Author |
Message |
63Ragtop NZ Samba Member
Joined: December 04, 2007 Posts: 895 Location: West Auckland
|
Posted: Mon Jun 04, 2012 8:03 pm Post subject: |
|
|
Well seeing as you asked, is that bonnet fitting right? looks to be sitting way to high in those last two pics? _________________ If you can't join them, beat them! |
|
Back to top |
|
|
Krmnnghia Samba Member
Joined: March 28, 2005 Posts: 797 Location: Michigan, Land of salty roads!
|
Posted: Mon Jun 04, 2012 9:02 pm Post subject: |
|
|
63Ragtop NZ wrote: |
Well seeing as you asked, is that bonnet fitting right? looks to be sitting way to high in those last two pics? |
Yah I noticed that in the pics. Can't be sure because these are the pics I got today via TXT. I am going to run in and take a look this week and see whats up. My guess is everything wasn't shut properly and bolted together 100% so it appears there is a gap. At least that better be the issue. |
|
Back to top |
|
|
DaKine Samba Member
Joined: April 10, 2006 Posts: 620 Location: Florida
|
Posted: Tue Jun 05, 2012 2:04 am Post subject: |
|
|
Looking good! You've got to be stoked
Looks like you've got over rider holes in the front but not in the rear
|
|
Back to top |
|
|
Krmnnghia Samba Member
Joined: March 28, 2005 Posts: 797 Location: Michigan, Land of salty roads!
|
Posted: Tue Jun 05, 2012 3:31 am Post subject: |
|
|
Yes all overrider holes will be filled...they just haven't gotten to the fronts yet. |
|
Back to top |
|
|
Krmnnghia Samba Member
Joined: March 28, 2005 Posts: 797 Location: Michigan, Land of salty roads!
|
Posted: Mon Jun 11, 2012 4:56 am Post subject: |
|
|
getting a little closer...
I will say to anyone doing a full resto and paying someone to do the work...Go look at the progress as much as possible. It is amazing what can be missed and most importantly what shows up after primer is applied. I got all marker happy last week when I went in. |
|
Back to top |
|
|
Krmnnghia Samba Member
Joined: March 28, 2005 Posts: 797 Location: Michigan, Land of salty roads!
|
Posted: Thu Jun 21, 2012 2:17 pm Post subject: |
|
|
Went and saw the car today. Paint has been ordered. I am going in on Monday to spend the day working on the car with my body guy. I offered since he is new to VW's and we don't want to miss anything. When I got back home these babies were on my porch!
Oh I also picked these up from a local guy last weekend. Dellorto FRD 34B's.
|
|
Back to top |
|
|
Krmnnghia Samba Member
Joined: March 28, 2005 Posts: 797 Location: Michigan, Land of salty roads!
|
Posted: Fri Jun 22, 2012 6:08 am Post subject: |
|
|
Got the motor tore down...now to really get dirty.
|
|
Back to top |
|
|
Krmnnghia Samba Member
Joined: March 28, 2005 Posts: 797 Location: Michigan, Land of salty roads!
|
Posted: Thu Jun 28, 2012 8:25 am Post subject: |
|
|
Got the Wheels mounted and on the pan. MMMmmmm
Had a local guy Compression check the engine and it was spot on. Endplay was questionable but I am going to run it as is and see how it goes. Might build a motor this winter.
Have ordered or picked up around $1000 in parts over the last week. UGH what a headache. Everytime I think I got most if it picked out I find a small piece I missed.
Checked out the car last night and it is getting sooo close. Might be able to paint at the end of next week or early the week after that. ;D |
|
Back to top |
|
|
DaKine Samba Member
Joined: April 10, 2006 Posts: 620 Location: Florida
|
Posted: Sun Jul 08, 2012 8:12 pm Post subject: |
|
|
This thing painted yet?? |
|
Back to top |
|
|
Krmnnghia Samba Member
Joined: March 28, 2005 Posts: 797 Location: Michigan, Land of salty roads!
|
Posted: Tue Jul 17, 2012 1:17 pm Post subject: |
|
|
Tonight...we paint!
|
|
Back to top |
|
|
GtiKyle Samba Member
Joined: March 27, 2008 Posts: 211 Location: Tacoma, WA
|
|
Back to top |
|
|
Krmnnghia Samba Member
Joined: March 28, 2005 Posts: 797 Location: Michigan, Land of salty roads!
|
Posted: Wed Jul 18, 2012 10:32 am Post subject: |
|
|
Well I am blown away....
|
|
Back to top |
|
|
Airkewld Samba Member
Joined: November 14, 2003 Posts: 3152 Location: Goodyear, AZ USA
|
|
Back to top |
|
|
webberjames95 Snorkelstang Finder
Joined: January 18, 2011 Posts: 1091 Location: Pullman, Washington
|
|
Back to top |
|
|
Krmnnghia Samba Member
Joined: March 28, 2005 Posts: 797 Location: Michigan, Land of salty roads!
|
Posted: Sat Jul 21, 2012 7:17 pm Post subject: |
|
|
One of the most nerve wracking time of my life. The front 4" narrowed beam required gentle use of a prybar to let the body drop in. Ugh. Then dropping the rear onto the mounts went something like, "Anyone see what it is hung up........BOOM!" I freaked but everything seems ok. The paint isn't perfect, it has its flaws and IMO looks better in the pics but I wasn't paying for a $15K paint job. Whatever I will drive the hell out of it and enjoy it.
Here she sits waiting to be wet sanded at the body shop...sooo can't wait to cruise in this.
|
|
Back to top |
|
|
DaKine Samba Member
Joined: April 10, 2006 Posts: 620 Location: Florida
|
Posted: Sat Jul 21, 2012 9:30 pm Post subject: |
|
|
Hell yeah!! looks bad ass.... |
|
Back to top |
|
|
juniorvick Samba Member
Joined: December 20, 2011 Posts: 221 Location: Whittier CA
|
Posted: Mon Jul 23, 2012 7:31 am Post subject: |
|
|
so bad ass!!!! |
|
Back to top |
|
|
thebucket Samba Stockbroker
Joined: April 06, 2004 Posts: 3734 Location: Houston Texas
|
|
Back to top |
|
|
Boondockshydrographics Samba Member
Joined: July 23, 2012 Posts: 3 Location: McConnells SC
|
Posted: Tue Jul 24, 2012 7:39 pm Post subject: |
|
|
AWESOME |
|
Back to top |
|
|
63Ragtop NZ Samba Member
Joined: December 04, 2007 Posts: 895 Location: West Auckland
|
Posted: Tue Jul 24, 2012 9:56 pm Post subject: |
|
|
one badass bug there!
well done! _________________ If you can't join them, beat them! |
|
Back to top |
|
|
|