Fuel Injection Lines In vs Out

[mtsipe]

I am in the process of connecting fuel injection fuel lines from my motor to the steel lines going to the tank.

My question is which steel line is the "In" vs the "Out"(return to tank)?

I neglected to label which one is which (top vs bottom) when I removed them.

Thanks

[okubricko]

I'm no expert in the stock fuel injection lines, but would ask if one is bigger than the other? Usually the larger line flows to the injectors and the smaller line is the return line.

[bluebus86]

[KKiley]

I thought that Dwayne had posted a pic. Here ya go

_________________
1978 Super Beetle convertible

Click to view image

[mtsipe]

[mtsipe]

Or right or left? I wish I had a picture but will take one once I get home

[busdaddy]

The line that emerges from the LH frame horn is the feed, the pump connects to it at the front, the return line is in the RH horn and goes directly to the tank. Have a helper blow on one line at the back while you identify which line is blowing up front.
_________________
Rust NEVER sleeps and stock never goes out of style.

Please don't PM technical questions, ask your problem in public so everyone can play along. If you think it's too stupid post it here
Stop dead photo links! Post your photos to The Samba Gallery!

Слава Україні!

[KKiley]

Just stick a wire up in them. The return line dumps into the tank. The feed line bends to pick up gas at the bottom. If you wire goes all the way in, that is the return line.
Simple.
Kevin
_________________
1978 Super Beetle convertible

Click to view image