Author |
Message |
RockStock Samba Member
Joined: November 26, 2004 Posts: 3929 Location: England
|
Posted: Wed Dec 20, 2017 8:30 am Post subject: Re: Reproduction Cargo Floor Mats - interest? |
|
|
Nice mat...and thank you for the confirmation photos! _________________ -StockRocks- |
|
Back to top |
|
|
kalymnos Samba Member
Joined: January 22, 2010 Posts: 112 Location: Hamburg/Germany
|
Posted: Tue Dec 19, 2017 11:06 am Post subject: |
|
|
RockStock wrote: |
Looks like it was just one universal mat version produced for both rhd and lhd (or maybe more correctly 'rh cargo doors or lh cargo doors')
However, each mat looks like it was then hand-snipped on the cargo door side, front and rear corners, to accommodate the b-post and c-post. Ie a small rectangular section removed front & rear.
The c-post cut-out is longer than the b-post cut-out. The square strengthening ribs on the back finish early (different front & back) to allow for these cuts. And I guess this fade-out detail is mirrored on the opposite side (just not been cut-out).
It also looks like the cargo mats were hand-snipped on the rear edge, 2 straight cuts, to allow for the 2 heater log uprights.
So a repro mat could be made universal, with the purchaser to make the appropriate snips to match their bus' cargo door position.
For the record, the 4 small middle leg fixing holes on the BD mat look handcut too.
The part number seems to be found front middle, or rear middle. I'm thinking this variation is down to the manufacturer (Phoenix, Continental, or Fisco?) placement, as opposed to a 180 degree rotation of the mat.
Very little difference with a later cargo mat...which just has 4 larger (machine cut) holes for the middle seat fixing...and a different part number (221...)?
Feel free to verify/correct the above |
|
|
Back to top |
|
|
vintagevolks55 Samba Member
Joined: August 02, 2007 Posts: 27 Location: Fairview, Oregon
|
Posted: Mon Mar 20, 2017 1:29 pm Post subject: Re: Reproduction Cargo Floor Mats - interest? |
|
|
Any news on rear mats being made? |
|
Back to top |
|
|
Mujaty Samba Member
Joined: April 15, 2012 Posts: 118 Location: Malaysia
|
Posted: Mon Dec 26, 2016 8:53 am Post subject: Re: Reproduction Cargo Floor Mats - interest? |
|
|
HI,
Im in need of one RHD Front mat for my 1954 BD Kombi. Anyone has a report one made? Pls share
thx
JK |
|
Back to top |
|
|
WOB1 Samba Member
Joined: January 11, 2006 Posts: 176 Location: Austria
|
Posted: Sun Jun 05, 2016 1:59 pm Post subject: Re: Reproduction Cargo Floor Mats - interest? |
|
|
Is anybody working on a repro floor mat? |
|
Back to top |
|
|
zimblewinder Samba Member
Joined: January 22, 2004 Posts: 893 Location: Australia
|
Posted: Wed Nov 18, 2015 3:17 am Post subject: Re: Reproduction Cargo Floor Mats - interest? |
|
|
RHD 2 rear one front 58 thanks
dale _________________ 58Euro 23 343208 The Ultimate Zimblewinder Machine.
59 mango standard
Wanted- splash pan supports, og pressed bumper coach bolts, ivory blaupunkt knobs (early), armrest alloy strips, NOS door mechanism |
|
Back to top |
|
|
hugheseum Samba Member
Joined: February 11, 2004 Posts: 2690 Location: oregon
|
Posted: Tue Nov 17, 2015 9:53 am Post subject: Re: Reproduction Cargo Floor Mats - interest? |
|
|
ya i meant the rear mat,would be nice to confirm it seems like info worth knowing since the stupid things are so valuable now......if anyone can confirm im all eyes/ears _________________ Have a great day! |
|
Back to top |
|
|
EverettB Administrator
Joined: April 11, 2000 Posts: 69829 Location: Phoenix Metro
|
Posted: Tue Nov 17, 2015 9:41 am Post subject: Re: Reproduction Cargo Floor Mats - interest? |
|
|
andre b wrote: |
hugheseum wrote: |
is 52 the same as 53-55? anyone know for sure on this? my customer could use one |
i think 52 had the thin style and changed at 53,my 53 truck has the regular style vs my 52 had pieces of the early style. so orchard supply will work for a 52 front floor mat!lol,,, |
This is true for the front.
I think he might have been asking about the rear?
I think the '53 rear is generally the same as 54-55 but I cannot say with certainty.
