Author |
Message |
16CVs Samba Member
Joined: February 22, 2004 Posts: 4026 Location: Redwood City, California
|
Posted: Sun Jul 30, 2023 7:37 pm Post subject: Vanagon Subaru 2.2 AC compressor replacement |
|
|
Has anyone updated their AC compressor to a newer type that is available as a new item. I understand that the fitting would be different, but they like they all mount with the same bolt pattern.
Mine is a Harrison and it died, turns out it had no oil In it. I’ve bought a Reman’d unit and it’s as dead as the one I took.
I tried Subaru and it is NLA. I am scared to try another Re Man. I might just put a used one back in. This is in conjunction with an In Dash air install.
I’ve tried to join a Subaru forum but can not get in. If you’ve been down this road now is the time to speak out.
Having new hoses made or introducing new hose ends are OK.
Stacy _________________ 1987 Syncro Westfalia Triple knob (bastard)
1989 Syncro Tristar Triple knob "Swedish"
2013 Jetta Hybrid a true "Zwitter"
Samba member # 14980
Call anytime number 650 722 4914 .
Keep Your van running and upkept tastefully for the love of the hobby.
Don't let your van end up in an "abortions" thread. |
|
Back to top |
|
|
wesitarz Samba Member
Joined: August 20, 2012 Posts: 1491 Location: Victoria,B.C.Canada
|
Posted: Sun Jul 30, 2023 10:38 pm Post subject: Re: Vanagon Subaru 2.2 AC compressor replacement |
|
|
From subaruvanagon Yahoo group Jul.8. 3.3 replacement compressor
I used a compressor from an 07 2.5, new from Subaru, and the corresponding mount bought used off ebay. The mount needs heavy mods, as the T belt on the 3.3 is way wider than the 2.5. Otherwise it would have been almost bolt-in. The issue is that the compressor has to be mounted and extended out from the block to line up with the AC pully on the crank. I had to cut the tabs off the block mounts and reposition them until the pulleys lined up, then drilled and tapped some small bolts to hold the tabs in place, then took the mount to a welder. (I don't weld.). I also had to make an adapter using a straight piece of steel on the other side to adapt to the outer tab. Also obtained some new compressor hoses which I just used for the fittings. Then used aluminum soldering to connect with the hoses going forward (I was amazed that the alum soldering worked and has held for 5 years now.) I also converted to the behind-the-dash AC conversion and made my own hoses. For a belt, I used the late model stretchy, idlerless belt, same as the 2.5. works flawlessly. It was quite a project but well worth it and the conversion has worked flawlessly. |
|
Back to top |
|
|
16CVs Samba Member
Joined: February 22, 2004 Posts: 4026 Location: Redwood City, California
|
Posted: Thu Sep 21, 2023 11:46 pm Post subject: Re: Vanagon Subaru 2.2 AC compressor replacement |
|
|
Would you have the part number form the pump?
Stacy _________________ 1987 Syncro Westfalia Triple knob (bastard)
1989 Syncro Tristar Triple knob "Swedish"
2013 Jetta Hybrid a true "Zwitter"
Samba member # 14980
Call anytime number 650 722 4914 .
Keep Your van running and upkept tastefully for the love of the hobby.
Don't let your van end up in an "abortions" thread. |
|
Back to top |
|
|
vanis13 Samba Member
Joined: August 15, 2010 Posts: 3100 Location: ABQ NM USA.... Except when not
|
Posted: Fri Sep 22, 2023 6:41 am Post subject: Re: Vanagon Subaru 2.2 AC compressor replacement |
|
|
Since your asked for "OEM" ish...
Search any of the Subarus that have a 2.2 or 2.5
A search at your FLAPS or on 4s.com will yield results.
If you determine what fitting ends you have you may be able to use the hoses you have otherwise you'll have to change them, possibly finding the fittings at a junk yard. Possibly 4s has a compressor for your or similar 2.2 and you'll be able to keep your fittings. Luckily 4s has pictures of their compressors to compare to what you have.
As an example, searching a 1999 Subaru Forester on 4s returns a 68653 which can be readily searched and cross referenced to other manufacturers
$229 at RockAuto
https://www.rockauto.com/en/moreinfo.php?pk=3620814&cc=0&pt=6628
This compressor is compatible with
SUBARU FORESTER 1998-2000
SUBARU IMPREZA 1993-2001
.... if you don't find a direct match and want a compressor solution where you could use standard AC fittings without having to cobble together old Subaru hose ends, send me an email for some ideas [email protected] _________________ 83.5 Westy with Subaru 2.5, 4 spd manual, center seat, COLD A/C on 134a!, Winter camp heated with an Espar B4 gasoline furnace
www.SuperVanagon.com - some stuff I make |
|
Back to top |
|
|
R0ckyMtnCamper Samba Member
Joined: May 30, 2022 Posts: 97 Location: CO
|
Posted: Fri Sep 22, 2023 1:47 pm Post subject: Re: Vanagon Subaru 2.2 AC compressor replacement |
|
|
Heads up to anyone looking for an aftermarket replacement compressor for their EJ. I realized this info after a ton of head banging and running around to grab compressors from every FLAPS within a 50 mile radius…
Subaru generally used two different types of mounting brackets for compressors on EJ motors. One has a slightly different design that allows for a larger compressor housing.
The bracket that was originally on my EJ251, pictured just above, has a piece towards the rear of the compressor that is not compatible with any of the Four Seasons aftermarket compressors I was able to find in stores despite them claiming they were compatible. Four Seasons must have eventually realized this because their new units with the same part number now come with a new bracket that is identical to the alternative one that came on some EJ motors. Unfortunately, many of the units sitting on the shelves at your FLAPS were stocked before Four Seasons realized this and do not come with the bracket.
Long story short, check your existing bracket to make sure it is the one that allows for wider compressor compatibility before you buy or make sure your new compressor comes with the bracket. |
|
Back to top |
|
|
|