Author |
Message |
Lars B Samba Member
Joined: May 19, 2006 Posts: 205 Location: Sweden
|
Posted: Mon Jul 16, 2018 11:55 am Post subject: Re: 1937 Prototype W30 chassis 26 |
|
|
Outstanding workmanship.
Thanks for sharing. |
|
Back to top |
|
|
Undis Samba Member
Joined: October 24, 2006 Posts: 1396 Location: Riga, Latvia & Sydney, Australia
|
Posted: Thu Aug 09, 2018 1:40 am Post subject: Re: 1937 Prototype W30 chassis 26 |
|
|
A new update. The guys at HO have been busy getting the seat fixating system in place and finishing one seat frame to test it all out. It is quite an elaborate setup compared to the later bolt and wingnut fixing approach on the later cars.
|
|
Back to top |
|
|
D-train Samba Member
Joined: January 08, 2007 Posts: 1449
|
Posted: Thu Aug 09, 2018 3:14 am Post subject: Re: 1937 Prototype W30 chassis 26 |
|
|
It’s bloody amazing that skill and dedication! _________________ shiny paint doesnt make it worth any more |
|
Back to top |
|
|
cory464 Samba Member
Joined: November 25, 2010 Posts: 659 Location: kokomo in
|
Posted: Thu Aug 09, 2018 4:51 am Post subject: Re: 1937 Prototype W30 chassis 26 |
|
|
unbelievable. were the seats made or are these originals? |
|
Back to top |
|
|
Zwitterkafer Samba Member
Joined: November 17, 2007 Posts: 875 Location: Lanark County, Ontario, Canada
|
Posted: Thu Aug 09, 2018 9:48 am Post subject: Re: 1937 Prototype W30 chassis 26 |
|
|
Beautiful work on building this seat! I assume that the extended tubing end is there to allow some fore and aft adjustment? Interesting, the handbrake must be fully released before contacting that crossbar. Rear seat passengers would be well advised to keep their feet clear of those metal "fangs". Oops......that beach scene is not exactly focused on sun and sand. _________________ "Criticism comes easier than Craftsmanship"
- Zeuxius, 400 BC |
|
Back to top |
|
|
mandraks Samba Member
Joined: November 28, 2004 Posts: 7045 Location: Lawrenceville, Ga
|
Posted: Thu Aug 09, 2018 3:36 pm Post subject: Re: 1937 Prototype W30 chassis 26 |
|
|
love the elegance and simplicity of the seats. Looks like it would not be difficult to improve the wingnut method to something somewhat user friendly _________________ regards
Uli
----------------------------------------
'53 3-Fold Oval, L35 Metallic Blue, looking for a narrow hatch panel |
|
Back to top |
|
|
Jack O'Neill Samba Member
Joined: March 23, 2009 Posts: 102 Location: Israel
|
Posted: Thu Aug 09, 2018 7:23 pm Post subject: Re: 1937 Prototype W30 chassis 26 |
|
|
Several orders of magnitude bellow, I've used a similar arrangement in my scale model - but my crossbar is a q-tip =)
Here they are, in various stages of development:
I never properly finished this model, since I got a new job (and eventually a new wife) shortly after those pictures were taken. Since this topic is active again, guess I'll take it out of storage and retrofit the historical details as they show up here. |
|
Back to top |
|
|
WrennMetallWerks Samba Member
Joined: December 06, 2007 Posts: 2616 Location: Rescue ca
|
|
Back to top |
|
|
sweden Samba Member
Joined: May 30, 2006 Posts: 227 Location: sweden
|
Posted: Wed Aug 29, 2018 8:59 am Post subject: Re: 1937 Prototype W30 chassis 26 |
|
|
All pictures on the build is really interesting to follow.
What we miss just like in the 38 thread is more detail on what original parts that have been found and some history about them and pictures.
