Do you have to pull the Motor to change Motor Mounts on 2.1?

pete000

I was thinking about changing my mounts because my bus has 175K on it now and they are fairly inexpensive.

Just wondering if it is possible getting to the upper nuts with out dropping the engine down?
_________________
1990 Vanagon RS 2.1
1967 Deluxe 21 window
--------------------
Koni Shocks
H & R Red Springs
Addco Sway Bars Front-Rear
18 X 7.5 and 18 X 8 OEM Porsche Wheels
Recaro Power-Heated seats

tencentlife · Posted: Thu Dec 25, 2008 2:45 pm Post subject:

No problem, just support the engine and remove the support beam. You can get to the upper nuts pretty easily to change out the mount blocks, or you can remove the aluminum carrier bracket.
_________________
Shop for unique Vanagon accessories at the Vanistan shop:
https://intrepidoverland.com/vanistan/

Please don't PM here, I will not reply.

Experience is kryptonite to doctrine.


Hello! Log in or Register \| Help \| Donate \| Buy Shirts	See all banner ads \| Advertise on TheSamba.com

	Forum Index -> Vanagon	All times are Mountain Standard Time/Pacific Daylight Savings Time
Page 1 of 1