Author |
Message |
bigbulli Samba Member
Joined: September 30, 2000 Posts: 575 Location: ENGLAND
|
Posted: Sun Jul 09, 2006 11:50 am Post subject: Small back window hatch lock removal...... |
|
|
I'm trying to get the lock and t-handle out. I have undone the 4 screws on the lock and removed the hex head nut / washer but it still wont come out, am I missing something? What do I need to do to remove it? _________________ 1954 Barndoor
1955 Oval |
|
Back to top |
|
|
campingbox Samba Member
Joined: November 14, 2000 Posts: 10196 Location: Petaluma, CA
|
Posted: Sun Jul 09, 2006 5:24 pm Post subject: |
|
|
In our '56 Westy the t-handle shaft was stuck inside the latch and I had to totally destroy the latch to get the handle to come off. If I wasn't worried about preserving the original interior paint I would have heated it up and sprayed some water on it to cool it. |
|
Back to top |
|
|
Campy Samba Member
Joined: January 10, 2005 Posts: 4933 Location: Chico, CA
|
Posted: Mon Jul 10, 2006 12:16 am Post subject: |
|
|
One of my buses had one that was stuck and I think that I, carefully, tapped it with a hammer. |
|
Back to top |
|
|
BUCIOBATISTI Samba Member
Joined: April 17, 2002 Posts: 6956 Location: San Diego, California, USA
|
Posted: Mon Jul 10, 2006 12:54 am Post subject: Re: Small back window hatch lock removal...... |
|
|
bigbulli wrote: |
I'm trying to get the lock and t-handle out. I have undone the 4 screws on the lock and removed the hex head nut / washer but it still wont come out, am I missing something? What do I need to do to remove it? |
Muscle it Longshanks, let it know who its Daddy is. _________________ Please check us out on Instagram at @holygrailgarage
That's the best place to see the latest things we are up to as well as catch an occasional sneak peek of our latest car and parts listings! |
|
Back to top |
|
|
bigbulli Samba Member
Joined: September 30, 2000 Posts: 575 Location: ENGLAND
|
Posted: Mon Jul 10, 2006 12:26 pm Post subject: |
|
|
Thanks Guys, I belt it with a hammer but it didnt budge so I split the casing of the lock and cut the shaft with a 3 inch zip disk. WHO's THE DADDY!
The door is for the wall so the lock was not needed! _________________ 1954 Barndoor
1955 Oval |
|
Back to top |
|
|
BUCIOBATISTI Samba Member
Joined: April 17, 2002 Posts: 6956 Location: San Diego, California, USA
|
Posted: Mon Jul 10, 2006 3:22 pm Post subject: |
|
|
bigbulli wrote: |
Thanks Guys, I belt it with a hammer but it didnt budge so I split the casing of the lock and cut the shaft with a 3 inch zip disk. WHO's THE DADDY!
The door is for the wall so the lock was not needed! |
Are you taking the piss, Rich??? Whipping out the zip disk straight away. Good boy.
Cheers,
Linda _________________ Please check us out on Instagram at @holygrailgarage
That's the best place to see the latest things we are up to as well as catch an occasional sneak peek of our latest car and parts listings! |
|
Back to top |
|
|
|