Author |
Message |
djkeev Samba Moderator
Joined: September 30, 2007 Posts: 32634 Location: Reading Pennsylvania
|
Posted: Wed Mar 06, 2024 2:44 pm Post subject: Automatic Transmission Shift Cable Boot |
|
|
I'm sure that I'm far from alone, but the shift boot on my Automatic Shift Cable has seen better days.
Part # 211713269B
I looked up the part number and did a search but as with many items I came up empty.
Now, this isn't a huge deal to have a good boot here. It works just fine with the crappy boot it has.
I do worry about dirt working in or worse water that freezes and locks the car in gear.
I measured the boot today.
The narrow end is 6mm (.240")
The wide end is 15mm (.588")
The length is about 2" though it my opinion it really doesn't matter too much.
I'm just wondering if anyone has seen boots similar to this on newer cars or maybe in Marine or Aviation applications?
There are a lot of us who see a lot of things.....
Just tossing it out there....... keep your eyes open if you would.
Thanks!
Dave _________________ Stop Dead Photo Links how to post photos
Ghia
http://www.thesamba.com/vw/forum/viewtopic.php?t=392473
Vanagon
http://www.thesamba.com/vw/forum/viewtopic.php?p=6315537#6315537
Beetle
https://www.thesamba.com/vw/forum/viewtopic.php?t=482968&highlight=74+super+vert
Last edited by djkeev on Thu Mar 07, 2024 8:29 am; edited 1 time in total |
|
Back to top |
|
|
Silverghost500 Samba Member
Joined: August 01, 2018 Posts: 1089 Location: Atlanta, GA
|
|
Back to top |
|
|
djkeev Samba Moderator
Joined: September 30, 2007 Posts: 32634 Location: Reading Pennsylvania
|
|
Back to top |
|
|
SCM Samba Member
Joined: January 26, 2011 Posts: 3119 Location: Bozeman MT
|
Posted: Wed Mar 06, 2024 4:09 pm Post subject: Re: Automatic Transmission Shift Cable Boot |
|
|
djkeev wrote: |
I've seen a boot for Bicycle brake cables but they look far too short.
Dave |
That was the first thought I had too and I probably even have one or two in my pile of obsolete bicycle parts. But, in addition to being too short, I suspect the hole is too small since a bike brake cable is only about 1 mm in diameter.
Do let us know how the moto part you ordered works out. My cable boot is essentially a pile of rubber o-rings at this point. _________________ '91 Westfalia GL Automatic (GTA "Turbo" Rebuild w/Peloquin) and 2.3L GoWesty Engine |
|
Back to top |
|
|
MarkWard Samba Member
Joined: February 09, 2005 Posts: 17155 Location: Retired South Florida
|
Posted: Wed Mar 06, 2024 4:29 pm Post subject: Re: Automatic Transmission Shift Cable Boot |
|
|
The 78 through 81 911 SC used a similar boot on the clutch cable if this doesn’t pan out. _________________ ☮️ |
|
Back to top |
|
|
VicVan Samba Member
Joined: July 01, 2015 Posts: 1845 Location: Vancouver Island, BC
|
Posted: Wed Mar 06, 2024 7:16 pm Post subject: Re: Automatic Transmission Shift Cable Boot |
|
|
Here is my solution...
