meyervw Samba Member
Joined: January 29, 2006 Posts: 470 Location: Chico, California
|
Posted: Mon Feb 02, 2009 6:39 pm Post subject: Output shaft seals and o-ring job finished. |
|
|
So sunday I was able to get Gustav to work and get the manual trans worked on. Drained the gear oil. Put in new seals and the o-rings for adjusters. Got it all back in and decided to repack the bearings since they were right there. It took about 3 hours. I didn't have the special tool for removing the adjusters so that took awhile.
Next moth I will drop the fuel tank and reseal that up too. I watch one get done today and it look easy enough. _________________ Spelling in my post may or may not be correct.
Gustav 1987 Wolfsburg Edition |
|