
Beautiful Narrowed beam , very high quality , George is one of the best i have ever dealt with
My car and i thank you |
|
Back to top |
|
|
ksteckel Samba Member
Joined: August 05, 2008 Posts: 44 Location: Burr Ridge, Illinois
|
Posted: Fri Aug 07, 2009 9:43 am Post subject: |
|
|
I bought a set of vent wing windows from George. His description was accurate and he shipped them fast too. I would buy from him again without hesitation. Thanks George! |
|
Back to top |
|
|
BWD Samba Mailman
Joined: August 23, 2002 Posts: 2154 Location: In bed.
|
Posted: Sat Sep 19, 2009 6:43 am Post subject: |
|
|
Another quick and easy deal with George!
I owe you one! _________________ BWD
JHC
member #2850
1966 Beetle
_____________________________ |
|
Back to top |
|
|
bond007 Samba Member
Joined: April 05, 2002 Posts: 284 Location: Durham, NC
|
Posted: Sat Sep 19, 2009 5:57 pm Post subject: |
|
|
Got a washer bottle from George. Excellent transaction.
Thanks! |
|
Back to top |
|
|
ViLL Samba Member
Joined: September 07, 2009 Posts: 263 Location: La casa de tu pinche madre guey!
|
Posted: Sun Oct 11, 2009 8:10 am Post subject: |
|
|
Bought a 5" narrowed beam from George this past week. Top notch service, good guy to deal with.
Thanks George! |
|
Back to top |
|
|
Agave58 Samba Member
Joined: March 14, 2008 Posts: 1190 Location: Central California
|
Posted: Mon Nov 23, 2009 8:21 pm Post subject: |
|
|
Just picked up a a complete set of low backs and rear seat from George. The items were packed very well and were shipped promptly.
Thank You George _________________ 1958 Agave Beetle (0\_!_/0)
Stateside Motors Inc
501 Foote Ave
Jamestown, New York 14701
Stateside Imported Cars/Motors Items Wanted
Sunland Motors
2030 Fremont St Las Vegas, Nevada
Sunland Motors Items Wanted |
|
Back to top |
|
|
66DC Samba Member
Joined: April 14, 2007 Posts: 32 Location: In the Garage
|
Posted: Mon Jan 11, 2010 11:14 pm Post subject: Narrowed beam |
|
|
I purchased one of his beams been sitting in my garage for over a year I finally got a chance to get it installed, and he does great work!
I would recommend his beams to anyone.
Great work. |
|
Back to top |
|
|
sixtythree_bug Samba Member
Joined: March 14, 2009 Posts: 177 Location: Tacoma, WA
|
Posted: Wed Feb 17, 2010 8:08 am Post subject: 1963 Beetle I bought |
|
|
George is a great guy and easy to deal with. I bought his '63 off of him a while ago and thought I would post up feedback on him. George knew I was a novice at these things and took the time to show me the quick basics and said I could call anytime if I needed assistance on anything. I have called him a few times and he has been more than happy to give a hand.
George demands top dollar for his products, but I would rather pay top dollar from him than to pay a smaller price elsewhere for a lesser product. If you are going to make a purchase from George, you need not to worry, because the man doesn't buy junk so he won't sell junk either. If he does, he will definitely tell you what he has. |
|
Back to top |
|
|
rpwrangler Samba Member
Joined: September 30, 2008 Posts: 65 Location: NE Arkansas
|
Posted: Sat Apr 03, 2010 6:56 pm Post subject: |
|
|
I bought a pair of spindles from George. Can't believe how fast they got here. Thanks George! |
|
Back to top |
|
|
jeff plock Samba Member
Joined: February 11, 2010 Posts: 51 Location: golden co
|
Posted: Thu May 13, 2010 6:02 pm Post subject: george is very helpful |
|
|
bought a 4" narrowed beam from george the quality was awsome his paint is second to none and his friendly service is rare we should all strive to be as honest as he is thanx brother. jeff plock _________________ love doing fab work have anyquestions send me an e mail maybe i can help |
|
Back to top |
|
|
Lee. Samba Animal Controller
Joined: December 22, 2003 Posts: 3079 Location: Denver, CO
|
Posted: Mon Aug 23, 2010 10:40 pm Post subject: |
|
|
George bought a bunch of parts, gave me some ideas about packing and shipping and paid earlier than I asked.
No BS, no stars on beams, no lowballing, he's a straight up guy.
Thanks & I hope you're happy with everything. _________________ www.DenverWildlifeControl.com |
|
Back to top |
|
|
Michael Pitton Samba Member
Joined: March 07, 2010 Posts: 2 Location: Seattle, WA
|
Posted: Thu Feb 03, 2011 11:13 am Post subject: Keoki |
|
|
Hey Everybody, I have been doing business with Keoki (George Moore) for some time now, but now, he has gone above and beyond. I bought a 4" beam from him last spring and installed it in my 68 sedan. Worked really well until last week when I discovered it needed a little fix. Called George that day, he said to get it to him and he would fix it, no problem , no charge! Turnaround time: 2 days! Best customer service, bar none! Nice to know there are still people like George doing business like this! Thanks again buddy. |
|
Back to top |
|
|
|