Author |
Message |
agon.parts Samba Member
Joined: August 21, 2010 Posts: 273 Location: Central Coast, CA
|
Posted: Thu Sep 10, 2020 4:56 pm Post subject: Front Heater Box Interior Dimensions |
|
|
Hello TheSamba,
Does anyone know what the front heater box interior dimensions are?
I've found the dimensions of the actual heater core, however, I know that some adhesive foam is used to fill in the gaps around it. I'd like to know the overall dimensions.
Quoted from: New front heater core, $50.
Christopher Schimke wrote: |
The dimensions of the Vanagon front heater core are:
17-1/4" (including end tanks, but not including inlet/outlet tubes) x 6-3/16" x 1-15/16" - 5/8" inlet/outlet
That length above is the actual overall length, but I am pretty sure that the dimensions listed on that site are the actual core dimensions, so the end tanks are not taken into consideration nor are the inlet/outlet tubes. |
Thanks! _________________ Forrest Walker Whitmore
AGON
FREEBIES: https://1drv.ms/u/s!AkqzgREEtE9Aj7poRLxLuW-oGORuiQ?e=eSKThT |
|
Back to top |
|
|
agon.parts Samba Member
Joined: August 21, 2010 Posts: 273 Location: Central Coast, CA
|
|
Back to top |
|
|
jlrftype7 Samba Member
Joined: July 24, 2018 Posts: 3577 Location: Chicago
|
Posted: Fri Sep 11, 2020 1:47 pm Post subject: Re: Front Heater Box Interior Dimensions |
|
|
Didn't measure my heater box when I had it apart earlier this year, but can tell you the core is not a sloppy fit inside the box section where it resides.
Not that much foam around the sides of the core either, maybe 1/4" thick on either end of the long measurement of the core. I used the one from Van Cafe.
What is your plan, different core or other heater box mod.? _________________ '68 Westy- my first VW and vehicle/Bus- long gone.- sold it to a traveling Swiss couple....
'67 Type 3 Fastback, my 2nd car- gone
'69 Semi-Auto Stick Shift Beetle-gone
2017 MINI Coopers, our current DDs
‘84 Tin Top - Hilga....Auto |
|
Back to top |
|
|
agon.parts Samba Member
Joined: August 21, 2010 Posts: 273 Location: Central Coast, CA
|
Posted: Fri Sep 11, 2020 2:13 pm Post subject: Re: Front Heater Box Interior Dimensions |
|
|
jlrftype7 wrote: |
Didn't measure my heater box when I had it apart earlier this year, but can tell you the core is not a sloppy fit inside the box section where it resides.
Not that much foam around the sides of the core either, maybe 1/4" thick on either end of the long measurement of the core. I used the one from Van Cafe.
What is your plan, different core or other heater box mod.? |
Thanks for the info - that helps. I'm retrofitting an A/C evaporator and a smaller heater core. _________________ Forrest Walker Whitmore
AGON
FREEBIES: https://1drv.ms/u/s!AkqzgREEtE9Aj7poRLxLuW-oGORuiQ?e=eSKThT |
|
Back to top |
|
|
|