has anyone done the bostig conversion?

tschroeder0 · Posted: Mon Mar 02, 2009 12:15 pm Post subject:

Ok it took me a while to figure out you guys were simply comparing opening up the engine compartment with opening up the license plate access....you're joking right?
After all the work and time these things require to get them truly roadworthy. I'm guessing even if I had mine fully loaded with camp gear it may take 10 min to unload check oil and reload???

I have been helping a guy here in town do a conversion(Bostig) for the last week, It's a very well thought out kit and it's changed my mind on the whole "what engine should I use" question.

Considering all I've done to keep mine going, this seems like a very trivial matter for people to be getting pissy about? Hell, I get undeer the van and check my exhaust bolts on a long trip.. Laughing

Todd.

mccabe · Posted: Mon Mar 02, 2009 3:43 pm Post subject:

240Gordy · Posted: Mon Mar 02, 2009 4:21 pm Post subject:

gee, I don't think I am anal retentive, or pissy. I thought I was being quite reasonable, maybe not in the idea that we need easy dipstick access, but in my tone of my argument and my remarks. Nowhere did I call people names or smear their character.

I didn't accuse Jim of hubris, that by definition would mean they have already failed, and by any measure they seem to be a success. It is a beautiful product. The confidence is justified for both the conversion kit and the zetec engine. It is the replies to comments in this thread and elsewhere that seem hubristic. That is my impression. I have had management training, I supervise people, I interact with clients, I get along on other internet venues.

Seems I am attacking some kind of cult. Lighten up guys, I am sure Bostig can handle a little critiquing, and can mull over suggestions and prioritise what they need to do to develop their product. I read with an open mind Jim's rebuttal and had a rebuttal of my own. Take a step back and read the thread and think about what a non-vanagon gearhead would get out of this.
_________________
Tencentlife said,
"So, now that you know what you're doing, go to town."
2010 GOLF TRENDLINE 2.5
1985 GL now with more! a 2.1L
H&R SPORT(RED) Springs FRONT , SLAM SPECIALTIES RE6 AIRBAGS REAR

boardshorts · Posted: Mon Mar 02, 2009 4:24 pm Post subject:

Speaking of Ford and dipsticks-I remember when they did away with the tranny dipstick.No one really seemed to care.Now if I'm not mistaken,most all newer cars have no tranny dipstick.Ya gotta check it on a lift with the engine running,etc.You learn to adapt.

tschroeder0 · Posted: Tue Mar 03, 2009 1:12 am Post subject:

Hey Gordy,

I wasn't referring to you, not really sure why you thought i was? It seemed to me after reading the latest part of the thread that people were getting angry over this issue and all i was trying to say was I didn't really get it, no harm meant to you. Todd.

ftp2leta · Posted: Tue Mar 03, 2009 7:24 am Post subject:

come on kids.... Bostig, Subi or even the great diesel conversion that Karl does are all good option for our van!

I don't have the extension to "easy" access the dip stick behind the plate, who frigging care!!! Like someone as stated. It's a very small price to pay! So yea, once in a wile i remove all the stuff to have a general look, it is simply normal to do so on very long trip.

Even if in the case of Subaru, you can simply put you hand into the license plate hole and reach the Dip Stick.

I agree with Jim that money should be invested elsewhere! Sorry my good friend Karl Smile

Anyone who do a drive test in a nice converted van will forget VERY fast where that thing is! You should have seen the face of my passenger in FL when we took a quick trip to St-Pete beach, i floored the gas pedal in second gear at 6500 rpm and the front of the van rise up a few inches Smile

All 3 passenger simply stop talking.
I don't think they where thinking about any dip stick location!

Ben
_________________
Working with rust, grease, dirt and dust is a sad truth.
------------------------------------------------------
FI part for sale: http://www.benplace.com/parts_sale1.htm
My site: http://www.benplace.com/vw2.htm
Subi conversion: http://www.benplace.com/vanaru_eng.htm
Youtube http://www.youtube.com/user/ftp2leta

insyncro · Posted: Tue Mar 03, 2009 8:08 am Post subject:

After completing many conversions I have to chime in and say........

If you want a dip stick in the factory location, put it in.
Remote oil cooler, remote oil filter, scavenger screen, Aeroquip lines, -AN fittings, rear disc brakes, 17 inch wheels.....you get the picture.

Anything is possible when converting.

Jim has impressed me with his understanding of what the conversion market has asked for and they are providing a great option for our vans.
What I am reading from this thread is that most Bostig converters are not looking for a dip stick in the factory location, no biggie.

Jon_slider · Posted: Tue Mar 03, 2009 8:36 am Post subject:

I have two subaru 2.2 powered vehicles, one is a Syncro Westy, the other is a Subaru Impreza. Both engines have about 60k miles, and they both use about one quart in 5000 miles.

I am not aware of any oil leaks on any of my engines. Im kind of fussy about that, and had a valve cover leak on one of them that was resolved with a new gasket.

I previously had a 2.2 in the Impreza with 160k miles, and it would consume a quart in 3000 miles.

So I think you are right that higher mileage, uses more oil. As far as when it uses oil, I dont know, I only know the interval.

In fact, I use being down a quart, as an indication its time to do an oil change <g>

thanks for the brainstorming, and the awesome commitment to quality that the Bostig kit offers.

ftp2leta · Posted: Tue Mar 03, 2009 9:26 am Post subject:

insyncro · Posted: Tue Mar 03, 2009 9:34 am Post subject:

Ben,
Sounds like you may be headed for a STI turbo or SVX on the Subie side, if power is what you need.

