VwDubber
Samba Member
Joined: February 20, 2012
Posts: 144
|
 Posted: Tue Aug 06, 2013 6:08 am Post subject: WBX Front Oil Sender |
 |
|
Does anyone know what the front Oil sender is on a 2.1 WBX engine. The one left of the Front Crank Pulley
Mine is leaking pretty badly and I'd like to replace it but not sure what one to order, is it the Low pressure sender, or the High pressure sender?
I also can't identify the color, but thought that different color senders were different settings? What colors what, think they are either Blue, or Gray correct. But what color is what?
Also it looks like a tuff one to access, is it accessible if I remove the belts?
Thanks for any Helpful responses. |
|
T3 Pilot
Samba Member
Joined: January 10, 2011
Posts: 1509
Location: Deep South of the Great White North
|
| Posted: Tue Aug 06, 2013 6:12 am Post subject: |
|
|
It's the high pressure switch. Ref. Bentley 17.7
Last time I removed that switch I removed the alt/H2O belt and the H2O pump pulley. I forget what colour it is, but the switch range is stamped onto the metal base, should be in the 0.9 bar range.
Good luck in there.
_________________
1988 Vanagon
The most important part in every vehicle is the nut behind the wheel...... |
|
