Author |
Message |
madspaniard Samba Member
Joined: August 18, 2008 Posts: 3795 Location: Alameda, CA
|
Posted: Sun Jan 10, 2010 5:21 pm Post subject: |
|
|
Ouch! I didn't even look at the price. Agree, pretty expensive for such a tiny thing
tclark wrote: |
madspaniard wrote: |
If we can't figureout the part number I propose a group purchase sharing shipping costs. Who would be in? |
shipping is not bad $13 or so for mail
its the $35 for 1-3 way nozzle that kinda chokes me up
when you can get a set of 2 for $9 for most any jap/us vehicle
shipped for $1.99 from asia
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=280375069279 |
_________________ 1991 Westy auto w/ Peloquin TBD
"The only difference between me and a madman is that I'm not mad” - Salvador Dali |
|
Back to top |
|
|
BlackDogVan Samba Member
Joined: December 21, 2007 Posts: 855 Location: Vancouver Island
|
Posted: Sun Jan 10, 2010 8:20 pm Post subject: |
|
|
Yes that ebay link is them, they look like they belong to some construction equipment or farm tractor. Not small, but boy do they work great. To be honest I think putting both on would be way overkill. I put one on my drivers side & adjusted my new four nozzle system for nice coverage across both sides. They are ground down at the back to clear the body crease & have be ground on the inside to remove 2 of their four original plastic tangs. Like the OEM they are a one time use part, it'll be a vice grip job to remove like the original. Fit is good, I made a 1/32" rubber gasket for mine.
Installed pic link:
http://cgi.ebay.co.uk/VW-T3-T25-CAMPER-WINDSCREEN-...45ebcad6dc
Last edited by BlackDogVan on Mon Jan 11, 2010 12:15 am; edited 1 time in total |
|
Back to top |
|
|
Terry Kay Banned
Joined: June 22, 2003 Posts: 13331
|
Posted: Sun Jan 10, 2010 10:41 pm Post subject: |
|
|
By scaling the washer nozzle assembly to your finger's that gizmo looks as big as a ping pong ball, or a golf ball.
Is it on the pretty big size ???
Looks like a good idea, but mabe the Mopar two nozzle is a better idea if this is that large. _________________ T.K. |
|
Back to top |
|
|
BlackDogVan Samba Member
Joined: December 21, 2007 Posts: 855 Location: Vancouver Island
|
Posted: Mon Jan 11, 2010 12:26 am Post subject: |
|
|
TK my camera was in macro mode so they look big, not that they are mini tho.
The hyundai ones look promising, are they adjustable? Lots of car squirters fit but are made to fit to the hood, not the 45ish degree angle of the van bodywork so they squirt too high & are fixed in place anglewise. |
|
Back to top |
|
|
tclark Samba Member
Joined: November 21, 2005 Posts: 926
|
Posted: Mon Jan 11, 2010 11:41 am Post subject: |
|
|
taigagreen wrote: |
The three-jet washers are from the first-gen Smart Four-Two. |
Can any one confirm the part# that was known to work
Here in N.A. I called and had some confusion as to what a a 1st gen 4-2 is
They think you might be talking the diesel model
and the part# they came up with for that is 434860126//
but I search that number on some smart car parts site & no hit all
But called another smart guys & this part# does get a hit on a russian T3 site
0008830V002000000
http://fanclub-vw-bus.ru/forum/viewtopic.php?f=50&t=244&st=0&sk=t&sd=a&start=10
http://translate.google.ca/?sl=es&tl=en#ru|en|
Guys, help me find the original number of washer nozzles Smart ... Number (0008830V002000000) at which pictures are not original. In Ekziste not beat: kaktak:. Directory of smart in ekziste me odd does not work: bash: êàî Helpuyu, guys ))))))
any Russian speaker in the house ?? _________________ 89 Westy with TDI AHU 1.9 manual lots of mods
85 GL 1.9, auto (for sold)
Last edited by tclark on Thu Jan 14, 2010 12:41 pm; edited 7 times in total |
|
Back to top |
|
|
Franklinstower Samba Member
Joined: September 21, 2006 Posts: 1896 Location: PNW
|
Posted: Mon Jan 11, 2010 11:52 am Post subject: |
|
|
PDXWesty wrote: |
My 02 Nissan Pathfinder has 3-way sprayers. I wonder if they would work. |
I think a lot of the issues is the angle the nozzle must be at to hit the windshield. So standard passenger car nozzles don't have the angle to hit windshield. I would be checking rear nozzles like the ones on Volvo wagons. I also rememeber reading that some old rabbit rear nozzle would fit and spray at the correct angle.