I have seen the 54-55 style cargo mat in a '53 but I am not sure it was original or if it is 100% exactly the same. (Or if 100% the same even matters)
RockStock posted above the rear is the same for 52-55. _________________ How to Post Photos
Everett Barnes - [email protected] | My wanted ads
"Water is the only drink for a wise man" | "Communication prevents complaints"
Stop dead photo links! Post your photos to The Samba Gallery! |
|
Back to top |
|
|
andre b Samba Member
Joined: August 10, 2004 Posts: 806 Location: San Jose C.A.
|
Posted: Tue Nov 17, 2015 7:11 am Post subject: Re: Reproduction Cargo Floor Mats - interest? |
|
|
hugheseum wrote: |
is 52 the same as 53-55? anyone know for sure on this? my customer could use one |
i think 52 had the thin style and changed at 53,my 53 truck has the regular style vs my 52 had pieces of the early style. so orchard supply will work for a 52 front floor mat!lol,,, |
|
Back to top |
|
|
hugheseum Samba Member
Joined: February 11, 2004 Posts: 2690 Location: oregon
|
Posted: Mon Nov 16, 2015 6:25 pm Post subject: Re: Reproduction Cargo Floor Mats - interest? |
|
|
is 52 the same as 53-55? anyone know for sure on this? my customer could use one _________________ Have a great day! |
|
Back to top |
|
|
mr. warehouse Samba Member
Joined: February 27, 2001 Posts: 5001 Location: Nor Cal 707
|
Posted: Sat Nov 14, 2015 11:13 am Post subject: Re: Reproduction Cargo Floor Mats - interest? |
|
|
I would be interested in multiple front and rear mats. |
|
Back to top |
|
|
ian macdowall Samba Member
Joined: September 02, 2007 Posts: 114 Location: Devon, England
|
Posted: Sat Nov 14, 2015 9:18 am Post subject: Re: Reproduction Cargo Floor Mats - interest? |
|
|
matthew smith1 wrote: |
I'd take a front and rear for lhd 53 please |
Not sure anyone picked up the baton on this Matt, I too would add my name to the list of takers, I think there is the demand just need a capable and willing manufacturer _________________ '51 Beetle Deluxe
'52 Barndoor Deluxe |
|
Back to top |
|
|
matthew smith1 Samba Member
Joined: April 02, 2004 Posts: 64 Location: Cornwall UK
|
Posted: Fri Nov 13, 2015 3:35 am Post subject: Re: Reproduction Cargo Floor Mats - interest? |
|
|
I'd take a front and rear for lhd 53 please |
|
Back to top |
|
|
WOB1 Samba Member
Joined: January 11, 2006 Posts: 176 Location: Austria
|
Posted: Wed Nov 11, 2015 3:06 pm Post subject: Re: Reproduction Cargo Floor Mats - interest? |
|
|
So is anybody making them already? |
|
Back to top |
|
|
IN2VWS Samba Member
Joined: January 29, 2006 Posts: 2521 Location: Australia
|
Posted: Fri Jan 09, 2015 11:29 pm Post subject: |
|
|
I'd be in for a front and rear mat if you make RHD versions. _________________ ( ⫏ ⫐ )
(ọ\ ¡ /ọ)¹⁹⁵⁴ ¹⁹⁵¹
(⦷ ⥢ Ĭ ⥤ ⦷) 𝗞_𝗔_𝗥_𝗠_𝗔_𝗡_𝗡 𝓖𝓱𝓲𝓪¹⁹⁵⁶
⨴⨵--⊗--⨴⨵ 𝕊ℙ𝟚¹⁹⁷³
𝟵_𝟭_𝟰¹⁹⁷³ |
|
Back to top |
|
|
Erik G Samba Member
Joined: October 16, 2002 Posts: 13281 Location: Tejas!
|
|
Back to top |
|
|
nane_cox Samba Member
Joined: May 09, 2005 Posts: 115 Location: France-Switzerland
|
Posted: Fri Jan 09, 2015 2:14 am Post subject: |
|
|
Thanks for the reseaches and job your making. I would need 2 cargo mats. |
|
Back to top |
|
|
Gerson Samba Member
Joined: January 23, 2004 Posts: 1828 Location: Jupiter Fl
|
Posted: Thu Jan 08, 2015 7:31 am Post subject: |
|
|
Does anyone know of the whereabouts of Dave Fuentes?????I need to speak with him about this project....any help would be greatly appreciated.... _________________ that's not patina, that's fucking rust man!!!!
we (klassicfab) make the funky green panels........... |
|
Back to top |
|
|
djfordmanjack Samba Member
Joined: June 15, 2009 Posts: 2179 Location: Graz, Austria, Europe
|
|
Back to top |
|
|
Gerson Samba Member
Joined: January 23, 2004 Posts: 1828 Location: Jupiter Fl
|
Posted: Wed Jan 07, 2015 6:07 pm Post subject: |
|
|
thanks for the pics...they will help... _________________ that's not patina, that's fucking rust man!!!!
we (klassicfab) make the funky green panels........... |
|
Back to top |
|
|
|