Author |
Message |
Bruce MacDonald Samba Member
Joined: March 03, 2004 Posts: 193 Location: Markham, Ontario, Canada
|
Posted: Wed Dec 30, 2009 6:48 pm Post subject: |
|
|
Here's another one from Canada:
You are welcome to post it if you want. I've owned VW's since I was in university in 1968 and always really liked the Sprint Stars, but could not afford them as a poor student. One of the first things I ordered when I found my 54 was a set of repros. 40 years later and I finally got a set of Sprint Stars. Even the repros are very rare in Ontario. _________________ Stop worrying about how much your car will be worth when you are dead and build it to make you happy! |
|
Back to top |
|
|
leadedge Samba Member
Joined: March 13, 2008 Posts: 7 Location: Kingston, ON
|
Posted: Thu Dec 31, 2009 8:42 am Post subject: |
|
|
Hi Guys:
First my story: Picked up a beater '71 Super about 8yrs ago for $400, with thoughts of a restore. In passing as I loaded her up on the carrier the guy says "someone told me the rims on her might be worth something". Fast forward about 8yrs and due to kids etc. said beetle has sat in storage. In the meantime I have a lovely '63 that I bomb around town in. This winter I have my '63 in storage and '71 is being torn apart in my garage. After a "free" media blast from a friend, the rims turn out to be 4 bolt Sprint Stars, with stamps saying Lemmertz and Empi and Made in Western Germany stamps plus some numbers. They are all now blasted and primed and I am wondering what to do. They are, shockingly, all in almost perfect condition with very minimal pitting mainly on backsides.
Questions: This may be stupid but for the painting of these things are you guys just using rattle cans?
Any idea roughly of a value for all for with just primer? They are all 5.5x15 and the stamp numbers all match.
I got a quote for powder coating. They said they would have to blast off the primer, then do the black, then the silver and clear, price would be $500 for the set. Does that seem pretty good?
Thanks for any advice. I'll try and get some pics of the rims posted if that helps. |
|
Back to top |
|
|
restojohnny Samba Member
Joined: February 13, 2004 Posts: 2763 Location: SPLITSVILLE , SON !!!!
|
Posted: Thu Dec 31, 2009 9:10 am Post subject: |
|
|
Average price on the wheels goes for about $100.00 a peice in nice condition. The chrome ones go for alittle more about $125.00 a peice. I've been selling them lately though for $75.00 including the shipping and I just sold 2 of them after a long wait for a buyer I still have more to sell at $75.00 a peice but not much interest for 4 lug sprints at the moment (atleast now). _________________ ** HELL YEAH I'LL SELL IT TO YOU**
O.G. POMONA VULTURE
$$ SWAPMEET MAFIA $$
53 LHD, LH cargo door standard kombi
54 Pre-A Porsche
55 oval ribbed door non-semiphore
56 semiphore ragtop
63 notchback (work in progress)
67 OG black paint beetle sedan empi accessorized
67 original Empi GTV beetle convertible !!
67 euro squareback
67 deluxe walkthru (work in progress)
67 convertible ghia (work in progress)
"STAY OUTTA MY BACKYARD !!! " |
|
Back to top |
|
|
leadedge Samba Member
Joined: March 13, 2008 Posts: 7 Location: Kingston, ON
|
Posted: Thu Dec 31, 2009 10:14 am Post subject: |
|
|
Yikes! I thought they were worth more than that.
Oh well, I think I might try and paint them myself and if a nice little Ghia ever shows up on my door I'll use them on that . _________________ 1963 Sedan |
|
Back to top |
|
|
Mike Fisher Samba Member
Joined: January 30, 2006 Posts: 17962 Location: Eugene, OR
|
Posted: Thu Dec 31, 2009 10:51 am Post subject: |
|
|
The 5.5" are too big/wide/offset for lowered VW's! _________________ https://imgur.com/user/FisherSquareback/posts
69 FI/AT square Daily Driver
66 sunroof,67,70,71,71,71AT,72,72AT,73 Parts
two 57 oval ragtops sold
'68 Karmann Ghia sold
Society is like stew. If you don't keep it stirred up you end up with a lot of scum on the top! - Russ_Wolfe/Edward Abbey |
|
Back to top |
|
|
restojohnny Samba Member
Joined: February 13, 2004 Posts: 2763 Location: SPLITSVILLE , SON !!!!