Please for us who never come close to these historic cars. _________________ Me and my sons cars Typ1 -49 -50 -51 -52 -52 -53 -53 -54 -55 -55 -56 -56 -57 -58 cab -64 cab
T3 TriStar airride with Audi 1,8T engine and Porsche 996 gearbox. |
|
Back to top |
|
|
Blue Baron VW Aficionado
Joined: June 16, 2006 Posts: 23763 Location: Southeast USA
|
Posted: Wed Aug 29, 2018 9:49 am Post subject: Re: 1937 Prototype W30 chassis 26 |
|
|
Correct me if I'm wrong, but I think we've seen the original parts, and the rest is well-informed fabrication. _________________ We are striving for perfection, to make our cars run forever, if possible.
Heinz Nordhoff |
|
Back to top |
|
|
sweden Samba Member
Joined: May 30, 2006 Posts: 227 Location: sweden
|
Posted: Wed Aug 29, 2018 10:14 am Post subject: Re: 1937 Prototype W30 chassis 26 |
|
|
Blue Baron wrote: |
Correct me if I'm wrong, but I think we've seen the original parts, and the rest is well-informed fabrication. |
Christian wrote in 2009 There is more that belongs to the chassis.
Christian wrote 2011 When looking for parts for the 38 we came across some orginal parts for typ 30 - but this will be a story later this year .
Tom wrote in 2009
This is really super first time I saw this type chassis.
But one time I sam some parts for this type chassis.
I dont have the camera so I dont have any pictures.
But I remember that it was gearbox and some parts fro the engine and front axel. And this parts was at one gut in Austria.
meaby it was from that same chassis?
I need to chack this.
Soo there is more parts. _________________ Me and my sons cars Typ1 -49 -50 -51 -52 -52 -53 -53 -54 -55 -55 -56 -56 -57 -58 cab -64 cab
T3 TriStar airride with Audi 1,8T engine and Porsche 996 gearbox. |
|
Back to top |
|
|
[email protected] Samba Member
Joined: June 24, 2015 Posts: 715 Location: Rialto. CA
|
Posted: Wed Aug 29, 2018 9:51 pm Post subject: Re: 1937 Prototype W30 chassis 26 |
|
|
pastellgreen wrote: |
Stunning work!
Is there any plan what components as engine, axle and gearbox will be used? Did anything else pre 1938 survived like these cylinderheads in 1960?
I wonder if they are still there and if more parts survived... |
That would nice to get a hold of those 1936 dual port heads and put them on a newer 25hp and see what hp can it get with those. Heads..anyone make replicas of them ?????? |
|
Back to top |
|
|
splitjunkie Samba Member
Joined: April 04, 2006 Posts: 4083
|
Posted: Sat Sep 01, 2018 5:59 pm Post subject: Re: 1937 Prototype W30 chassis 26 |
|
|
[email protected] wrote: |
pastellgreen wrote: |
Stunning work!
Is there any plan what components as engine, axle and gearbox will be used? Did anything else pre 1938 survived like these cylinderheads in 1960?
I wonder if they are still there and if more parts survived... |
That would nice to get a hold of those 1936 dual port heads and put them on a newer 25hp and see what hp can it get with those. Heads..anyone make replicas of them ?????? |
The question I have to ask is - The picture appears to have been taken with all three heads actually sitting next to each other. The newest head is from a '60 so does that mean that one of those '36 heads was in existence at that time or was that a mockup or composited photo? _________________ Chris
You know, a lot of these scratches will buff right out... Jerry Seinfeld |
|
Back to top |
|
|
[email protected] Samba Member
Joined: June 24, 2015 Posts: 715 Location: Rialto. CA
|
Posted: Sat Sep 01, 2018 6:21 pm Post subject: Re: 1937 Prototype W30 chassis 26 |
|
|
splitjunkie wrote: |
[email protected] wrote: |
pastellgreen wrote: |
Stunning work!
Is there any plan what components as engine, axle and gearbox will be used? Did anything else pre 1938 survived like these cylinderheads in 1960?
