Author |
Message |
Buttafuoco Samba Member
Joined: June 23, 2008 Posts: 263 Location: Nor*Cal
|
Posted: Sun Dec 28, 2008 11:51 am Post subject: Lets see your @sses...rear shots of your T3 that is. |
|
|
Heres a few shots from the rear of my Fasty and mini chopper along with a vid of the mini chopper in action!
http://www.youtube.com/watch?v=y8_9iGxKxk4 |
|
Back to top |
|
|
Stefan T Samba Member
Joined: February 09, 2008 Posts: 102 Location: Ullared Sweden
|
Posted: Sun Dec 28, 2008 1:59 pm Post subject: |
|
|
Her's photos of my convertible from the rear end
|
|
Back to top |
|
|
FASTBACKDON The other insensitive jerk like Neil
Joined: October 08, 2004 Posts: 3592 Location: TORRANCE CALIF
|
Posted: Sun Dec 28, 2008 2:08 pm Post subject: |
|
|
_________________ FUCK CANCER FUCK CANCER FUCK CANCER!!
Mom 25 months of standing up to Cancer R.I.P I miss you so much.
Buy my best friends stuff
http://www.thesamba.com/vw/classifieds/search.php?username=56TIMOTEO
(21:10:42) Jennepher: Russell is our proudest achievment. I feel like Samba created him from a little nugget of crap into a full blown adult. |
|
Back to top |
|
|
Nectar_F Samba Member
Joined: August 19, 2002 Posts: 427 Location: Melbourne, Australia
|
Posted: Sun Dec 28, 2008 2:44 pm Post subject: |
|
|
Heres my rear end |
|
Back to top |
|
|
Buttafuoco Samba Member
Joined: June 23, 2008 Posts: 263 Location: Nor*Cal
|
Posted: Sun Dec 28, 2008 3:05 pm Post subject: |
|
|
Those standoffs look exactly like the ones I put on my Fasty.... SAWEET!!!! |
|
Back to top |
|
|
Adriel Rowley Samba Member
Joined: October 12, 2006 Posts: 4748 Location: Mesa, Arizona
|
|
Back to top |
|
|
squaretobehip Samba Member
Joined: August 23, 2004 Posts: 3690 Location: San Jose, CA
|
Posted: Sun Dec 28, 2008 3:55 pm Post subject: |
|
|
Sally's sweet ass. |
|
Back to top |
|
|
RafCarre12 Samba Member
Joined: January 06, 2008 Posts: 1019 Location: Glen Rock, NJ
|
Posted: Sun Dec 28, 2008 3:59 pm Post subject: |
|
|
_________________ Type 3 Fasty
Last edited by RafCarre12 on Sun Dec 28, 2008 4:00 pm; edited 1 time in total |
|
Back to top |
|
|
Buttafuoco Samba Member
Joined: June 23, 2008 Posts: 263 Location: Nor*Cal
|
Posted: Sun Dec 28, 2008 4:00 pm Post subject: |
|
|
NICE! |
|
Back to top |
|
|
localboy Samba Longboarder
Joined: December 06, 2003 Posts: 5153 Location: "Mainland", PNW
|
Posted: Sun Dec 28, 2008 4:15 pm Post subject: |
|
|
[img][/img] _________________ One man's "patina" is another man's cancer...
Black '65 Resto-Custom S Notch 2110 cc powered
original paint Pearl White '66 Westy SO-42
Allstate single-wheel trailer project |
|
Back to top |
|
|
FASTBACKDON The other insensitive jerk like Neil
Joined: October 08, 2004 Posts: 3592 Location: TORRANCE CALIF
|
Posted: Sun Dec 28, 2008 4:46 pm Post subject: |
|
|
Buttafuoco wrote: |
Those standoffs look exactly like the ones I put on my Fasty.... SAWEET!!!! |
Yea they are the same ones I had on my 67 fastback way back in the 80's _________________ FUCK CANCER FUCK CANCER FUCK CANCER!!
Mom 25 months of standing up to Cancer R.I.P I miss you so much.
Buy my best friends stuff
http://www.thesamba.com/vw/classifieds/search.php?username=56TIMOTEO
(21:10:42) Jennepher: Russell is our proudest achievment. I feel like Samba created him from a little nugget of crap into a full blown adult. |
|
Back to top |
|
|
Air_Cooled_Nut Samba Member
Joined: March 27, 2004 Posts: 3040 Location: Portland, Oregon
|
Posted: Sun Dec 28, 2008 4:51 pm Post subject: |
|
|
A little more recent:
_________________ Toby http://www.aircoolednut.com/
Did I mention that I'm an original Darksider?
'72 VW Squareback, 2007cc, GB 5-speed, rag top; '76 VW Riviera Penthouse Sundowner 2.0L; 2015 Audi S5 Cabby w/Stage II APR; '06 Ducati Sport Classic 1000; '14 Ducati Diavel Strada
The First Invasion |
|
Back to top |
|
|
Buttafuoco Samba Member
Joined: June 23, 2008 Posts: 263 Location: Nor*Cal
|
Posted: Sun Dec 28, 2008 4:52 pm Post subject: |
|
|
FASTBACKDON wrote: |
Buttafuoco wrote: |
Those standoffs look exactly like the ones I put on my Fasty.... SAWEET!!!! |
Yea they are the same ones I had on my 67 fastback way back in the 80's |
I made mine out of a sheet of 12ga. metal I had layin around, cut them 5"x4" and drilled the holes. LOL, took about 30mins in all. |
|
Back to top |
|
|
FASTBACKDON The other insensitive jerk like Neil
Joined: October 08, 2004 Posts: 3592 Location: TORRANCE CALIF
|
Posted: Sun Dec 28, 2008 4:58 pm Post subject: |
|
|
I made mine out of 1/4 inch flat stock alunimum (sp) plus I still have the og templates I made way back when.
