Hello! Log in or Register   |  Help  |  Donate  |  Buy Shirts See all banner ads | Advertise on TheSamba.com  
TheSamba.com
 
Spot Weld Cutters
Page: Previous  1, 2, 3, 4
Forum Index -> Body/Paint Share: Facebook Twitter
Reply to topic
Print View
Quick sort: Show newest posts on top | Show oldest posts on top View previous topic :: View next topic  
Author Message
spectre6000
Samba Member


Joined: April 19, 2009
Posts: 2014
Location: Broomfield, CO
spectre6000 is offline 

PostPosted: Sun Nov 15, 2009 5:42 pm    Post subject: Reply with quote

I've been using the above Blair cutter in a regular drill, and it works pretty well insofar as I can tell. I got 312 welds cut with the first cutter (comes with three) before I decided to go ahead and change it (probably could have done quite a few more if I wanted to stretch it), so it seems to be reasonably durable.
_________________
Jason Hopper

-'58 German Market Deluxe Beetle (in progress)
-'84 M1009 CUCV
-'81 K10
"Buy the best, cry once." -Gene Berg
"A cheap man will always buy the cheapest thing available, and then buys another one hoping for a better result, and then spends the rest of his life in misery complaining about it. A thrifty man will buy a good part once and never think about it again." -RockCrusher
"Don't feed the Shitty Parts Monster!" -Me
Back to top
View user's profile Send private message Send e-mail Gallery Classifieds Feedback
WrennMetallWerks
Samba Member


Joined: December 06, 2007
Posts: 2616
Location: Rescue ca
WrennMetallWerks is offline 

PostPosted: Sun Nov 29, 2009 11:44 pm    Post subject: Reply with quote

zuggbug wrote:
jmillers62 wrote:
I just bought this one.

Image may have been reduced in size. Click image to view fullscreen.


I'll never use anything else.


I have been using these bits with a drill - very slow go and a lot of elbow grease - I just bought a Rigid impac driver
Image may have been reduced in size. Click image to view fullscreen.

had to modify the bit a little but MAN!!!! Very Happy Very Happy it cut thru the metal like a hot knife cuts thru butter.

has it seemed to be long lasting for you... mine seem to work great at first but then lost its fight and just wanted to jump around... then again.. i made it thru a whole split bus roof transplant.. just for the price i hoped it wud had lasted me longer... Laughing Laughing Laughing
_________________
⚒ Believe In The Power Of Positive Thinking ⚒

Purpose Over Pleasure 🕊

“Hard Werk ⚒ God First “

https://music.youtube.com/watch?v=0-PSeV52tZ4&si=wpcuRnQyvIFo2nCJ
https://music.youtube.com/watch?v=PaCorLXzC5w&si=cbzT8fjlzVlIWfSV
https://music.youtube.com/watch?v=_aoE5aYSutY&si=mkZKPxd_41QA1kfs
https://music.youtube.com/watch?v=_NzUyyVexAE&feature=share
https://music.youtube.com/watch?v=UI8yUrIWS7E&feature=share
Back to top
View user's profile Send private message Gallery Classifieds Feedback
burnt63
Samba Member


Joined: February 06, 2005
Posts: 79
Location: south nj
burnt63 is offline 

PostPosted: Mon Nov 08, 2010 3:31 pm    Post subject: Reply with quote

The_Codeman wrote:
is used one of these from harbor freight when i replaced my front apron/tire tray.
3/8 is a little large but it did work very well for $4

Image may have been reduced in size. Click image to view fullscreen.

http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=95343
codeman

i used this to remove a rear apron. did the job with no problems. 3/8 was a little large like mentioned before.
_________________
'63 bug...'67 bug... '87 cabriolet... '08 rabbit
Back to top
View user's profile Send private message Instagram Classifieds Feedback
noexit
Samba Member


Joined: September 18, 2006
Posts: 329
Location: Tacoma, WA
noexit is offline 

PostPosted: Fri Dec 31, 2010 1:17 am    Post subject: Reply with quote

burnt63 wrote:
The_Codeman wrote:
is used one of these from harbor freight when i replaced my front apron/tire tray.
3/8 is a little large but it did work very well for $4

Image may have been reduced in size. Click image to view fullscreen.

http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=95343
codeman

i used this to remove a rear apron. did the job with no problems. 3/8 was a little large like mentioned before.


I used the harbor freight one to remove my floor pans. I wire bush everything to get the spot welds to show themselves, then hit each weld with a punch to keep the bit from walking. Apply moderate pressure for the first few seconds while the blade starts to cut, then you can bear down on it. You'll often hear a pop of feel it give when it breaks through the first layer.
Back to top
View user's profile Send private message Visit poster's website Gallery Classifieds Feedback
girlnouveau
Samba Member


Joined: February 06, 2009
Posts: 175
Location: PA
girlnouveau is offline 

PostPosted: Sat Apr 09, 2011 7:44 pm    Post subject: Reply with quote

I have a 7amp B&D drill and picked up some of those bullet/pilot tips drill bits in 1/8 people recommended. They did a nice job on my headlight buckets.

Before my Bug, my tools were only used for random household or art projects. I went through like 10 before it even occurred to me that maybe it wasn't right for the job. Any new tools I bought for the Bug I got heavy duty ones, the ones I already had, I didn't even think about it.

