Author |
Message |
boboskips Samba Member
Joined: November 06, 2005 Posts: 74 Location: San Clemente, CA
|
Posted: Wed Jan 03, 2007 6:57 pm Post subject: Help identifying what goes where (photos) |
|
|
Howdy Folks, I'm trying to hook up all my hoses and wiring and could use some help identifying what connects to what. Thanks for your help!
(1) comes off the heater-blower fan, not sure where it connects
(2) vac advance cutoff... does it need to be connected?
Where should hose terminate that is connected here on the left side of the fan shroud?
What is this and what connects to it? It is on the same harness as the blower fan plug.
What hoses connect here (1 & 2) and where do they terminate?
Thanks again for your help!
_________________ Bobo
'73 Transporter
Stock 1700cc engine
"Miles from nowhere
I Guess I'll take my time" |
|
Back to top |
|
|
busdaddy Samba Member
Joined: February 12, 2004 Posts: 51125 Location: Surrey B.C. Canada, but thinking of Ukraine
|
Posted: Wed Jan 03, 2007 9:29 pm Post subject: |
|
|
In your first pic. the fan wires should go to the relay which I can't see (may be missing) The vac. advance cutoff connects to a gray cable with a black cone shaped boot that comes from the trans.. VW put it there for a reason so it must be useful.
The tube in your second pic. goes to the charcoal canister.
Wires in the third pic are also related to blower fan relay or egr switch, consult the wiring diagrams. (sorry it's been a few months since Iv'e had my head in my engine compartment that deep)
Hose fittings on A/C go to the charcoal canister and crankcase breather (not sure which is which, mines a 72) _________________ Rust NEVER sleeps and stock never goes out of style.
Please don't PM technical questions, ask your problem in public so everyone can play along. If you think it's too stupid post it here
Stop dead photo links! Post your photos to The Samba Gallery!
Слава Україні! |
|
Back to top |
|
|
|