Author |
Message |
UniBug Samba Member
Joined: January 30, 2024 Posts: 31 Location: Minneapolis, North Carolina
|
Posted: Wed Jan 31, 2024 2:26 pm Post subject: Rhodes Racecar Cage |
|
|
Is the RRC 4130 Beetle cage (12 point) well thought of?
If not, who do I want to work with to get a cage bent up? I can fit and weld it to and AWS WPS once I have steel bent.
Any and all tips appriciated. Will go in my Class 11x build.
Thank you.
Charles |
|
Back to top |
|
|
Dale M. Samba Member
Joined: April 12, 2006 Posts: 20379 Location: Just a tiny bit west of Yosemite Valley
|
Posted: Thu Feb 01, 2024 8:53 am Post subject: Re: Rhodes Racecar Cage |
|
|
If you can not locate the desired "kit" any race car fabrication shop can supply and bend up the tubing if you supply the drawings or let them have the car to take measurements from....
Look around your local "industrial area" I found several builders and "racer" shops in my area when I was building my buggy that were not advertized except maybe by word of mouth... _________________ “Fear The Government That Wants To Take Your Guns" - Thomas Jefferson.
"Kellison Sand Piper Roadster" For Street & Show.
"Joe Pody Sandrover" Buggy with 2180 for Autocross (Sold)
============================================================
All suggestions and advice are purely my own opinion. You are free to ignore them if you wish ... |
|
Back to top |
|
|
VeloMikey Samba Member
Joined: March 19, 2012 Posts: 654 Location: So Cal
|
|
Back to top |
|
|
QRP Samba Member
Joined: April 27, 2008 Posts: 1712 Location: NORTH HOLLYWOOD,CA
|
Posted: Thu Feb 01, 2024 9:13 pm Post subject: Re: Rhodes Racecar Cage |
|
|
Just came across this on IG
A little pricey I would say but seems complete.
|
|
Back to top |
|
|
Mal evolent Samba Member
Joined: March 31, 2009 Posts: 2912 Location: San Antonio, Nuevo Mexico
|
Posted: Fri Feb 02, 2024 2:16 pm Post subject: Re: Rhodes Racecar Cage |
|
|
regarding that Chirco kit above: it is designed for cars with a 3" body lift if you have not lifted the body you need to lop 3" off the bottom of the upright tubes. _________________ 73 Beetle Baja, Ghia front brakes, Type 3 rear brakes, 2220 ( 94 X 80 ), Weber Progressive, Bosch SVDA, '97 Mustang seats
Baja Bugs for Volkswagen Virgins: Index |
|
Back to top |
|
|
UniBug Samba Member
Joined: January 30, 2024 Posts: 31 Location: Minneapolis, North Carolina
|
Posted: Fri Feb 02, 2024 7:05 pm Post subject: Re: Rhodes Racecar Cage |
|
|
Rhodes wants 1200 to my door for a 12 pt 4130 cage kit, and I cant find the steel any cheaper than that. I can always add to it I guess..
C. |
|
Back to top |
|
|
|