Truth be told I was using my husband's scratch awl to center punch, and then I broke it after 8 spot welds. (Brilliant, I know.) Without the punch the drill seemed to struggle and I didn't want to bear down on it and then break the drill too.

What's a good sized regular drill for this job?





Getting a real center punch is on my to-do list tomorrow.
Back to top
View user's profile Send private message Classifieds Feedback
AutoGuru
Samba Member


Joined: May 03, 2011
Posts: 1
Location: Minnesota
AutoGuru is offline 

PostPosted: Tue May 03, 2011 10:04 am    Post subject: We use ABDS spot weld cutters Reply with quote

We found these guys a few months ago and have been using there bits ever since. I spoke with the owner and they specialize in spot weld cutters, USA made. They are tough as nails and priced well. I think the owners name is Mike.

http://www.autobodydrill.com/

[/url]
Back to top
View user's profile Send private message Classifieds Feedback
WoodyAlan
Samba Member


Joined: April 01, 2005
Posts: 169
Location: Port Orange, FL
WoodyAlan is offline 

PostPosted: Wed Jun 01, 2011 5:26 am    Post subject: Reply with quote

Used a step drill bit on my bus floor to remove welds; fast and easy;
Cheap set from Harbor Great did the trick.
_________________
"My other car is a VW"
'90 Cabriolet
'03 Passat GLX Wagon
Aircooled gone but not forgotten!
Back to top
View user's profile Send private message Gallery Classifieds Feedback
ALIEN3T
Samba Member


Joined: August 16, 2007
Posts: 22
Location: O.C. The Real
ALIEN3T is offline 

PostPosted: Thu Oct 06, 2011 8:58 pm    Post subject: Re: We use ABDS spot weld cutters Reply with quote

AutoGuru wrote:
We found these guys a few months ago and have been using there bits ever since. I spoke with the owner and they specialize in spot weld cutters, USA made. They are tough as nails and priced well. I think the owners name is Mike.

http://www.autobodydrill.com/

[/url]


I like the prices and choices from here.

Does anyone know what spot weld cutters from here be the best. and what diameter? I'm ready to order them but the company has no phone number on the site. The work I'm doing I'm at a stand still till i split all the spot welds. I tried the HF hole bit looking one, Keeps going through both pieces to easy. Some weld I'm removing for good, Some I'm splitting then want to be able to reattach later.


Thank you.
Back to top
View user's profile Send private message AIM Address Classifieds Feedback
Evil_Fiz
Samba Member


Joined: May 06, 2011
Posts: 1031
Location: Jacksonville, FL
Evil_Fiz is offline 

PostPosted: Sat Oct 29, 2016 5:03 pm    Post subject: Reply with quote

noexit wrote:
...I used the harbor freight one to remove my floor pans. I wire bush everything to get the spot welds to show themselves, then hit each weld with a punch to keep the bit from walking. Apply moderate pressure for the first few seconds while the blade starts to cut, then you can bear down on it. You'll often hear a pop of feel it give when it breaks through the first layer.

I followed the same process with the HF spot weld cutter. It was $5 and I did about 125 floor pan spot welds with one side of the cutter before I had to flip it over. I did not have any of the sticky cutting oil/compound many have recommended but WD-40 and low speed worked just as well.
_________________
“…It's not just about what's interesting. It's also about what's helpful, and it's helpful even if it helps just one other guy working on a Ghia.”
kiwighia68

See my build on TheSamba at:
The K_R_A_K_E_N_N : a 70 Ghia Convertible reinterpreted
Back to top
View user's profile Send private message Visit poster's website Instagram Gallery Classifieds Feedback
Busstom
Samba Member


Joined: November 23, 2014
Posts: 3789
Location: San Jose, CA
Busstom is offline 

PostPosted: Tue Sep 04, 2018 11:24 am    Post subject: Reply with quote

KYbuggy1 wrote:
I drill more spot welds than I care to remember, every day practically. This is the back , elbow and wrist saving"est" tool I've ever purchased:
http://www.dentfix.com/viewItem.asp?idProduct=17&a...SS_Capable
Nearly effortless.

Hard to swallow the price at first, but WELL worth it in the long run. A hobbyist would never wear it out if it wasnt abused. Comes with an inline oiler attached.

And if you cant get to the backside, you can remove the clamp and it still works better than any spotcutter bit out there, and I've tried every single new thing that came along on the tool trucks until I bought the spitznagel.

The link above is dead, here is an updated link:
https://www.dentfix.com/shop-1/Spot-Annihilator-Deluxe-Kit-p65881292
Back to top
View user's profile Send private message Gallery Classifieds Feedback
Display posts from previous:   
Reply to topic    Forum Index -> Body/Paint All times are Mountain Standard Time/Pacific Daylight Savings Time
Page: Previous  1, 2, 3, 4
Page 4 of 4

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

About | Help! | Advertise | Donate | Premium Membership | Privacy/Terms of Use | Contact Us | Site Map
Copyright © 1996-2023, Everett Barnes. All Rights Reserved.
Not affiliated with or sponsored by Volkswagen of America | Forum powered by phpBB
Links to eBay or other vendor sites may be affiliate links where the site receives compensation.