| Author |
Message |
Lohe
Samba Member
Joined: June 26, 2007
Posts: 662
Location: Chandler, Az
|
 Posted: Wed Aug 22, 2007 6:13 am Post subject: Broken doors |
 |
|
So my 60 panel's doors can open find from the inside [I sprayed the mech with wd-40] but the outside handles arent connected to anything it seems, they just flop around. Is there a good parts diagram for the door opening mech, is this a common problem, is there a pin or something that is probably broken?
I posted this under another person's door problem thread, but got no response so I'm littering the board with another thread, sorry! |
|
| Back to top |
|
 |
mooose
Samba Member
Joined: January 31, 2005
Posts: 85
Location: wis cold land
|
| Posted: Wed Aug 22, 2007 6:24 am Post subject: |
|
|
| it seems like your outside handles are broke inside the door , i would take them out and check them ,when i had a prob like yours i took mine out and seen where they are broke , its nothing major but u might need new handles ,theres a latch on the handle that catches the latch in door that opens it , |
|
| Back to top |
|
|
|