I wonder if they are still there and if more parts survived... |
That would nice to get a hold of those 1936 dual port heads and put them on a newer 25hp and see what hp can it get with those. Heads..anyone make replicas of them ?????? |
The question I have to ask is - The picture appears to have been taken with all three heads actually sitting next to each other. The newest head is from a '60 so does that mean that one of those '36 heads was in existence at that time or was that a mockup or composited photo? |
The picture of the heads was just to show the difference in heads I guess.. the 1960 head is a 36hp cylinder head from 1959/60 the first type2 bastard engine it used a 64mm crank used 36hp rods compression was the same as the early 36hp so it was built like a 36hp so was it was known as a 36hp and later changed to 40hp as we know in late 1960 ... |
|
Back to top |
|
|
splitjunkie Samba Member
Joined: April 04, 2006 Posts: 4083
|
Posted: Sat Sep 01, 2018 6:52 pm Post subject: Re: 1937 Prototype W30 chassis 26 |
|
|
[email protected] wrote: |
splitjunkie wrote: |
[email protected] wrote: |
pastellgreen wrote: |
Stunning work!
Is there any plan what components as engine, axle and gearbox will be used? Did anything else pre 1938 survived like these cylinderheads in 1960?
I wonder if they are still there and if more parts survived... |
That would nice to get a hold of those 1936 dual port heads and put them on a newer 25hp and see what hp can it get with those. Heads..anyone make replicas of them ?????? |
The question I have to ask is - The picture appears to have been taken with all three heads actually sitting next to each other. The newest head is from a '60 so does that mean that one of those '36 heads was in existence at that time or was that a mockup or composited photo? |
The picture of the heads was just to show the difference in heads I guess.. the 1960 head is a 36hp cylinder head from 1959/60 the first type2 bastard engine it used a 64mm crank used 36hp rods compression was the same as the early 36hp so it was built like a 36hp so was it was known as a 36hp and later changed to 40hp as we know in late 1960 ... |
Yes but you are missing the point. That picture was taken around 1960. That means whoever took the picture has a 1936 head to photograph. _________________ Chris
You know, a lot of these scratches will buff right out... Jerry Seinfeld |
|
Back to top |
|
|
[email protected] Samba Member
Joined: June 24, 2015 Posts: 715 Location: Rialto. CA
|
Posted: Sat Sep 01, 2018 7:02 pm Post subject: Re: 1937 Prototype W30 chassis 26 |
|
|
splitjunkie wrote: |
[email protected] wrote: |
splitjunkie wrote: |
[email protected] wrote: |
pastellgreen wrote: |
Stunning work!
Is there any plan what components as engine, axle and gearbox will be used? Did anything else pre 1938 survived like these cylinderheads in 1960?
I wonder if they are still there and if more parts survived... |
That would nice to get a hold of those 1936 dual port heads and put them on a newer 25hp and see what hp can it get with those. Heads..anyone make replicas of them ?????? |
The question I have to ask is - The picture appears to have been taken with all three heads actually sitting next to each other. The newest head is from a '60 so does that mean that one of those '36 heads was in existence at that time or was that a mockup or composited photo? |
The picture of the heads was just to show the difference in heads I guess.. the 1960 head is a 36hp cylinder head from 1959/60 the first type2 bastard engine it used a 64mm crank used 36hp rods compression was the same as the early 36hp so it was built like a 36hp so was it was known as a 36hp and later changed to 40hp as we know in late 1960 ... |
Yes but you are missing the point. That picture was taken around 1960. That means whoever took the picture has a 1936 head to photograph. |
Oh yeah I know there its out there 😊 in come ones collection but who knows if they didn't take care of it or and junked them ...😣 but only time will tell when or if that person comes up and says here is one 🤞 and make repops of them easy said than done ... |
|
Back to top |
|
|
sweden Samba Member
Joined: May 30, 2006 Posts: 227 Location: sweden
|
Posted: Mon Sep 03, 2018 2:08 am Post subject: Re: 1937 Prototype W30 chassis 26 |
|
|
Do any know that all three heads was in same place in the 1960s photography.
