Author |
Message |
glutamodo The Android
Joined: July 13, 2004 Posts: 26325 Location: Douglas, WY
|
Posted: Wed Sep 18, 2019 8:44 am Post subject: Re: 1962 Beetle heater hose routing |
|
|
Stale air actually gives pretty good airflow, it's basically all of the engine cooling air directed into the heater, it just doesn't smell that great. And since I no longer have a sense of smell, I really don't care!
Yes, bopping around town you don't get whole lot of benefit from those rear seat outlets. But on the freeway it's Okay. I once gave a lift to a chick who took off her wet shoes and put them behind the front seat. 170 miles on the interstate later... those shoes were more than dried out, they no longer fit, because they had shrank! _________________ Andy T.
IMAGE NOTE: It has been noted that Chrome based browsers may have issues in displaying my vast image library, which use non-secure links and are on an FTP server. Images should still be viewable if the link is clicked though.
I do not know how to fix this. All I can say is it all works fine for me with what I use, Firefox. |
|
Back to top |
|
|
CNsylvester Samba Member
Joined: June 13, 2016 Posts: 47 Location: Australia
|
Posted: Mon May 14, 2018 2:33 am Post subject: Re: 1962 Beetle heater hose routing |
|
|
My May 1962 Australian built beetle has a stock rear heater set up.
The outlet for the rear is on the RHS (Drivers Side here of course see photo below).
I drive my bug each Saturday night. I always turn the heater on/off during the trip - purely for effect and know that its working.
Last Saturday night I reached back seat feet area. I could .... just .... feel some warmth coming through the two rear slots. Nothing to write home about.
At the same time (and with the front floor vents closed) I rated the force of the warmth being delivered via the two front windscreen vents and the left hand side was outperforming the right by 50%.
Now I've seen this post, and scrutinized my heaters & outlets, seems I have some adjusting to do.
Here are some photos of my set up which I believe is stock/original.
|
|
Back to top |
|
|
HippyTom Samba Member
Joined: December 18, 2013 Posts: 676 Location: Florida, West Pasco
|
Posted: Tue Dec 26, 2017 6:37 am Post subject: Re: 1962 Beetle heater hose routing |
|
|
I've got the original kick panels in my 62. I could make you a pair of templates out of cardboard and mail them to you. I have my original brackets but not installed after new pans. You could easily make a set out of 1/8" plywood and cover with vinyl. I could take measurements and pics of the brackets to make a set. I intend to keep mine but I have all the heat going to the front so not using. Knowing they are 1 year only, I had them media blasted and preserved in case I decide to put heat in the back. Let me know if you want templates and info.
Tom |
|
Back to top |
|
|
VOLKSWAGNUT Fastest VW Belt Changer
Joined: October 14, 2007 Posts: 11056 Location: Flippin' a Belt........ .... Off-n-On ... NC USA
|
Posted: Wed Dec 20, 2017 1:41 pm Post subject: Re: 1962 Beetle heater hose routing |
|
|
Hmmm..
I had no problem getting a $100 out of pair
They were nicer though..
Using them is IMO the easiest way to spot the proper floor ring position
Dont like a price.. dont pay.. Its that simple
You can't run down to the VW dealer or Chinamart and get them.. and I doubt anyone can shit them..so.... buy some or make some.. I was simply just passing them along..
Making a pair.. one could position the rings in the panels and on the floor in position to match.... even if they are not in the EXACT to the MM VW location..
Whine on
. _________________ aka Ken {o\!/o}
Its your vehicle- stop askin' for approval-do what YOU like for cryin' out loud
Better to roll em' how you want and wear em' out-than lettin' em' rot out
Its about the going not the showing
Rebuilt to drive not decorate
WANTED: Local Eatin' Joints, Triple D for TheSamba contributions here http://www.thesamba.com/vw/forum/viewtopic.php?t=570510
Search "VOLKSWAGNUT" on YouTube since you cant watch a "certain" BELT change video round here
Usually and often edited |
|
Back to top |
|
|
glutamodo The Android
Joined: July 13, 2004 Posts: 26325 Location: Douglas, WY
|
Posted: Wed Dec 20, 2017 12:55 pm Post subject: Re: 1962 Beetle heater hose routing |
|
|
Ouch, yeah, kind of pricey especially with one of them looking a bit buggered up around the heater outlet. _________________ Andy T.
IMAGE NOTE: It has been noted that Chrome based browsers may have issues in displaying my vast image library, which use non-secure links and are on an FTP server. Images should still be viewable if the link is clicked though.
