Author |
Message |
Ratt Samba Member
Joined: April 15, 2003 Posts: 753 Location: Puyallup, Wa
|
Posted: Wed Sep 21, 2011 8:12 pm Post subject: rocker replacement, what metal do I need? |
|
|
Im getting parts together to actually start working on my 64 thats been sitting in my garage since March. Ive got the majority of the sheet metal I need with the exception of the rockers for the cargo doors. Im assuming I need the inner and outer rockers, is that all or is there another piece im missing?
|
|
Back to top |
|
|
KombiMarc Samba Member
Joined: January 29, 2010 Posts: 431 Location: Phoenix, Az
|
Posted: Wed Sep 21, 2011 8:15 pm Post subject: |
|
|
The cargo rocker consist of a inner rocker, outer rocker and a stiffener that is sandwiched in the middle. There is a short rocker piece from the rear cargo door to the rear wheel well. Check my build for pics. Jump in, have fun. _________________ ________________
Thanks Marc
________________
'65 Type I
'65 Type II Kombi Rebuild Thread
http://www.thesamba.com/vw/forum/viewtopic.php?t=459009 |
|
Back to top |
|
|
dawerks Samba Member
Joined: September 15, 2010 Posts: 2349
|
Posted: Wed Sep 21, 2011 8:19 pm Post subject: |
|
|
Welcome!
I think you need the inner rocker, the cargo rocker, B pillar, C pillar, right side floor. And most likely but not 100% sure, the front/rear outriggers and possibly the tophats.
And the rear short rocker. Rust is fun! Once you start cutting it away you'll know exactly what pieces you need. _________________ "There is only one sin; disconnection from self." |
|
Back to top |
|
|
RPGreg2600 Samba Member
Joined: November 07, 2010 Posts: 1657 Location: Vallejo, CA
|
Posted: Wed Sep 21, 2011 9:56 pm Post subject: |
|
|
And post more pics of the bus. |
|
Back to top |
|
|
|