Paul _________________ '89 Westy - EJ25/22 Frank 4.44 5mt
'75 Miami Blue Sunroof FI Standard Bug |
|
Back to top |
|
|
syncrodoka Samba Member
Joined: December 27, 2005 Posts: 12007 Location: Santa Cruz, CA
|
Posted: Mon Jan 11, 2010 9:08 pm Post subject: |
|
|
I ordered a Smart car washer jet from the dealer today. It will take 5 business days to get here and will see what I get |
|
Back to top |
|
|
1621 Samba Member
Joined: May 15, 2006 Posts: 2174
|
Posted: Mon Jan 11, 2010 10:11 pm Post subject: |
|
|
syncrodoka wrote: |
I ordered a Smart car washer jet from the dealer today. It will take 5 business days to get here and will see what I get |
Thanks for being the guinea pig on this one. _________________ '85 Westy |
|
Back to top |
|
|
syncrodoka Samba Member
Joined: December 27, 2005 Posts: 12007 Location: Santa Cruz, CA
|
Posted: Mon Jan 11, 2010 10:16 pm Post subject: |
|
|
I happen to have a front clip sitting here-from mid windshield to mid radiator so I can check fitment easily.
If it works- it was cheap
If it doesn't work- it was cheap |
|
Back to top |
|
|
r39o Samba Polizei
Joined: May 18, 2005 Posts: 9800 Location: San Diego
|
Posted: Tue Jan 12, 2010 1:20 pm Post subject: |
|
|
taigagreen wrote: |
Do you have the Smart car in the States? Made by Mercedes... The three-jet washers are from the first-gen Smart Four-Two. Cheaper to buy directly from the dealer I think.
Had a set of these on a previous syncro and the are simply excellent! |
What is the MERCEDES part number?
I buy direct from Mercedes, very cheap. BUT, I need the part number. I get a smoking deal as we have been buying from Mercedes for over 50 years.
What is the Mercedes part number?????? _________________ "Use the SEARCH, Luke" But first visit the Vanagon FAQ!
1990 Multivan EJ 22, Rancho trans 0.82 4th, Small Car front AC, CLKs w/ 215/65-16, homemade big brakes 303mm, Konis, Recaros, etc....
Click to see my ads for Cup holders, Subaru clutch fix and CLK wheels (no wheels currently) |
|
Back to top |
|
|
1621 Samba Member
Joined: May 15, 2006 Posts: 2174
|
Posted: Tue Jan 12, 2010 3:33 pm Post subject: |
|
|
r39o wrote: |
taigagreen wrote: |
Do you have the Smart car in the States? Made by Mercedes... The three-jet washers are from the first-gen Smart Four-Two. Cheaper to buy directly from the dealer I think.
Had a set of these on a previous syncro and the are simply excellent! |
What is the MERCEDES part number?
I buy direct from Mercedes, very cheap. BUT, I need the part number. I get a smoking deal as we have been buying from Mercedes for over 50 years.
What is the Mercedes part number?????? |
With such a great relationship with Mercedes, why don't you call and ask them?
Doubtful you're going to find out from posting here when the thread is only a few days old. _________________ '85 Westy |
|
Back to top |
|
|
a914622 Samba Member
Joined: July 29, 2004 Posts: 840 Location: Westend of HWY2 , Wash
|
Posted: Tue Jan 12, 2010 7:48 pm Post subject: |
|
|
Hey I know its not the 3 sprayer BUT I was looking around at the 80s toyota flat face vans and noticed there sprayers are extended out from the body about and inch AND its a 2 spray.
Has anyone used that on the vanagon??
jcl _________________ 87 gl powerd buy 2.5subaru
75 914 getting 2.2t subaru scratch that SVX subaru |
|
Back to top |
|
|
r39o Samba Polizei
Joined: May 18, 2005 Posts: 9800 Location: San Diego
|
Posted: Wed Jan 13, 2010 11:16 am Post subject: |
|
|
1621,
Usually the parts guys need a VIN or year or something more to go on. Model names and numbering are frequently different from what is generally talked about or posted and what the factory knows them as.
I have access to the Mercedes on line parts catalog (pig that it is.) I will poke around when I have a chance. Since I never deal with anything newer than 60s Mercedes, I do not know if the Smart cars are available in the catalog or not. We'll see.
-Walt _________________ "Use the SEARCH, Luke" But first visit the Vanagon FAQ!
1990 Multivan EJ 22, Rancho trans 0.82 4th, Small Car front AC, CLKs w/ 215/65-16, homemade big brakes 303mm, Konis, Recaros, etc....
Click to see my ads for Cup holders, Subaru clutch fix and CLK wheels (no wheels currently) |
|
Back to top |
|
|
camerahunter Samba Member
Joined: July 23, 2009 Posts: 567 Location: Tacoma
|
Posted: Wed Jan 13, 2010 11:27 am Post subject: |
|
|
Why not drill a couple more holes in the original ones?
My washer fluid comes out like a ROCKET so it would easily feed 2 more holes.
A small #60 twist drill bit in a hand drill would go right through and into the feed for the existing hole.
