Author |
Message |
RevsBaja Samba Member
Joined: July 20, 2016 Posts: 4 Location: Nebraska
|
Posted: Sat Jan 28, 2017 1:10 pm Post subject: Circled P Stamp on Case |
|
|
Hello everyone! This is my first post but I've been checking out the forums and found a number of parts on the Samba classifieds.
I am working on a 40hp engine for a baja project that I picked up last summer. The plan is to make it a 1385.
The case I have is a 1964. On the top of the case, there's two stamps with a circled P. I've read about the P stamp on cases but not in this style or on this part of the case.
Anybody have an idea of what it means?
|
|
Back to top |
|
|
glutamodo The Android
Joined: July 13, 2004 Posts: 26325 Location: Douglas, WY
|
Posted: Thu Feb 09, 2017 12:15 am Post subject: Re: Circled P Stamp on Case |
|
|
If you're read about the P-stamp, I'm guessing it included comments from myself. However I've never seen one like that before. Really, if VW stamped it, it's supposed to mean they "planed" the case halves prior to line-boring, and that included cutting cam bearing shells even if the case didn't have them before. So I'd look and see if the case has cam bearing shells. _________________ Andy T.
IMAGE NOTE: It has been noted that Chrome based browsers may have issues in displaying my vast image library, which use non-secure links and are on an FTP server. Images should still be viewable if the link is clicked though.
I do not know how to fix this. All I can say is it all works fine for me with what I use, Firefox. |
|
Back to top |
|
|
RevsBaja Samba Member
Joined: July 20, 2016 Posts: 4 Location: Nebraska
|
Posted: Thu Feb 16, 2017 7:34 pm Post subject: Re: Circled P Stamp on Case |
|
|
Thanks for the info. When I got the car, the engine was already in pieces so there were no bearings in the case (main or cam). Is there a way to tell if the case has been cut for cam bearings? |
|
Back to top |
|
|
glutamodo The Android
Joined: July 13, 2004 Posts: 26325 Location: Douglas, WY
|
Posted: Thu Feb 16, 2017 10:19 pm Post subject: Re: Circled P Stamp on Case |
|
|
If it was properly cut for cam bearings, you'll see the little notches for the bearing shells to lock into.
_________________ Andy T.
IMAGE NOTE: It has been noted that Chrome based browsers may have issues in displaying my vast image library, which use non-secure links and are on an FTP server. Images should still be viewable if the link is clicked though.
I do not know how to fix this. All I can say is it all works fine for me with what I use, Firefox. |
|
Back to top |
|
|
|