Author |
Message |
MrTibbs Samba Member
Joined: January 16, 2014 Posts: 68 Location: Austin TX
|
Posted: Mon Oct 25, 2021 11:28 am Post subject: Re: Fix that Poptop push bar! |
|
|
I recently utilized the parts from www.werk-4.com to fix my crossbar as well.
Glad I finally got around to the task. By the end of the summer, the pop-top was getting noticeably more difficult to raise and lower...This was exacerbated when carrying a cargo box on the roof, even with lift-assist struts.
Now with the ball bearing-based fix, everything is silky smooth and likely better than when it rolled off the assembly line.
Overall a great piece of kit, straightforward install. |
|
Back to top |
|
|
kguarnotta Samba Member
Joined: April 01, 2004 Posts: 1160 Location: Woodstock, NH
|
Posted: Tue Nov 30, 2021 4:26 am Post subject: Re: Fix that Poptop push bar! |
|
|
For those with bad bars - I just saw the GoWEsty is selling repro bars, with thicker steel -
https://www.gowesty.com/product/gas-struts-for-lif...anagon-?v= _________________ -Kevin
Lincoln, MA
'86 Triple Knob Syncro w/EJ22
'78 Westy
'69 Single Cab
'65 Kombi - EZ-Camper |
|
Back to top |
|
|
Ahwahnee Samba Member
Joined: June 05, 2010 Posts: 9810 Location: Mt Lemmon, AZ
|
Posted: Tue Nov 30, 2021 10:35 am Post subject: Re: Fix that Poptop push bar! |
|
|
Nice... and a pretty fair price too I think.
For less than 50 bucks I probably wouldn't have gone to such lengths to repair and improve mine. |
|
Back to top |
|
|
VdubVanner Samba Member
Joined: August 03, 2017 Posts: 734 Location: Cowtown AB
|
Posted: Wed Dec 01, 2021 8:55 am Post subject: Re: Fix that Poptop push bar! |
|
|
Don't forget the install video that comes with that new bar:
Link
_________________ "Fritz", a temperamental and unforgiving 1989 Westy that proudly bears his German flags and status as a member of the exclusive GoWesty Belly Flop Club.
1989 Westy Makeover: GoWesty 2.3L Engine plus plus plus https://www.thesamba.com/vw/forum/viewtopic.php?t=...mp;start=0 |
|
Back to top |
|
|
Kejidog Samba Member
Joined: July 26, 2011 Posts: 92 Location: Nova Scotia
|
Posted: Wed Dec 01, 2021 4:40 pm Post subject: Re: Fix that Poptop push bar! |
|
|
It never fails. I end up bashing my knuckles burning my fingers and entertaining my neighbors with some new colourful language only to find Gowesty has made a part to fix this in 4 minutes or less. Oh the humanity!!
I am surprised they never addressed the guillotine that cuts the bar with repeated openings. The welded washers are the rear end of the feline for sure.
One thing that impressed me was using the socket and a clamp to force the snap rings on. If i would have known that from the start i would have been more careful with mine. _________________ 85 Westy Camper "Jeebus"
"new" rebuilt 2.1 with a ten cent stainless exhaust- lovin all the power!!!! |
|
Back to top |
|
|
vanis13 Samba Member
Joined: August 15, 2010 Posts: 3100 Location: ABQ NM USA.... Except when not
|
Posted: Wed Dec 01, 2021 6:44 pm Post subject: Re: Fix that Poptop push bar! |
|
|
nice install video and nice that the bar is thicker
BUT it does not solve the cut-though problem it'll just take longer to cut through. the various bushings (above in this thread) on the round/cutting part of the spring section is where the real solution is. _________________ 83.5 Westy with Subaru 2.5, 4 spd manual, center seat, COLD A/C on 134a!, Winter camp heated with an Espar B4 gasoline furnace
www.SuperVanagon.com - some stuff I make |
|
Back to top |
|
|
|