|
Posted: Thu Dec 31, 2009 1:01 pm Post subject: |
|
|
Mike Fisher wrote: |
The 5.5" are too big/wide/offset for lowered VW's! |
I don't think so they have the exact same offset as the wide 5's that everyone rolls on unless they re-rimmed them and changed it to whatever application needed for there ride _________________ ** HELL YEAH I'LL SELL IT TO YOU**
O.G. POMONA VULTURE
$$ SWAPMEET MAFIA $$
53 LHD, LH cargo door standard kombi
54 Pre-A Porsche
55 oval ribbed door non-semiphore
56 semiphore ragtop
63 notchback (work in progress)
67 OG black paint beetle sedan empi accessorized
67 original Empi GTV beetle convertible !!
67 euro squareback
67 deluxe walkthru (work in progress)
67 convertible ghia (work in progress)
"STAY OUTTA MY BACKYARD !!! " |
|
Back to top |
|
|
Mike Fisher Samba Member
Joined: January 30, 2006 Posts: 17962 Location: Eugene, OR
|
Posted: Thu Dec 31, 2009 1:05 pm Post subject: |
|
|
LOWERED? _________________ https://imgur.com/user/FisherSquareback/posts
69 FI/AT square Daily Driver
66 sunroof,67,70,71,71,71AT,72,72AT,73 Parts
two 57 oval ragtops sold
'68 Karmann Ghia sold
Society is like stew. If you don't keep it stirred up you end up with a lot of scum on the top! - Russ_Wolfe/Edward Abbey |
|
Back to top |
|
|
restojohnny Samba Member
Joined: February 13, 2004 Posts: 2763 Location: SPLITSVILLE , SON !!!!
|
Posted: Thu Dec 31, 2009 1:14 pm Post subject: |
|
|
Yes LOWERED here's a pic of my friends ride slammed with 5.5's out back
_________________ ** HELL YEAH I'LL SELL IT TO YOU**
O.G. POMONA VULTURE
$$ SWAPMEET MAFIA $$
53 LHD, LH cargo door standard kombi
54 Pre-A Porsche
55 oval ribbed door non-semiphore
56 semiphore ragtop
63 notchback (work in progress)
67 OG black paint beetle sedan empi accessorized
67 original Empi GTV beetle convertible !!
67 euro squareback
67 deluxe walkthru (work in progress)
67 convertible ghia (work in progress)
"STAY OUTTA MY BACKYARD !!! " |
|
Back to top |
|
|
Mike Fisher Samba Member
Joined: January 30, 2006 Posts: 17962 Location: Eugene, OR
|
Posted: Thu Dec 31, 2009 1:40 pm Post subject: |
|
|
That bug must have 6" axles! _________________ https://imgur.com/user/FisherSquareback/posts
69 FI/AT square Daily Driver
66 sunroof,67,70,71,71,71AT,72,72AT,73 Parts
two 57 oval ragtops sold
'68 Karmann Ghia sold
Society is like stew. If you don't keep it stirred up you end up with a lot of scum on the top! - Russ_Wolfe/Edward Abbey |
|
Back to top |
|
|
vaughn bros. Samba Member
Joined: October 13, 2003 Posts: 2395 Location: Hickory, NC
|
Posted: Thu Dec 31, 2009 3:11 pm Post subject: |
|
|
This when I ran a deep set of 4 lug sprints on 195/50 front and 195/60 rear and widened fenders.
