NASkeet Samba Member
Joined: April 29, 2006 Posts: 2958 Location: South Benfleet, Essex, UK
|
Posted: Fri Apr 20, 2007 6:51 am Post subject: OEM VW vs pattern-part, exhaust heat exchangers & muffle |
|
|
If you have ever wondered why, genuine VW exhaust heat exchangers, provide more heat to the heater & demister system, than pattern-part, exhaust heat exhangers, this cut-away cross-section of some specimens, featured in the following magazine article, should make the reasons more apparent:
Jim Tyler, "The Heat is On", VW Motoring, November 1998, pages 38~41.
The most commonly available pattern-part exhaust heat exchangers, seem to be those of the Dansk Autopart A/S brand, manufactured by J. P. Group, in Denmark. Other known manufacturers are Bosal Ltd. and Arvin Replacement Products Ltd., which both have divisions in Great Britain and possibly elsewhere.
Their contact details are:
Dansk Autopart A/S (aka J. P. Group, Jopex Division), Hjulmagervej 5, DK-8800, Viborg, Denmark.
Tel. +45 8661 5000
Fax. +45 8661 2230
e-mail: [email protected]
******************************************************************************************************
Bosal (UK) Ltd., Walton Summit Road, Bamber Bridge, Preston, PR5 8AP, England.
Tel. +44 (0) 1772 334 851
Fax. +44 (0) 1772 312 750
******************************************************************************************************
Arvin Meritor Light-Vehicle Aftermarket (formerly known as Arvin Replacement Products Ltd., and earlier as T. I. Bainbridge), Squires Gate Industrial Estate, Squires Gate Lane, Blackpool, Lancashire, FY4 3RN, England.
http://arvin-rp.com
Tel. +44 (0) 1253 400 400
Fax. +44 (0) 1253 406 475
Product Marketing, direct Fax. +44 (0) 1253 361 028
Sales & Marketing, direct Fax. +44 (0) 1253 401 181
Technical, direct Fax. +44 (0) 1253 407 065 |
|
NASkeet Samba Member
Joined: April 29, 2006 Posts: 2958 Location: South Benfleet, Essex, UK
|
Posted: Sat Mar 26, 2016 9:29 am Post subject: Re: OEM VW vs pattern-part, exhaust heat exchangers & muffle |
|
|
I recently learned from one of my local VW Type 2 pals (less than 5 minutes walk down the road), that he has recently had severe problems with pattern-part exhaust heat exchangers, purchased from Just Kampers, for the 1976~78 VW 2000 Type 2 engine, of his Swedish specification, 1975 VW 1800 Type 2 army bus.
Several years ago, when I couldn't gain access to The Samba forums (restricted access at my public library), I posted details of various problems with pattern-part exhaust components, on the South African Air-Cooled VW forum, for which this is the link:
Home > Board index > Technical > Advice > Ill-fitting exhaust heat exchangers & silencers
http://www.aircooledvwsa.co.za/viewtopic.php?f=4&t=12783
This includes transcripts of my correspondence with the managing director of Dansk Autopart A/S (aka J. P. Group, Jopex Division) in Denmark, BBC Watchdog, The Consumers’ Association – Which? Magazine and the Director General of The Association of Trading Standards Offices, based in Hadleigh, Essex, England.
I have yet to find the current contact details for Arvin Meritor, but here are those for Bosal:
http://bosal.co.uk/AUTOMOTIVEPRODUCTS/Aftermarket/Exhaustsystems/tabid/1033/Default.aspx
Bosal Automotive & Industrial Components Ltd, Unit 330, Four Oaks Road, Walton Summit Centre, Bamber Bridge, Preston, PR5 8AP, England.
Tel: 01772 771000
Fax: 01772 771341
E-mail: [email protected] _________________ Regards.
Nigel A. Skeet
Independent tutor (semi-retired) of mathematics, physics, technology & engineering for secondary, tertiary, further & higher education.
Much modified, RHD 1973 VW "1600" Type 2 Westfalia Continental campervan, with the World's only decent, cross-over-arm, SWF pantograph rear-window wiper
Onetime member, plus former Technical Editor & Editor of Transporter Talk magazine
Volkswagen Type 2 Owners' Club (Great Britain)
http://www.vwt2oc.net |
|