I too would like to see the supercharged or turbo charged Zetec next to one of my Syncro SVX vans.

Tuned I am at 276hp to the wheels and have not yet needed more.
This van is a 7 pass. Syncro and is light compared to a Westy Syncro.
I primarily tow with it.

I just picked up a 91 Carat Wolfsburg in Tornado Red with a 4 speed.
I have wanted to convert this van for a long time.
I have a 3.3 sitting here ready to go, but am still looking at other options.
WRX STI would be nice or a worked Zetec.

dylan

Williamtaylor33 · Posted: Thu Mar 05, 2009 3:34 pm Post subject:

I checked my mileage on a recent trip. With my GPS counting the mileage.
I went 201 miles on 9.05 gallons.

Thats just over 22mpg. My best reading so far.

This is driving a steady 60 mph at 900 feet elevation.
_________________
89 Bostig powered syncro westy

vindeta · Posted: Mon Aug 17, 2009 3:14 pm Post subject:

alright i know im resurrecting an old thread...sorry

anyway i just had a couple questions.

im 17 and building a baja bug and ive got a friend that will give me a complete 2000 ford escort ZX2 it has the 2.0 liter 4cyl zetec engine with DOHC (wrecked)

so i have the engine and all the wiring harnesses and everything else to hook it up.
its a good running car he just drove it and then pulled the tranny for another car.

how much would it cost me to do the conversion? im talking the bottom price that i could get away with.

can i just use all the stock parts so that i would only have to buy the adapter plate itself?

i checked the bostig site but theres absolutely no way that i could dish out like $2000 (or whatever it was)

thanks alot guys
_________________
75 baja in progress!
http://www.azbaja.com/ForumsPro/viewtopic/t=5767.html
build thread^^

James 93SLC · Posted: Mon Aug 17, 2009 4:58 pm Post subject:

vindeta · Posted: Mon Aug 17, 2009 5:51 pm Post subject:

yea Kennedy does make an adapter for it.

i really dont know a whole lot about doing engine swaps, so if someone could kinda explain the overall procedure or if theres a thread somewhere with alot of good info on it that would be great to.
so what all do i need?

ill have the engine, all the wiring harness, radiator, ecu (computer), everything else to make the car go, it was a running, driving car before.
(he only wants $150 for it)

so in theory i just need to "unplug" it from the escort and "plug" it into my car??

is that correct?? is it just a matter of wiring it in?
(besides hooking up the radiator)

thanks alot guys i really dont know much about this so any effort you put to explain it is appreciated.
_________________
75 baja in progress!
http://www.azbaja.com/ForumsPro/viewtopic/t=5767.html
build thread^^

HeftySmurf · Posted: Mon Aug 17, 2009 6:54 pm Post subject:

Dude, you need to rethink what you are doing......
Bostig makes a Vanagon conversion, not a Baja all that will need to be customized......
So you will need to make numerous custom parts to do what you speak of
which will cost thousands of dollars....... Brick wall

Your budget is 2k and the bostig set up into a vangon is around 5k ] d'oh!

_________________
-Lorenzo
90 GL w/ Bostig

hiram6 · Posted: Tue Aug 18, 2009 10:58 am Post subject:

I'm with smurf on this one.

Baja bug = air cooled, right? Vanagon/Zetec = water-cooled. You really up to the engineering involved here?

I know I wouldn't be.
_________________
1985 Westy, 1.9L automatic (Daisy)
1996 Mazda Miata
1998 Jeep Grand Cherokee 5.9 Limited

You can't lie around on the beach and drink rum all day.................unless you start first thing in the morning.

madspaniard · Posted: Tue Aug 18, 2009 11:13 am Post subject:

Changing subject,

I'm not sure this has been asked or answered before, are we ever going to have a Bosting option in California? I mean, I'm drooling over the idea of having a Zetec reliable engine in my Westy but it needs to be CA legal for me to go for it....I bet there is a good market in Cali for the Bosting guys, there are plenty of Vanagons around here and engines are getting older by the day
_________________
1991 Westy auto w/ Peloquin TBD

"The only difference between me and a madman is that I'm not mad” - Salvador Dali

HeftySmurf · Posted: Tue Aug 18, 2009 11:18 am Post subject:

Mad span
I spoke to a guy who attemting to do so. Some different steps need to be taken. He said he has spoke with Jim and Brady and they are working on it..... Curious to see how it turns out. Thatd suck if you do the install and it doesn't pass....
_________________
-Lorenzo
90 GL w/ Bostig

candyman · Posted: Wed Dec 30, 2009 11:37 am Post subject:

well,
looks like i may be headed down the zetec route this winter. my question to the syncro guys with zetecs, What are you doing about your stock skid plate? will they fit with some mods? I am concerned about having my drivelline exposed

240Gordy · Posted: Wed Dec 30, 2009 2:34 pm Post subject:

there are aftermarket dry sump systems available for the zetec.
_________________
Tencentlife said,
"So, now that you know what you're doing, go to town."
2010 GOLF TRENDLINE 2.5
1985 GL now with more! a 2.1L
H&R SPORT(RED) Springs FRONT , SLAM SPECIALTIES RE6 AIRBAGS REAR


Hello! Log in or Register \| Help \| Donate \| Buy Shirts	See all banner ads \| Advertise on TheSamba.com

has anyone done the bostig conversion?
Page: Previous 1, 2, 3 ... , 9, 10, 11 Next Jump to:

	Forum Index -> Vanagon	All times are Mountain Standard Time/Pacific Daylight Savings Time Page: Previous 1, 2, 3 ... , 9, 10, 11 Next Jump to:
Page 10 of 11