I made a wall clock out of Type 3 parts

[DONGKG]

I made this wall clock out of Type 3 parts. I am just sharing this to everyone.

Thanks

The donor parts:

The brackets that holds the parts together:

The donor clock:

I was trying the bracket to fit well on the Type 3 pulley:

With some Type 3 parts in place:

Applying paint on this one:

With the Type 3 headlight lens:

Finished one beautifully hanged on the wall of our dining area:

I may have added this Type 2 VW logo, nevertheless, it artistically serves its purpose:

Thanks so much

Dong
_________________
'67 KG Cabrio (Mickey) ;
'66 Type 3 (Sharky 2)
'72 Type 2 Homey
'67 Splitty Bus
'65 beetle;'69 Country Buggy; '44 Kubelwagen (replica) TOOB MEMBER #20

[Mike Fisher]

Very Creative. I like it!
_________________
https://imgur.com/user/FisherSquareback/posts
69 FI/AT square Daily Driver
66 sunroof,67,70,71,71,71AT,72,72AT,73 Parts
two 57 oval ragtops sold
'68 Karmann Ghia sold

Society is like stew. If you don't keep it stirred up you end up with a lot of scum on the top! - Russ_Wolfe/Edward Abbey

[ALLWAGONS]

It must be '64 and later, because it doesn't have red needles. Nice Work!
_________________
I'd be UNSTOPPABLE if not for Law Enforcement and PHYSICS.

I recycle old cars and parts, other than when I rot, that's as Green as I am going to get.

Thanks to my Tesla driving neighbors, I feel more relaxed driving my SUBURBAN and old VW's.

NON INFLUENCER APPROVED

[supaninja]

friggin awesome! Does it keep better time then the stock clocks?
_________________
http://i5.photobucket.com/albums/y163/chucky1974/ninja.gif

Nick
Megasquirted Type 4 powered Notch http://www.thesamba.com/vw/forum/viewtopic.php?t=427890&postdays=0&postorder=asc&start=0
Blog of Doom http://supaninjanick.wordpress.com/

[DONGKG]

Thanks a lot, guys. I used an ordinary wall clock that can be bought at home depot and dismantled the same and get only those essential parts.

I did not use the stock clock of a Type 3...

Again, thanks a lot..

Wazup, Mike?
_________________
'67 KG Cabrio (Mickey) ;
'66 Type 3 (Sharky 2)
'72 Type 2 Homey
'67 Splitty Bus
'65 beetle;'69 Country Buggy; '44 Kubelwagen (replica) TOOB MEMBER #20

[presidential]

Much cooler than the clock I made for my brother out of a T3 hubcap.
_________________
~Craig
2007 Husky Sled dog

[DONGKG]

[presidential]

Craft stores sell the clock parts kits, just so you know for next time. However, all of the ones I came across had ye olde tymee hands, so I can see why you pirated all of that stuff out of an existing clock.

Good work, inspiring to say the least!
_________________
~Craig
2007 Husky Sled dog

[DONGKG]