Top frame rivets advertised here and on ebay

itiot · Posted: Fri Jun 01, 2007 10:40 pm Post subject:

Super feedback

I'll add the better drilling info to the instructions.

Actually we have also used a angle grinder to remove the rivets, but its kind of rough to the frame and if you dont paint it you loose the paint around the rivets because of the heat. But its fast Smile

thanks

Regards
Andy - Killer Products

markie61 · Posted: Tue Jun 05, 2007 6:41 pm Post subject:

Got mine today in the mail. Ordered Thursday; received on Tuesday. Not bad all the way from Denmark! I have ordered stuff in adjacent states that got here slower....

Anyway, the material arrived and appear to be good quality. I will not be able to install them for a couple of weeks, but will post once I do. I want to install the Thing Shop reinforcement kit at the same time and get it blasted and powdercoated.

Mark
_________________
Whut is that-there Thang!?
------------------------------
Chicks dig my Thing - so what if it's little and yellow...!?

markie61 · Posted: Fri Jun 08, 2007 10:36 am Post subject:

Wanted to add that I got my Volksbolts complete kit from Great Britain yesterday. Well-packaged in a food container, bubblepack, duct tape, and padded envelope. Looks very comprehensive. Ordered 5/31 and received 6/7. Nice.

First up: using the hex head SS door screws with my new Thing Shop SS hinge set. Cool

Mark
_________________
Whut is that-there Thang!?
------------------------------
Chicks dig my Thing - so what if it's little and yellow...!?

itiot · Posted: Wed Jun 13, 2007 1:11 am Post subject:

Hi there

Could we have some user pictures of the nuts installed?

I think someone promised that at some point Smile

Happy summer

BTW Keep an eye on our site - new stuff commimg soon.

Andy - Killer Products

kubelmann · Samba Member Joined: April 13, 2003 Posts: 3266

I agree with all the feedback about rivet removal being a bit more than just a fast and dirty 2 hr job.... I used all the tools listed and more. BUT!! Once the rivets are removed, the soft top becomes ready for very easy complete rebuild.

Mine is just back from the blaster and now ready for final finish and Killer reassembly.

itiot · Posted: Sat Jun 16, 2007 12:59 pm Post subject:

Hi all

Due to feedback and the struckle that some users have removing the old rivets I am gonna supply drill bit kits next week.

The kit will be an addon to the killer nuts and will consist of 2 drill bits, a center punch and instructions on how to remove the rivets.

hope your gonna like that!

Thanks to kubelmann for adressing this issue

Andy - KP

GPthing · Posted: Sat Jun 16, 2007 1:25 pm Post subject:

Andy,

Would you consider sending your past buyers the drill kit? I have not installed mine yet, too busy with installing pans at the moment.

Brian

kubelmann · Samba Member Joined: April 13, 2003 Posts: 3266

The drill bit kit is an additional kit that will be offered for sale. Anyone can buy one. Prior buyers or new folks. Andy just went to the trouble to provide the two bits and punch to make the job go more smoothly. I used good and not so good bits and the correct quality and size bit made all the difference to allow an easy rivet removal. Also knowing that the rounded head must be drilled out and not the flat headed side. Also the flat jawed vice grips to hold the rivets still as the rounded head is drilled out is important information.

GPthing · Posted: Sat Jun 16, 2007 8:25 pm Post subject:

Thanks K-mann.

brian

kubelmann · Samba Member Joined: April 13, 2003 Posts: 3266

Andy has just offered us a group buy deal on ten kits.

If we get ten of us together, we can get the kits for $50 each kit shipping included. That is actually a 15% discount over the regular price.

itiot · Posted: Wed Sep 05, 2007 6:42 am Post subject:

The group buy offer is still valid - let me know

Andy

itiot · Posted: Wed Sep 05, 2007 6:42 am Post subject:

The drill bit kit is on its way, but it is slow right now.

Andy

itiot · Posted: Sat Sep 22, 2007 7:31 am Post subject:

For anyone interested in the offer (free shipping until christmas)

Please paypal us the $50 to paypal(ad)killer-products.dk

and we will ship asap.

thanks a lot for supporting us.

andy - Killer product

itiot · Posted: Fri Nov 23, 2007 1:24 pm Post subject:

Hi all

Got a new lot of nuts for you.

Get them before christmas

Regards

Andy - Killer Products

itiot · Posted: Tue Jan 01, 2008 5:36 am Post subject:

Hi there

The cristmas offer is gone and the price is now $60 including worldwide shipping

Happy newyear all

Andy - Killer Products

itiot · Posted: Fri Apr 11, 2008 9:32 am Post subject:

due to the low dollar the price on the kit is now $ 55

see yaa

Andy Killer products

kubelmann · Samba Member Joined: April 13, 2003 Posts: 3266

Agreed!! I spoke with Andy about this and he now has the correct drill bit available. The first rivet is tough to do from there it gets better. But the finished product is awesome. These will soon be available on my web site directly from Andy.

itiot · Posted: Tue Jun 03, 2008 1:37 pm Post subject:

come on folks

please support our future development by buying our nuts Smile

please visit: http://killer-products.dk

klokard · Samba Member Joined: February 10, 2005 Posts: 158

Used the kit and found it to be just so so.

itiot · Posted: Tue Jun 03, 2008 10:06 pm Post subject:

klokard: you already reviewed on page 1 and we changed the instructions

did you have trouble after the install?


Hello! Log in or Register \| Help \| Donate \| Buy Shirts	See all banner ads \| Advertise on TheSamba.com

Top frame rivets advertised here and on ebay
Page: Previous 1, 2, 3, 4, 5, 6 Next

	Forum Index -> Thing/Type 181	All times are Mountain Standard Time/Pacific Daylight Savings Time Page: Previous 1, 2, 3, 4, 5, 6 Next
Page 2 of 6