I do not know how to fix this. All I can say is it all works fine for me with what I use, Firefox. |
|
Back to top |
|
|
thomas. Samba Member
Joined: July 31, 2010 Posts: 1291 Location: South West (Pa.)
|
Posted: Wed Dec 20, 2017 9:45 am Post subject: Re: 1962 Beetle heater hose routing |
|
|
Looks like a candidate for the whine topics at that price. |
|
Back to top |
|
|
VOLKSWAGNUT Fastest VW Belt Changer
Joined: October 14, 2007 Posts: 11056 Location: Flippin' a Belt........ .... Off-n-On ... NC USA
|
Posted: Tue Dec 19, 2017 9:17 am Post subject: Re: 1962 Beetle heater hose routing |
|
|
thekera wrote: |
I thought of that, but I'm still looking for a set of the kick panels. I have the brackets, ducting just not the kick plates. |
Jump on em' ..
https://www.thesamba.com/vw/classifieds/detail.php?id=2028317
. _________________ aka Ken {o\!/o}
Its your vehicle- stop askin' for approval-do what YOU like for cryin' out loud
Better to roll em' how you want and wear em' out-than lettin' em' rot out
Its about the going not the showing
Rebuilt to drive not decorate
WANTED: Local Eatin' Joints, Triple D for TheSamba contributions here http://www.thesamba.com/vw/forum/viewtopic.php?t=570510
Search "VOLKSWAGNUT" on YouTube since you cant watch a "certain" BELT change video round here
Usually and often edited |
|
Back to top |
|
|
thekera Samba Member
Joined: March 20, 2011 Posts: 399 Location: WA
|
Posted: Tue Dec 19, 2017 9:14 am Post subject: Re: 1962 Beetle heater hose routing |
|
|
I thought of that, but I'm still looking for a set of the kick panels. I have the brackets, ducting just not the kick plates. _________________ 1961 Type 1
1962 Euro ragtop
1963 Type 1
1966 Type 1
1979 Mk1 early westy 2dr
2013 Mk6 2dr
ANYTHING AND EVERYTHING VW METAL FAB.
NOS PANELS: WANTED
GOT RUST? |
|
Back to top |
|
|
VOLKSWAGNUT Fastest VW Belt Changer
Joined: October 14, 2007 Posts: 11056 Location: Flippin' a Belt........ .... Off-n-On ... NC USA
|
Posted: Tue Dec 19, 2017 9:10 am Post subject: Re: 1962 Beetle heater hose routing |
|
|
Use the 62 rear floor kick panels as the placement guide.. .
. _________________ aka Ken {o\!/o}
Its your vehicle- stop askin' for approval-do what YOU like for cryin' out loud
Better to roll em' how you want and wear em' out-than lettin' em' rot out
Its about the going not the showing
Rebuilt to drive not decorate
WANTED: Local Eatin' Joints, Triple D for TheSamba contributions here http://www.thesamba.com/vw/forum/viewtopic.php?t=570510
Search "VOLKSWAGNUT" on YouTube since you cant watch a "certain" BELT change video round here
Usually and often edited |
|
Back to top |
|
|
thekera Samba Member
Joined: March 20, 2011 Posts: 399 Location: WA
|
Posted: Tue Dec 19, 2017 4:07 am Post subject: Re: 1962 Beetle heater hose routing |
|
|
Hi
I been in the process of restoring my 1962 rag pan. I have a set of the 1962 only brackets that are to be installed on the pan.
I read the bulletin literature on the previous page, which gives a vague location of the brackets in relation to the pan. I would like to weld these brackets in, but im not confident with there exact location?
Could someone point me in the right direction? A three point location would be great? Or if someone knows a insert or section in the Bentley Manual?
Thanks _________________ 1961 Type 1
1962 Euro ragtop
1963 Type 1
1966 Type 1
1979 Mk1 early westy 2dr
2013 Mk6 2dr
ANYTHING AND EVERYTHING VW METAL FAB.
NOS PANELS: WANTED
GOT RUST? |
|
Back to top |
|
|
79SuperVert Samba Member
Joined: May 31, 2002 Posts: 9758 Location: Elizabeth, NJ & La Isla Del Encanto
|
Posted: Tue Feb 21, 2017 8:55 pm Post subject: Re: 1962 Beetle heater hose routing |
|
|
These little transition pieces that fit the round hose end to the oblong outlet opening would be awesome to find...they are missing from my setup. I guess I can use this pic as a template to make something out of cardboard or felt.
_________________ Central Jersey VW Society
Wanted: Art Collins VW (Savannah, Georgia) items - license plate surrounds and other items. Also ivory "AM", "FM" and "SW" buttons for a US Blaupunkt Frankfurt. |
|
Back to top |
|
|
VEE DUB BOYS Samba Member
Joined: August 30, 2011 Posts: 146 Location: Greenville, SC
|
|
Back to top |
|
|
Allan Buc Samba Member
Joined: January 14, 2014 Posts: 35 Location: France
|
Posted: Thu Mar 31, 2016 4:50 am Post subject: Re: 1962 Beetle heater hose routing |
|
|
Thank you for you help Andy. |
|
Back to top |
|
|
glutamodo The Android
Joined: July 13, 2004 Posts: 26325 Location: Douglas, WY
|
Posted: Wed Mar 30, 2016 1:23 am Post subject: Re: 1962 Beetle heater hose routing |
|
|
Okay, when you mention what year your car is, please use the Model Year, or at least say when it was made.