_________________ '90 Little Blue Truck, 2WD auto, FAS GenV 2.0 NA (AVH) |
|
Back to top |
|
|
djkeev Samba Moderator
Joined: September 30, 2007 Posts: 32634 Location: Reading Pennsylvania
|
|
Back to top |
|
|
MarkWard Samba Member
Joined: February 09, 2005 Posts: 17155 Location: Retired South Florida
|
|
Back to top |
|
|
djkeev Samba Moderator
Joined: September 30, 2007 Posts: 32634 Location: Reading Pennsylvania
|
|
Back to top |
|
|
MarkWard Samba Member
Joined: February 09, 2005 Posts: 17155 Location: Retired South Florida
|
Posted: Thu Mar 07, 2024 8:52 am Post subject: Re: Automatic Transmission Shift Cable Boot |
|
|
The boot ends are pretty small. I had to use silicone paste to get them over the Porsche cable and conduit. If they ended up being loose, a couple small tie taps could take up the difference. Just looked very similar and it’s German. _________________ ☮️ |
|
Back to top |
|
|
Wildthings Samba Member
Joined: March 13, 2005 Posts: 50352
|
Posted: Thu Mar 07, 2024 4:30 pm Post subject: Re: Automatic Transmission Shift Cable Boot |
|
|
If you have a pick your own wrecking yard close by, you can just cruise the rows looking for boots off of newer vehicles. |
|
Back to top |
|
|
djkeev Samba Moderator
Joined: September 30, 2007 Posts: 32634 Location: Reading Pennsylvania
|
|
Back to top |
|
|
skills@eurocarsplus Samba Peckerhead
Joined: January 01, 2007 Posts: 16883 Location: sticksville, ct.
|
Posted: Thu Mar 07, 2024 8:44 pm Post subject: Re: Automatic Transmission Shift Cable Boot |
|
|
seven-teen-fiddy
https://www.pelicanparts.com/More_Info/92242410300...GsQAvD_BwE _________________
gprudenciop wrote: |
my reason for switching to subaru is my german car was turning chinese so i said fuck it and went japanese....... |
Jake Raby wrote: |
Thanks for the correction. I used to be a nice guy, then I ruined it by exposing myself to the public. |
Brian wrote: |
Also the fact that people are agreeing with Skills, it's a turn of events for samba history |
|
|
Back to top |
|
|
djkeev Samba Moderator
Joined: September 30, 2007 Posts: 32634 Location: Reading Pennsylvania
|
|
Back to top |
|
|
skills@eurocarsplus Samba Peckerhead
Joined: January 01, 2007 Posts: 16883 Location: sticksville, ct.
|
Posted: Fri Mar 08, 2024 8:08 am Post subject: Re: Automatic Transmission Shift Cable Boot |
|
|
looks like it will have the range of motion we need on the automatic cable.
thankfully, mine was in nice shape but I was eyeballing this one just in case. I'd be willing to bet it's going to be dam close _________________
gprudenciop wrote: |
my reason for switching to subaru is my german car was turning chinese so i said fuck it and went japanese....... |
Jake Raby wrote: |
Thanks for the correction. I used to be a nice guy, then I ruined it by exposing myself to the public. |
Brian wrote: |
Also the fact that people are agreeing with Skills, it's a turn of events for samba history |
|
|
Back to top |
|
|
djkeev Samba Moderator
Joined: September 30, 2007 Posts: 32634 Location: Reading Pennsylvania
|
|
Back to top |
|
|
djkeev Samba Moderator
Joined: September 30, 2007 Posts: 32634 Location: Reading Pennsylvania
|
|
Back to top |
|
|
djkeev Samba Moderator
Joined: September 30, 2007 Posts: 32634 Location: Reading Pennsylvania
|
|
Back to top |
|
|
skills@eurocarsplus Samba Peckerhead
Joined: January 01, 2007 Posts: 16883 Location: sticksville, ct.
|
Posted: Sat Mar 09, 2024 5:23 pm Post subject: Re: Automatic Transmission Shift Cable Boot |
|
|
did you cancel the poor-shaa booty?
if you get it and don't want it I'll take it (obviously i'll pay for it) _________________
gprudenciop wrote: |
my reason for switching to subaru is my german car was turning chinese so i said fuck it and went japanese....... |
Jake Raby wrote: |
Thanks for the correction. I used to be a nice guy, then I ruined it by exposing myself to the public. |
Brian wrote: |
Also the fact that people are agreeing with Skills, it's a turn of events for samba history |
|
|
Back to top |
|
|
djkeev Samba Moderator
Joined: September 30, 2007 Posts: 32634 Location: Reading Pennsylvania
|
|
Back to top |
|
|
|