I think the light falls different on the heads on the pictures, early photoshop (cut and glue)? _________________ Me and my sons cars Typ1 -49 -50 -51 -52 -52 -53 -53 -54 -55 -55 -56 -56 -57 -58 cab -64 cab
T3 TriStar airride with Audi 1,8T engine and Porsche 996 gearbox.
Last edited by sweden on Tue Sep 04, 2018 1:25 am; edited 1 time in total |
|
Back to top |
|
|
Grant Reiling Samba Slow-Change Artist
Joined: November 28, 2003 Posts: 491 Location: behind the wheel
|
Posted: Mon Sep 03, 2018 9:25 pm Post subject: Re: 1937 Prototype W30 chassis 26 |
|
|
sweden wrote: |
Do any know that all three heads was [sic] in same place in the 1960s photography.
I think the light falls different on the heads on the pictures, early photoshop? |
To be blunt; no.
1) given that said photograph dates to 1960 or so; Photoshop did not even exist for nearly thirty years. (1988 introduction of PS 1.0): https://creativeoverflow.net/history-of-photoshop-journey-from-photoshop-1-0-to-photoshop-cs5/
and 2) they all appear pretty evenly illuminated in the image being discussed.
Finally, assuming the earliest (1936) dual-port head; even if not present at the photo-shoot; would've been 'key lined' {composited} into the final version sent to printers for distribution.
Still; a fascinating compendium of historical roots of VW engine design development. _________________ 1952 Azure Blue 12G (LHD Deluxe 3-fold sunroof Sedan).
"What you really know is possible in your heart is possible.
We make it possible by our will.
What we imagine in our minds becomes our world. That’s just one of many things I have learned from water."
Misaru Emoto
The Hidden Messages in Water |
|
Back to top |
|
|
splitjunkie Samba Member
Joined: April 04, 2006 Posts: 4083
|
Posted: Tue Sep 04, 2018 7:46 am Post subject: Re: 1937 Prototype W30 chassis 26 |
|
|
Grant Reiling wrote: |
sweden wrote: |
Do any know that all three heads was [sic] in same place in the 1960s photography.
I think the light falls different on the heads on the pictures, early photoshop? |
To be blunt; no.
1) given that said photograph dates to 1960 or so; Photoshop did not even exist for nearly thirty years. (1988 introduction of PS 1.0): https://creativeoverflow.net/history-of-photoshop-journey-from-photoshop-1-0-to-photoshop-cs5/
and 2) they all appear pretty evenly illuminated in the image being discussed.
Finally, assuming the earliest (1936) dual-port head; even if not present at the photo-shoot; would've been 'key lined' {composited} into the final version sent to printers for distribution.
Still; a fascinating compendium of historical roots of VW engine design development. |
There were systems that did a lot of what photoshop did before Photoshop. They weren't around in '60 though. They were very specialized and expensive. One such company was Crosfield Electronics, a British company. Photoshop put them all out of business. _________________ Chris
You know, a lot of these scratches will buff right out... Jerry Seinfeld |
|
Back to top |
|
|
usariemen Samba Member
Joined: August 28, 2004 Posts: 1745 Location: Germany
|
Posted: Tue Sep 04, 2018 12:58 pm Post subject: Re: 1937 Prototype W30 chassis 26 |
|
|
splitjunkie wrote: |
Yes but you are missing the point. That picture was taken around 1960. That means whoever took the picture has a 1936 head to photograph. |
Or had just pictures of a 1936 head and used them along with pics made of newer heads.
Back in the 50s 60s they cut and glued and brushed photos and negatives all the time. Not by computer of course, literally with scissors. |
|
Back to top |
|
|
|