Electronic ignition/tach issue

[Mudboger07]

Hey guys I just installed a 009 distributor with accu fire electronic ignition in my 1600 vw and now the tach that worked before when I ran point ignition no longer works, is there something I'm doing wrong ?

[Dale M.]

Check your wiring.... Changing to electronic module should not have effected how tachometer performs....

Dale
_________________
“Fear The Government That Wants To Take Your Guns" - Thomas Jefferson.

"Kellison Sand Piper Roadster" For Street & Show.
"Joe Pody Sandrover" Buggy with 2180 for Autocross (Sold)
============================================================
All suggestions and advice are purely my own opinion. You are free to ignore them if you wish ...

[Mudboger07]

Thanks dale , I'll check the wiring, I did also change the coil and ended up have to use a external resistor , I'll double check that the tach wire is pluged into the neg side of the coil like I had it before