Girling calipers

[Ted2]

Well, I managed to twist off a bleeder valve on a rather rusty Girling caliper.

Any I dea where I can find new Girling calipers?

Thanks

[leecat]

Rockauto has Girlings super cheap, not sure what year your van is.

[ALIKA T3]

[MarkWard]

Someone skilled like a local machine shop might be able to remove the broken off section without damaging the sealing seat. Our racing calipers use 1/8 pipe thread adapters with bleeder valves installed in the adapters. One could probably be adapted to a Girling caliper again with someone skilled that has the tools. When you figure labor though, replacement units start looking more reasonable.

https://www.summitracing.com/parts/wil-220-0063?se..._mEALw_wcB
_________________
☮️

[Van den Broke]

I've drilled out a few bleeder screws over the years. It's way easier than most broken bolts, since there's a center hole that guides the drill.
After drilling, it is usually necessary to then retap the hole.