Machine shop near Michigan who can machine for cam bearings?

[anthracitedub]

I'm in the process of getting parts ready for a 40 horse rebuild. I want to put cam bearings in an early case. I'm trying to cut costs if possible, so I'm trying to find a shop close by that can take care of a few tasks, one being the cam bearings.

Does anyone know of a place close to south Michigan/ north Ohio? I had a flyer from someone I met at a show last year, but I cant find it anywhere.

[Paul Windisch]

There is this place:


Don's Sport Vehicle Sales

130 South Main Street
Perry, MI 48872
(517) 625-1884
donssport.com


Or this place:http://www.automotivemachine.net/


The latter, I'm not sure whether they do ACVW cases, but I have used them for other engine projects. Good work and reasonably priced. Give them a call and see if they do VW stuff.

The former I have not used for machine work, but they build engines and specialize in ACVW. It is a little further north than you may want to go, but reputable. They used to be located at 6mile and Telegraph, which would have been closer, but they moved semi recently.
_________________
*ASE Recertified Master Automotive Tech*

1984 Mexican Beetle
-1914cc
-L3 Heads 35x32 valves 52cc chambers
-0.040" deck for about 9.1:1 Compression
-Engle W110 cam
-CB Super Stock 1.1:1 Rockers
-Stock Heat Exchangers w/ Tri-Mil Muffler
-Dual Weber IDF 40s w/ 26mm venturis
-034 SVDA Distributor

2013 Chevrolet Volt DD
2005 Pontiac Montana SV6

MAHLE Service Solutions
Applications Engineer

[anthracitedub]

Thanks man.... I believe the place in Perry is the one I had the flyer for. I met the guy at the vintage show in Yipsi last year.

[[email protected]]

We're in Milwaukee and I can machine for for cam bearings. If you drove here, I would do it while you wait(as long as the case is clean and ready to go) Or shipping charges aren't much across the lake.

[Fordman49]

I am not sure myself as I am still a VW newb, but I betcha my buddy would know. He owns an ACVW shop in Elkhart.

[Paul Windisch]