Author |
Message |
[email protected] Samba Member
Joined: July 23, 2002 Posts: 38
|
Posted: Wed Jul 31, 2002 9:38 pm Post subject: lowering |
|
|
whats the best and cheapest way to lower the front end on a 71 bug??? i have ideas but just want other opinions... |
|
Back to top |
|
|
IndianaVWKid Samba Member
Joined: January 29, 2002 Posts: 356
|
Posted: Wed Jul 31, 2002 10:40 pm Post subject: lowering |
|
|
Well, as stated in the question below. The Spindles are best...(and most expensive) But the beam is second best....Never try to remove any leaves out of the torsion arms...it's dangerous. check the question below yours for more info. |
|
Back to top |
|
|
thayer Samba Member
Joined: July 04, 2002 Posts: 168 Location: Tempe, Az
|
Posted: Thu Aug 01, 2002 3:38 pm Post subject: lowering |
|
|
I'll second that.. I bought a 65 beetle from SOCAL that had leaves taken out of the top portion of the beam and my car rides like a tank. As one of my good friends put it "it's like driving a mechanical bull down the road"
I'm switching to spindles and a beam. |
|
Back to top |
|
|
1969 beetle Samba Member
Joined: June 05, 2002 Posts: 62 Location: Atlanta, Ga
|
Posted: Sun Aug 04, 2002 4:38 pm Post subject: lowering |
|
|
ahh don't mess up a beetle by lowering it, keep it original. |
|
Back to top |
|
|
mixedup59 Samba Member
Joined: August 07, 2002 Posts: 704 Location: Tacoma Washington
|
Posted: Wed Aug 07, 2002 11:24 pm Post subject: lowering |
|
|
What up bignatedogg, if it's a superbeetle (71), check out pacific customs modified struts and inserts. It's basically your strut cut down a few inches and a rabbit strut insert but theirs are adjustabe. Plus, use your own springs. We've used em on a few different cars and they ride better than stock. You'll need a 135 or 145 size tire in the front though so it won't rub. If it's a standard beetle with a beam and all that, get the dropped spindles from CB performance. I got those on my vert and they make the ride nice. Peace
Tony
The Volks Shop |
|
Back to top |
|
|
[email protected] Samba Member
Joined: July 25, 2002 Posts: 20
|
Posted: Tue Aug 13, 2002 3:15 pm Post subject: lowering |
|
|
Tony? Volks shop in Tacoma? If so, I've seen your vert.... nice.. if not, I'm sure yours is nice too.. |
|
Back to top |
|
|
|