Quote: |
I made mine out of a sheet of 12ga. metal I had layin around, cut them 5"x4" and drilled the holes. LOL, took about 30mins in all. |
_________________ FUCK CANCER FUCK CANCER FUCK CANCER!!
Mom 25 months of standing up to Cancer R.I.P I miss you so much.
Buy my best friends stuff
http://www.thesamba.com/vw/classifieds/search.php?username=56TIMOTEO
(21:10:42) Jennepher: Russell is our proudest achievment. I feel like Samba created him from a little nugget of crap into a full blown adult. |
|
Back to top |
|
|
Buttafuoco Samba Member
Joined: June 23, 2008 Posts: 263 Location: Nor*Cal
|
Posted: Sun Dec 28, 2008 5:01 pm Post subject: |
|
|
FASTBACKDON wrote: |
I made mine out of 1/4 inch flat stock alunimum (sp) plus I still have the og templates I made way back when. |
I had to raise the latch about 3/8" to get it to close securely and keep an even gap around the bottom. Did you have this issue? I do have about a 4" opening at the top. |
|
Back to top |
|
|
FASTBACKDON The other insensitive jerk like Neil
Joined: October 08, 2004 Posts: 3592 Location: TORRANCE CALIF
|
Posted: Sun Dec 28, 2008 5:06 pm Post subject: |
|
|
Buttafuoco wrote: |
FASTBACKDON wrote: |
I made mine out of 1/4 inch flat stock alunimum (sp) plus I still have the og templates I made way back when. |
I had to raise the latch about 3/8" to get it to close securely and keep an even gap around the bottom. Did you have this issue? I do have about a 4" opening at the top. |
Nope never had to adjust anything the opening on mine is about 2 1/2 inches _________________ FUCK CANCER FUCK CANCER FUCK CANCER!!
Mom 25 months of standing up to Cancer R.I.P I miss you so much.
Buy my best friends stuff
http://www.thesamba.com/vw/classifieds/search.php?username=56TIMOTEO
(21:10:42) Jennepher: Russell is our proudest achievment. I feel like Samba created him from a little nugget of crap into a full blown adult. |
|
Back to top |
|
|
Buttafuoco Samba Member
Joined: June 23, 2008 Posts: 263 Location: Nor*Cal
|
Posted: Sun Dec 28, 2008 5:09 pm Post subject: |
|
|
FASTBACKDON wrote: |
Buttafuoco wrote: |
FASTBACKDON wrote: |
I made mine out of 1/4 inch flat stock alunimum (sp) plus I still have the og templates I made way back when. |
I had to raise the latch about 3/8" to get it to close securely and keep an even gap around the bottom. Did you have this issue? I do have about a 4" opening at the top. |
Nope never had to adjust anything the opening on mine is about 2 1/2 inches |
I had contemplated ripping the standoffs down a bit to avoid raising the latch but I liked the gap and figured it was gonna be quicker to stuff a few washers under the latch. |
|
Back to top |
|
|
FASTBACKDON The other insensitive jerk like Neil
Joined: October 08, 2004 Posts: 3592 Location: TORRANCE CALIF
|
Posted: Sun Dec 28, 2008 5:14 pm Post subject: |
|
|
Buttafuoco wrote: |
FASTBACKDON wrote: |
Buttafuoco wrote: |
FASTBACKDON wrote: |
I made mine out of 1/4 inch flat stock alunimum (sp) plus I still have the og templates I made way back when. |
I had to raise the latch about 3/8" to get it to close securely and keep an even gap around the bottom. Did you have this issue? I do have about a 4" opening at the top. |
Nope never had to adjust anything the opening on mine is about 2 1/2 inches |
I had contemplated ripping the standoffs down a bit to avoid raising the latch but I liked the gap and figured it was gonna be quicker to stuff a few washers under the latch. |
Understood
I just never gave it much thought when I first made them and liked the subtle height of mine yours looks good _________________ FUCK CANCER FUCK CANCER FUCK CANCER!!
Mom 25 months of standing up to Cancer R.I.P I miss you so much.
Buy my best friends stuff
http://www.thesamba.com/vw/classifieds/search.php?username=56TIMOTEO
(21:10:42) Jennepher: Russell is our proudest achievment. I feel like Samba created him from a little nugget of crap into a full blown adult. |
|
Back to top |
|
|
rhyno811 Samba Member
Joined: July 27, 2008 Posts: 193 Location: Bradenton FL
|
Posted: Sun Dec 28, 2008 6:13 pm Post subject: |
|
|
Heeeeere's PUDDLES! |
|
Back to top |
|
|
abgwin Samba Member
Joined: August 22, 2004 Posts: 1490 Location: Toledo, oHIo
|
Posted: Sun Dec 28, 2008 7:05 pm Post subject: |
|
|
|
|
Back to top |
|
|
|