| Author |
Message |
raru
Samba Member
Joined: April 16, 2002
Posts: 307
Location: Bay Area, Califaztlan
|
 Posted: Fri May 17, 2002 4:22 pm Post subject: welding |
 |
|
Like most, my 65 kombi is in need of some welding for repair. Is there anyone in the SF Bay who does it on the side who wouldn't mind some business? or can anybody recommend a reasonable shop? My skills with a torch are limited to that steel cube in shop class. Thanks.
Raul |
|
| Back to top |
|
 |
ripplewaver.com
Samba Member
Joined: April 30, 2002
Posts: 61
|
| Posted: Sun May 19, 2002 11:07 pm Post subject: welding |
|
|
What do you have to weld? I am in the SF Bay area, which city are you in? You can see some of the work I have done on my bus at
www.ripplewaver.com
Just click on the Bus Site link. Thanks
Mike
'67 Bus |
|
| Back to top |
|
|
raru
Samba Member
Joined: April 16, 2002
Posts: 307
Location: Bay Area, Califaztlan
|
| Posted: Thu May 30, 2002 10:29 am Post subject: welding |
|
|
I was on vacation, sorry for the late response. Hope you don't mind me emailing directly to the address off your site. Nice site by the way.
There are four (4) areas of concern I have (I'm sure there will be others as I get further into the project).
1) Bulkhead wall for bench seat bus. Somebody tried making the bus into a walk-through. (I have replacement section)
2) Roof section near rear hatch hinge area. Interior gutter in same area. (I Have replacement section)
3) Luggage area floor section. Similar to the work shown on your site. Aprox. 18"x18" section.(Don't have replacement section yet)
4) Bottom area of front clip. (Don't have replacement section yet)
I can send pictures of the areas in question to give you a better idea. I'll be looking for the other sections when I go down to the Classic next weekend.
I appreciate any help.
Raul |
|
| Back to top |
|
|
|