Well, you won't find those for sale new anywhere. Look in scrapyards, and post a WTB (Wanting To Buy) advertisement in theSamba Classifieds or try the classified ads over on the VZi site that's out of England. _________________ Andy T.
IMAGE NOTE: It has been noted that Chrome based browsers may have issues in displaying my vast image library, which use non-secure links and are on an FTP server. Images should still be viewable if the link is clicked though.
I do not know how to fix this. All I can say is it all works fine for me with what I use, Firefox. |
|
Back to top |
|
|
Allan Buc Samba Member
Joined: January 14, 2014 Posts: 35 Location: France
|
Posted: Tue Mar 29, 2016 11:07 pm Post subject: Re: 1962 Beetle heater hose routing |
|
|
My Bug model 62 from November 1961.
I do not find these parts for my car.
Thanks |
|
Back to top |
|
|
glutamodo The Android
Joined: July 13, 2004 Posts: 26325 Location: Douglas, WY
|
Posted: Tue Mar 29, 2016 2:33 am Post subject: Re: 1962 Beetle heater hose routing |
|
|
Is this a 1961 Model Year beetle? If so, those were not used. They only started in August 1961 for Model Year 1962 and lasted to mid December 1962 (so the first third or so of Model Year 63) _________________ Andy T.
IMAGE NOTE: It has been noted that Chrome based browsers may have issues in displaying my vast image library, which use non-secure links and are on an FTP server. Images should still be viewable if the link is clicked though.
I do not know how to fix this. All I can say is it all works fine for me with what I use, Firefox. |
|
Back to top |
|
|
Allan Buc Samba Member
Joined: January 14, 2014 Posts: 35 Location: France
|
Posted: Tue Mar 29, 2016 2:02 am Post subject: Re: 1962 Beetle heater hose routing |
|
|
Need help on my 61 Convertible!
I search the two piece welded to the frame.
mine have been cut in the past
See photograph
|
|
Back to top |
|
|
62ItalianRagtop Samba Member
Joined: August 18, 2007 Posts: 1354 Location: Italy
|
Posted: Thu Dec 17, 2015 11:58 pm Post subject: Re: 1962 Beetle heater hose routing |
|
|
Thank you ... I don't see any for sale on thesamba ...
Which can be a fair price in oyur opinion ?
Thank you _________________ LOOKING FOR 62 ENGINE WITH NUMBER FROM 6.904.xxx TO 6.915.xxx
http://tettodistraccio.blogspot.com/ |
|
Back to top |
|
|
glutamodo The Android
Joined: July 13, 2004 Posts: 26325 Location: Douglas, WY
|
Posted: Thu Dec 17, 2015 5:16 pm Post subject: Re: 1962 Beetle heater hose routing |
|
|
VOLKSWAGNUT wrote: |
Id say maybe Medium Rare...
Seriously though.. You just dont find the rigid style tubing often..
In all my 62-63 Beetle and salvage hunting experiences I've never found one that had them.
Never knew they existed until this topic.
. |
Me neither. I'd call it bloody rare, myself.! _________________ Andy T.
IMAGE NOTE: It has been noted that Chrome based browsers may have issues in displaying my vast image library, which use non-secure links and are on an FTP server. Images should still be viewable if the link is clicked though.
I do not know how to fix this. All I can say is it all works fine for me with what I use, Firefox. |
|
Back to top |
|
|
VOLKSWAGNUT Fastest VW Belt Changer
Joined: October 14, 2007 Posts: 11056 Location: Flippin' a Belt........ .... Off-n-On ... NC USA
|
Posted: Thu Dec 17, 2015 4:11 pm Post subject: Re: 1962 Beetle heater hose routing |
|
|
62ItalianRagtop wrote: |
Hi, how much are rare these ? I have the hard type |
Id say maybe Medium Rare...
Seriously though.. You just dont find the rigid style tubing often..
In all my 62-63 Beetle and salvage hunting experiences I've never found one that had them.
Never knew they existed until this topic.
. _________________ aka Ken {o\!/o}
Its your vehicle- stop askin' for approval-do what YOU like for cryin' out loud
Better to roll em' how you want and wear em' out-than lettin' em' rot out
Its about the going not the showing
Rebuilt to drive not decorate
WANTED: Local Eatin' Joints, Triple D for TheSamba contributions here http://www.thesamba.com/vw/forum/viewtopic.php?t=570510
Search "VOLKSWAGNUT" on YouTube since you cant watch a "certain" BELT change video round here
Usually and often edited |
|
Back to top |
|
|
|