Author |
Message |
volksaddict Samba Member
Joined: August 19, 2003 Posts: 1724
|
Posted: Wed Jan 11, 2012 7:34 am Post subject: 60 panel gets some new metal |
|
|
I had this 60 panel for sale here for as low as 2k and no one jumped. I guess I'll just have to do the dirty work myself.
It has seen a hard hit right at the B pillar and then it got the big bondo fix. I like how they filled the side panel untill they got to the pillar, then made a little correction I don't know when the bulkhead got cut out, was it with the accident damage or the cool windows - a pickup slider cut in half
Oh well, here goes... |
|
Back to top |
|
|
volksaddict Samba Member
Joined: August 19, 2003 Posts: 1724
|
Posted: Wed Jan 11, 2012 7:47 am Post subject: |
|
|
First thing to go is those stupid windows! I enlarged the holes out to the support ribs and to the joint at the roof. This way my welds have some backing. I put the reinforcing ribs back in place first, they cut out the vertical upright for the windows so I had to cut those out of the donor 59 too.
Here's the new panels. I didn't have any new metal handy so I used what I had in the junk pile. Part of a squareback roof and the long panel from a bay bus.
Looks good from the inside too!
|
|
Back to top |
|
|
volksaddict Samba Member
Joined: August 19, 2003 Posts: 1724
|
Posted: Wed Jan 11, 2012 7:52 am Post subject: |
|
|
Here's the donor metal cut out of the 59 kombi and cleaned up
And the remains of the poor kombi. Some must die so that others can live.
1 less jersey looker on the road. |
|
Back to top |
|
|
volksaddict Samba Member
Joined: August 19, 2003 Posts: 1724
|
Posted: Wed Jan 11, 2012 7:58 am Post subject: |
|
|
Windows came out nice, now the fun part!
|
|
Back to top |
|
|
ernstben Samba Member
Joined: April 30, 2005 Posts: 621 Location: Manchester, Mi
|
|
Back to top |
|
|
rockymountainaircooled Samba Member
Joined: May 18, 2011 Posts: 311 Location: Corvallis, Oregon
|
Posted: Wed Jan 11, 2012 8:35 am Post subject: |
|
|
Looking good! Can't believe no one wanted the panel that cheap... |
|
Back to top |
|
|
volksaddict Samba Member
Joined: August 19, 2003 Posts: 1724
|
Posted: Wed Jan 11, 2012 7:29 pm Post subject: |
|
|
Got all the bad metal cut out today. Man this sure beats rust repair What a nice dry bus!
|
|
Back to top |
|
|
mtnbus Samba Member
Joined: July 01, 2007 Posts: 733 Location: Colorado
|
Posted: Wed Jan 11, 2012 7:39 pm Post subject: panel fix |
|
|
how many people did it take to get that bulkhead piece out ?
I hope you hauled it with the mule.
that bus looks tough |
|
Back to top |
|
|
vw6366 Samba Member
Joined: October 24, 2003 Posts: 178 Location: Stockton "209"
|
Posted: Wed Jan 11, 2012 8:38 pm Post subject: |
|
|
Dang she going to be a keeper when your all done with her... |
|
Back to top |
|
|
tyzel Samba Member
Joined: July 04, 2010 Posts: 445
|
Posted: Wed Jan 11, 2012 10:36 pm Post subject: |
|
|
|
|
Back to top |
|
|
billybob57 Samba Member
Joined: July 16, 2007 Posts: 104 Location: Canada
|
Posted: Wed Jan 11, 2012 10:49 pm Post subject: |
|
|
Nice looking project!!! You gonna roll OG paint or repaint and is it going to be low or stock?? You must be having a blast!! _________________ "It is what it is"
55 Panel
56 Double Door |
|
Back to top |
|
|
mtnbus Samba Member
Joined: July 01, 2007 Posts: 733 Location: Colorado
|
Posted: Thu Jan 12, 2012 7:19 am Post subject: |
|
|
billybob57 wrote: |
Nice looking project!!! You gonna roll OG paint or repaint and is it going to be low or stock?? You must be having a blast!! |
Ill bet he slams that thing. Lives right off the freeway. No need for clearance |
|
Back to top |
|
|
Sancho Samba Member
Joined: March 02, 2004 Posts: 190 Location: Belgium, Mechelen
|
Posted: Thu Jan 12, 2012 7:40 am Post subject: |
|
|
you sure make it look easy |
|
Back to top |
|
|
silvertonguedevil Samba Member
Joined: September 26, 2010 Posts: 1692 Location: Vale, OR
|
Posted: Thu Jan 12, 2012 7:41 am Post subject: |
|
|
I'll give you $2k when you're done.
_________________ -Greg |
|
Back to top |
|
|
volksaddict Samba Member
Joined: August 19, 2003 Posts: 1724
|
Posted: Thu Jan 12, 2012 8:40 am Post subject: |
|
|
I'll sell it to you for 2k! Plus T&M of course I've got 30+ hrs in it right now, want me to stop and pack it up for you?
It will be fs again when the metalwork is done, it's a sweet panel but the stable is full! |
|
Back to top |
|
|
volksaddict Samba Member
Joined: August 19, 2003 Posts: 1724
|
Posted: Thu Jan 12, 2012 8:44 am Post subject: |
|
|
Quote: |
Ill bet he slams that thing. Lives right off the freeway. No need for clearance |
No doubt, make it look like Rusty's. Saw him cruisin main yesterday. Bet that truck rides like the Mule |
|
Back to top |
|
|
GLHTurbo Samba Member
Joined: March 30, 2009 Posts: 1376 Location: New Jersey
|
Posted: Thu Jan 12, 2012 9:27 am Post subject: |
|
|
wow, nice work so far...
my panel has 2 hehr windows cut in at the same spots... _________________ 1957 Beetle
1966 Bus |
|
Back to top |
|
|
volksaddict Samba Member
Joined: August 19, 2003 Posts: 1724
|
Posted: Fri Jan 13, 2012 7:47 am Post subject: |
|
|
Spent most of yesterday getting things all lined up. Wheel tub, side panel and bulkhead went in nice as 1 piece but the dogleg was tight. At this point I needed a good door to fit the opening to, the old blue one was really worked, pics don't do it justice. I dug this og paint deluxe swr one out of the junkyard. After some work with the portapower and bfh, lots of wood blocks I got everything lined up well. I sure like the ww panels these days, they fit well, pressings are nice, and the e-coating inside and out is a nice touch.
Look at that dry inner rocker No rust repair needed
At this point everything is held together with vice-grips.
Cargo door rockers, cargo floors and front floors friggin perfect. Southwest busses rule! |
|
Back to top |
|
|
silvertonguedevil Samba Member
Joined: September 26, 2010 Posts: 1692 Location: Vale, OR
|
Posted: Fri Jan 13, 2012 7:53 am Post subject: |
|
|
WOW! Nice work!! _________________ -Greg |
|
Back to top |
|
|
DanM Samba Member
Joined: June 07, 2002 Posts: 1330 Location: Falls Church, VA
|
Posted: Fri Jan 13, 2012 7:54 am Post subject: |
|
|
nice work! |
|
Back to top |
|
|
|