| Author |
Message |
plummerdesign
Samba Member
Joined: September 04, 2010
Posts: 540
Location: PNW
|
 Posted: Sun Dec 02, 2018 4:44 pm Post subject: WBX cylinder head block off plate source |
 |
|
hey all.
Sometimes things get lost during an engine build.
The new AMC heads came back machined and upgraded. But only now, 4 months later did I notice the steel block off plate (for the un-used water outlet) is missing.
Does anyone here know a ready source? I believe the bolts holes are are on 42mm centers.
It would be a better use of time to spend $7. on one than to fabricate.
Thanks for the assist : )
Jeffery
(photo sourced from another engine in the garage)
_________________
It is old and green and it makes me grin.
1984 Westfalia 1.9
Last edited by plummerdesign on Mon Dec 03, 2018 9:09 pm; edited 1 time in total |
|
| Back to top |
|
 |
Wildthings
Samba Member
Joined: March 13, 2005
Posts: 50348
|
| Posted: Sun Dec 02, 2018 10:19 pm Post subject: Re: WBX cylinder head block off plate source |
|
|
| If you have a vise, and drill motor, and a hacksaw you can make one in a half hour or so, that being less time than you are apt to spend trying to find one. |
|
| Back to top |
|
|
|
