| Author |
Message |
Paul Windisch
Samba Member
Joined: September 02, 2009
Posts: 2546
Location: Clinton Township, Michigan
|
 Posted: Fri Jun 04, 2010 11:12 am Post subject: Regulator Terminals |
 |
|
I searched, but only came up with the normal (smaller) size female spades. Does anyone know where to get the larger female spades that attach the battery and generator wires to the voltage regulator?
Thanks
Paul
_________________
*ASE Recertified Master Automotive Tech*
1984 Mexican Beetle
-1914cc
-L3 Heads 35x32 valves 52cc chambers
-0.040" deck for about 9.1:1 Compression
-Engle W110 cam
-CB Super Stock 1.1:1 Rockers
-Stock Heat Exchangers w/ Tri-Mil Muffler
-Dual Weber IDF 40s w/ 26mm venturis
-034 SVDA Distributor
2013 Chevrolet Volt DD
2005 Pontiac Montana SV6
MAHLE Service Solutions
Applications Engineer |
|
| Back to top |
|
 |
mr_bill
Samba Member
Joined: February 19, 2006
Posts: 1008
Location: City of Orange, CA
|
|
| Back to top |
|
|
Paul Windisch
Samba Member
Joined: September 02, 2009
Posts: 2546
Location: Clinton Township, Michigan
|
| Posted: Fri Jun 04, 2010 3:21 pm Post subject: |
|
|
NAPA sells the good brass ones?
_________________
*ASE Recertified Master Automotive Tech*
1984 Mexican Beetle
-1914cc
-L3 Heads 35x32 valves 52cc chambers
-0.040" deck for about 9.1:1 Compression
-Engle W110 cam
-CB Super Stock 1.1:1 Rockers
-Stock Heat Exchangers w/ Tri-Mil Muffler
-Dual Weber IDF 40s w/ 26mm venturis
-034 SVDA Distributor
2013 Chevrolet Volt DD
2005 Pontiac Montana SV6
MAHLE Service Solutions
Applications Engineer |
|
| Back to top |
|
|
Eric&Barb
Samba Member
Joined: September 19, 2004
Posts: 24733
Location: Olympia Wash Rinse & Repeat
|
|
| Back to top |
|
|
Paul Windisch
Samba Member
Joined: September 02, 2009
Posts: 2546
Location: Clinton Township, Michigan
|
| Posted: Fri Jun 04, 2010 8:31 pm Post subject: |
|
|
Thanks!
That was quite an interesting read. I will pm Viande now...
_________________
*ASE Recertified Master Automotive Tech*
1984 Mexican Beetle
-1914cc
-L3 Heads 35x32 valves 52cc chambers
-0.040" deck for about 9.1:1 Compression
-Engle W110 cam
-CB Super Stock 1.1:1 Rockers
-Stock Heat Exchangers w/ Tri-Mil Muffler
-Dual Weber IDF 40s w/ 26mm venturis
-034 SVDA Distributor
2013 Chevrolet Volt DD
2005 Pontiac Montana SV6
MAHLE Service Solutions
Applications Engineer |
|
| Back to top |
|
|
Eric&Barb
Samba Member
Joined: September 19, 2004
Posts: 24733
Location: Olympia Wash Rinse & Repeat
|
| Posted: Fri Jun 04, 2010 8:42 pm Post subject: |
|
|
Glad to help!
We need to get some of those large terminals also......
_________________
In Stereo, Where Available! |
|
| Back to top |
|
|
Paul Windisch
Samba Member
Joined: September 02, 2009
Posts: 2546
Location: Clinton Township, Michigan
|
| Posted: Fri Jun 04, 2010 9:05 pm Post subject: |
|
|
Yeah, I recently figured out why sometimes my generator charged, and sometimes my battery charger charged... 
_________________
*ASE Recertified Master Automotive Tech*
1984 Mexican Beetle
-1914cc
-L3 Heads 35x32 valves 52cc chambers
-0.040" deck for about 9.1:1 Compression
-Engle W110 cam
-CB Super Stock 1.1:1 Rockers
-Stock Heat Exchangers w/ Tri-Mil Muffler
-Dual Weber IDF 40s w/ 26mm venturis
-034 SVDA Distributor
2013 Chevrolet Volt DD
2005 Pontiac Montana SV6
MAHLE Service Solutions
Applications Engineer |
|
| Back to top |
|
|
Bruce Amacker
Samba Member
Joined: December 26, 2007
Posts: 1786
Location: Cleveland, Ohio
|
|
| Back to top |
|
|
|