David _________________ 1984 - Daily driver |
|
Back to top |
|
|
r39o Samba Polizei
Joined: May 18, 2005 Posts: 9800 Location: San Diego
|
Posted: Wed Jan 13, 2010 3:21 pm Post subject: |
|
|
I can not seem to locate the Smart Car chassis in the Mercedes EPC (Startek.)
What is the chassis designation of the Smart Car?
Is it the A series 168, for example?
OR?????? _________________ "Use the SEARCH, Luke" But first visit the Vanagon FAQ!
1990 Multivan EJ 22, Rancho trans 0.82 4th, Small Car front AC, CLKs w/ 215/65-16, homemade big brakes 303mm, Konis, Recaros, etc....
Click to see my ads for Cup holders, Subaru clutch fix and CLK wheels (no wheels currently) |
|
Back to top |
|
|
r39o Samba Polizei
Joined: May 18, 2005 Posts: 9800 Location: San Diego
|
Posted: Wed Jan 13, 2010 6:10 pm Post subject: |
|
|
Turns out the Smart Car is a different company than Mercedes. There is NO on line access for parts except via a paid subscription. The dealer only has two logins, for example, which they pay for.
*IF* the part in question was available on a US version, then I can buy it. If it is from any other country, then it is likely a no go. Sigh....
So what's the part number?????? I can then see if they can get it. _________________ "Use the SEARCH, Luke" But first visit the Vanagon FAQ!
1990 Multivan EJ 22, Rancho trans 0.82 4th, Small Car front AC, CLKs w/ 215/65-16, homemade big brakes 303mm, Konis, Recaros, etc....
Click to see my ads for Cup holders, Subaru clutch fix and CLK wheels (no wheels currently) |
|
Back to top |
|
|
syncrodoka Samba Member
Joined: December 27, 2005 Posts: 12007 Location: Santa Cruz, CA
|
Posted: Wed Jan 13, 2010 6:15 pm Post subject: |
|
|
Be patient. If the ones that I am getting from the dealer work they are only ~$7. |
|
Back to top |
|
|
ZimZam Samba Member
Joined: July 21, 2005 Posts: 562 Location: Talkeetna, AK
|
Posted: Wed Jan 13, 2010 9:00 pm Post subject: |
|
|
syncrodoka wrote: |
Be patient. If the ones that I am getting from the dealer work they are only ~$7. |
Yea Man! Another project.
"See honey it only cost seven bucks."
"Nothing you put in that thing cost seven dollars. More like seven hundred."
"But look pumpkin. SynchroDoka says it right here on the Samba."
"That place is full of Bolshevik propaganda. His name even sounds East German." she said and rolled her eyes.
I guess I'll just have to squirrel away more of my lunch money. Fixing your van will make you skinny. _________________ '85 Cabriolet (Margo)
'87 Westy (Heidi)
'75 Porsche 911S Targa
"Nobody trusts anyone, or why did they put tilt on a pinball machine.”
- Steve McQueen
"It's just metal, when rusted and dented , anything you will do will be better. Stop being afraid. What they (VW) did many year ago is not better then what you will do now." -Ben |
|
Back to top |
|
|
1621 Samba Member
Joined: May 15, 2006 Posts: 2174
|
Posted: Wed Jan 13, 2010 9:11 pm Post subject: |
|
|
zimzam wrote: |
syncrodoka wrote: |
Be patient. If the ones that I am getting from the dealer work they are only ~$7. |
Yea Man! Another project.
"See honey it only cost seven bucks."
"Nothing you put in that thing cost seven dollars. More like seven hundred."
"But look pumpkin. SynchroDoka says it right here on the Samba."
"That place is full of Bolshevik propaganda. His name even sounds East German." she said and rolled her eyes.
I guess I'll just have to squirrel away more of my lunch money. Fixing your van will make you skinny. |
you made my milk come out my nose... _________________ '85 Westy |
|
Back to top |
|
|
r39o Samba Polizei
Joined: May 18, 2005 Posts: 9800 Location: San Diego
|
Posted: Wed Jan 13, 2010 11:06 pm Post subject: |
|
|
A recent post from the other side of the world from us USA centric types shows a viable option (with part number!)
http://forum.club8090.co.uk/viewtopic.php?p=7316859&sid=077fe56a73e0afa052d70e2e3a9f6f40
Are there any Peugeot dealers in the US or Canada?????
Didn't they ban those cars along with Yugos over here??? _________________ "Use the SEARCH, Luke" But first visit the Vanagon FAQ!
1990 Multivan EJ 22, Rancho trans 0.82 4th, Small Car front AC, CLKs w/ 215/65-16, homemade big brakes 303mm, Konis, Recaros, etc....
Click to see my ads for Cup holders, Subaru clutch fix and CLK wheels (no wheels currently) |
|
Back to top |
|
|
|