|
|
Back to top |
|
|
vwclap Samba Member
Joined: April 21, 2004 Posts: 519 Location: Qc, Canada
|
Posted: Sun Jan 03, 2010 5:27 pm Post subject: |
|
|
leadedge wrote: |
Hi Guys:
First my story: Picked up a beater '71 Super about 8yrs ago for $400, with thoughts of a restore. In passing as I loaded her up on the carrier the guy says "someone told me the rims on her might be worth something". Fast forward about 8yrs and due to kids etc. said beetle has sat in storage. In the meantime I have a lovely '63 that I bomb around town in. This winter I have my '63 in storage and '71 is being torn apart in my garage. After a "free" media blast from a friend, the rims turn out to be 4 bolt Sprint Stars, with stamps saying Lemmertz and Empi and Made in Western Germany stamps plus some numbers. They are all now blasted and primed and I am wondering what to do. They are, shockingly, all in almost perfect condition with very minimal pitting mainly on backsides.
Questions: This may be stupid but for the painting of these things are you guys just using rattle cans?
Any idea roughly of a value for all for with just primer? They are all 5.5x15 and the stamp numbers all match.
I got a quote for powder coating. They said they would have to blast off the primer, then do the black, then the silver and clear, price would be $500 for the set. Does that seem pretty good?
Thanks for any advice. I'll try and get some pics of the rims posted if that helps. |
I used a VW silver color for my wheel LA7W Reflex silver at my paint shop for $20/can and used hardware black for the center and I am satisfied of the result.
I paid my 5.5 $300 for a set of 4 shipped with the VW center cap included. I paid more ($200) for my 4.5 for 2 wheels without the cap to complete the combination that I wanted for my ghia from a friend.
Here 2 pics of the wheels. Note that now I have chrome nuts and studs that I found on the samba at $30 shipped.
_________________ Claude
cox 1956, 1962 et 1975
Split panel 1963
Samba 21 fenetres 1966
Ghia 1968
Sport Ghia 73
West 1970
Jetta 1992
Jetta TDI 2015
West Multivan 2002 |
|
Back to top |
|
|
vwclap Samba Member
Joined: April 21, 2004 Posts: 519 Location: Qc, Canada
|
Posted: Thu Feb 11, 2010 7:13 pm Post subject: |
|
|
I want to see more sprintstar!
here is mine.
_________________ Claude
cox 1956, 1962 et 1975
Split panel 1963
Samba 21 fenetres 1966
Ghia 1968
Sport Ghia 73
West 1970
Jetta 1992
Jetta TDI 2015
West Multivan 2002 |
|
Back to top |
|
|
sunnybug84 Samba Member
Joined: July 12, 2008 Posts: 135 Location: Meinkot/Germany
|
Posted: Sat Feb 13, 2010 3:02 pm Post subject: |
|
|
well, here is my '68. it has 5,5's all arround an offset of 6 in the back and 26 in front. im running 205/60 15 in the back and 155/80 15 upfront.
sorry for that licensplate in the back, i have to change that, i know |
|
Back to top |
|
|
Neil Davies Samba Member
Joined: July 31, 2005 Posts: 393 Location: Kidderminster, West Midlands, UK
|
Posted: Sun Feb 14, 2010 2:34 pm Post subject: |
|
|
Here's an old pic of a '70 I owned several years ago, with 4.5 and 5.5 sprints.
I've got a set of chrome 4.5's now, but not sure what to put them onto! _________________ '67/'68 Cal Look Beetle, 2007cc, 48IDFs, 14.4 @ 93mph, Oct 2017.
'68/'70 Karmann Beetle, wife's project, progressing slowly.
'80 Devon Moonraker, wife's ratty but cool toy.
'86 Scirocco special project - still measuring up... |
|
Back to top |
|
|
maggiolino84 Samba Member
Joined: May 27, 2007 Posts: 31
|
Posted: Mon Apr 11, 2011 5:00 am Post subject: |
|
|
Hi guys, I'm here again. I'm the owner of the webiste about Sprintstars!!!!
http://sprintstar.blogspot.com/
I just wanted to tell you that I'm really sorry if I haven't updated the website for almost 2 years, but I sold my beetle and I partially lost interest in the aircooled VW world.
Anyway, now I'm here again. I decided not only to start updating the blog again, but I have also in mind a lot of great ideas to improve the blog.
