Author |
Message |
Bleyseng Samba Member
Joined: July 03, 2005 Posts: 4752 Location: Seattle
|
Posted: Mon Jul 06, 2009 5:29 pm Post subject: How do the top locating pins mount? |
|
|
On a 70 conv, how do those chrome locating pins mount? _________________ 70 Ghia Black convert-9/69 build date-stock w/133k 1600 SP-barn find now with a rebuilt tranny and engine
77 Westy 2.0L w/Ljet, Camper Special engine-95hp and with LSD!(sold)
76 Porsche 914 2.1L L20c, 120hp Djet (sold)
87 Syncro Westy Titan Red 2.1L 2 knob 100k miles |
|
Back to top |
|
|
Ghiaddict Samba Member
Joined: November 20, 2002 Posts: 2632 Location: Now in Honea Path, SC
|
Posted: Mon Jul 06, 2009 5:57 pm Post subject: |
|
|
They screw onto studs welded to the underside
of the top frame corner plates. The studs protrude down
through holes found in the front header bow.
If your top frame is original, there's a good chance
the studs are no longer present. Time and moisture
takes it's toll on them.
New corner plates are available from a couple of vendors,
but replacing them can be a major project.
See one here: http://www2.cip1.com/ProductDetails.asp?ProductCode=VWC%2D141%2D871%2D691%2DV _________________ ****************************
Karmann Ghia & Beetle parts available.
Convertible tops installed. |
|
Back to top |
|
|
Bleyseng Samba Member
Joined: July 03, 2005 Posts: 4752 Location: Seattle
|
Posted: Mon Jul 06, 2009 9:53 pm Post subject: |
|
|
ok, thanks that makes sense now. Looks like a major future project.... _________________ 70 Ghia Black convert-9/69 build date-stock w/133k 1600 SP-barn find now with a rebuilt tranny and engine
77 Westy 2.0L w/Ljet, Camper Special engine-95hp and with LSD!(sold)
76 Porsche 914 2.1L L20c, 120hp Djet (sold)
87 Syncro Westy Titan Red 2.1L 2 knob 100k miles |
|
Back to top |
|
|
|