65 clutch swap

128vw · Posted: Sat May 10, 2008 1:55 pm Post subject: 65 clutch swap

I have a 65 that i am going to put a 2332 engine into as a daily driver.
I have been told that the newer type clutch is a better clutch. What do I have to change to do this? Question

johnanddes · Posted: Sat May 10, 2008 9:08 pm Post subject:

the clutch and pressure plate. hopefully that stock clutch will hold...
_________________
John

1969 documented numbers matching bug
1968 F250

Keepin the ISS from colliding with space junk

Russ Wolfe · Posted: Sat May 10, 2008 9:14 pm Post subject:

It will need to be a 200mm with a soring loaded disc. Unluckily, you cannot use the newest style with the sleeved T/O bearing.
_________________
Society is like stew. If you don't keep it stirred up, you end up with a lot of scum on the top!--Edward Abbey

Gary: OK. Ima poop.

128vw · Posted: Sun May 11, 2008 4:39 am Post subject:

I am using the 200mm now as I have changed to a 1600 and 12v. I want to use the newer style of 200mm. Is this possible? What do I have to change?


Hello! Log in or Register \| Help \| Donate \| Buy Shirts	See all banner ads \| Advertise on TheSamba.com

	Forum Index -> Beetle - 1958-1967	All times are Mountain Standard Time/Pacific Daylight Savings Time
Page 1 of 1