I want it to become the biggest resource on the web for sprintstars wheels, with technical information, with the pics of your cars, with your questions and answers and maybe with a Sprintstar community too!
I've just begun changing the appearance of the blog, so you will probably notice a bit of mess in these days, but there are already new posts and new beautiful pics so please come and visit us!!! Your visits are my greatest reward.
Of course the website is totally free. If you want to help me making the blog bigger and better you can just click on the ads on the page. It's free and fast for you but of great importance for the blog growth
Some of the most important new features up to now (with MUCH more still to come):
- New home page appearance
- New facebook page (please come and visit it, leaving a comment!!!!)
http://www.facebook.com/home.php?sk=lf#!/pages/Int...1101131291
- New email address: [email protected]
You can send the pics you want to publish to this mail address, or keep attaching them to this post
What do you think about it? Do you like it? Will you come and visit us?
Well I think I have to say again I'm sorry for the 2 year silence. I kept all your emails, and day by day I'll post the pics I received in these 2 years on the blog, included the ones you attached to this post.
So, once again, come and visit us!!!! http://sprintstar.blogspot.com/ _________________ http://www.sprintstar.blogspot.com |
|
Back to top |
|
|
Clembus Samba Member
Joined: August 14, 2006 Posts: 105 Location: Gloucester, UK.
|
Posted: Tue Apr 12, 2011 4:17 am Post subject: |
|
|
Ive just done a set of 4 lug Sprints for my Ghia. 4.5's all round and am pretty pleased with then. I had a pair of 5.5's and they were no good for the rear when lowered. The 4.5's up front required a little clearancing on the casting on the front calipers.
There are a number of pics on my blog .... apologies for not posting them, but I have access restrictions at work!
www.clemsblog.tumblr.com
I have wide 5's on my Westfalia ... these are the BBT repros. _________________ http://clemsblog.tumblr.com/ |
|
Back to top |
|
|
maggiolino84 Samba Member
Joined: May 27, 2007 Posts: 31
|
Posted: Tue Apr 12, 2011 5:08 am Post subject: |
|
|
Thanks very much even for the post on your blog!!! If you want to send me some pics in the following days I can make a post with your Sprintstars !!!! _________________ http://www.sprintstar.blogspot.com |
|
Back to top |
|
|
maggiolino84 Samba Member
Joined: May 27, 2007 Posts: 31
|
Posted: Wed Apr 13, 2011 4:45 am Post subject: |
|
|
Clembus wrote: |
Ive just done a set of 4 lug Sprints for my Ghia. 4.5's all round and am pretty pleased with then. I had a pair of 5.5's and they were no good for the rear when lowered. The 4.5's up front required a little clearancing on the casting on the front calipers.
There are a number of pics on my blog .... apologies for not posting them, but I have access restrictions at work!
www.clemsblog.tumblr.com
I have wide 5's on my Westfalia ... these are the BBT repros. |
Hi!!! I just posted on the blog the pics of the Ghia!!! But I could not find a pic of the whole car with the Sprints... can you send me one???
Tomorrow I will post the pics of your bus with wide 5 Sprints
Thanks very very much!!! _________________ http://www.sprintstar.blogspot.com |
|
Back to top |
|
|
maggiolino84 Samba Member
Joined: May 27, 2007 Posts: 31
|
Posted: Sun May 06, 2012 12:05 am Post subject: |
|
|
New pics on my blog, take a look at them, and keep sending me pics of your sprintstar cars!!! keep the Sprintstar blog alive!!!!! _________________ http://www.sprintstar.blogspot.com |
|
Back to top |
|
|
EVfun Samba Member
Joined: April 01, 2012 Posts: 5446 Location: Seattle
|
Posted: Sat May 12, 2012 11:17 pm Post subject: |
|
|
I was thinking about a new set for my buggy. Since the steel ones use stock type lug bolts how about putting the bolt caps seen on the late Bug sport wheels on them? The lug bolts are in a black area and I think the head size is the same on early and late lug bolts (but the threads are larger on the late ones.) |
|
Back to top |
|
|
|