I know you need a new one of these?

Stuartzickefoose · Posted: Sat Mar 03, 2012 12:23 am Post subject:

maybe on the inside of the hose? haha or a sticker that can be removed?
_________________
Stuart Zickefoose

2011 Jetta Sportwagen TDi 6 speed manual

206-841-7324
[email protected]

curtis4085 · Posted: Sat Mar 03, 2012 12:35 am Post subject:

Stuartzickefoose · Posted: Sat Mar 03, 2012 12:52 am Post subject:

secretsubmariner · Posted: Sat Mar 03, 2012 6:00 am Post subject:

I think on my decel valve hose, the "C" one, the geebee IS on the bottom and you can't see it. I don't remember about the L shaped one.
_________________
-Tony
ᏣᎳᎩᎯ ᎠᏰᎵ
1978 Champagne Edition Bus FI
1970 Auto Fastback FI

Stuartzickefoose · Posted: Sat Mar 03, 2012 9:58 am Post subject:

GEEBEE · Posted: Sat Mar 03, 2012 10:03 am Post subject: ? WTF

Now your going to complain about my logo ??

I can do a custom one time charge with your name for 300.00, can make as many as you want

I was thing of making the four intake tube hoses in matte black to match, 5 ply silicone with nomex....

I can also make with no logo, remember I stuck my head to make these ( tool ) cost for the mandrell

I still have not recovered that cost yet....

So please be thankful....

GB

secretsubmariner · Posted: Sat Mar 03, 2012 10:49 am Post subject:

Geebee, I am very thankful Smile

You were excellent to work with, and they arrived so quickly!

Stuart- I paid 85 total to have the C and L at my door a couple days later. Really good stuff, and the bus thanks me too Wink

_________________
-Tony
ᏣᎳᎩᎯ ᎠᏰᎵ
1978 Champagne Edition Bus FI
1970 Auto Fastback FI

sailorkh · Posted: Sat Mar 03, 2012 10:50 am Post subject:

I think that anyone who goes out of their way to make reproduction parts for vehicles, especially good parts, that haven't been made for over 30 plus years should be considered a Saint. Just ask anyone who sells them. It is getting VERY hard to source good original parts anymore, so there are going to have to be some alternatives. The people who go that extra mile should be thanked.

Thank you, GEEBEE
_________________
Kris
1971 Deluxe
1978 Westfalia

GEEBEE · Posted: Sat Mar 03, 2012 10:55 am Post subject: !!!!! WELCOME

This all started when I put a 1.9 TDI in my 1980 caddy pickup

I also do intake ducts for aircraft and die cutting of silicone seals and gaskets....

I do the vanagon water coolant hoses and all the Ducati motorcycle models....

I still want to make the intake assys also...

GB

rustbus · Posted: Sat Mar 03, 2012 11:00 am Post subject:

Geebee, It frustrates me to read the whines about cost, lack of appreciation for your time and effort, and (and i still cant believe it) your brand name on the hose - i can't imagine how you feel as the creator. - i hope you continue to provide your products despite this

I too now have your decel valve hose, very nice product and better than a excessively long bit of hose bowed all over any day.

like a couple other previous posters, i agree you should try and make the short bit of hose between the AAR and the plenum - heres some pics of one with some rough measurements i took. i'm happy to send along this little bit of hose if it will help you reproduce it

Image may have been reduced in size. Click image to view fullscreen.

the last pic is kinda dark, the "Squashed" length is just a hair under 75mm

I'll take one if you make one!

thanks!
_________________
May of '72 Deluxe. Red Bay Bus

2.0L L-Jet CS & 091 trans conversion
my Bus thread

sailorkh · Posted: Sat Mar 03, 2012 11:09 am Post subject:

^^^^^

I'd take one too!
_________________
Kris
1971 Deluxe
1978 Westfalia

EZ Gruv · Posted: Sat Mar 03, 2012 11:55 am Post subject:

I have spares of some of these parts that I would gladly send in so you could make molds/copies/or whatever you call them. As long as I got the originals back.
I'll look and see which ones I have.
_________________
Eric
1977 Deluxe Westfalia - 2.0L FI Type IV, Completely Original
Photographer for HotVWs, VolksWorld, AirMighty, VW Camper & Commercial, Hayburner, and more.
My Photography Page.

GEEBEE · Posted: Sat Mar 03, 2012 11:56 am Post subject: ??

ITS SO SMALL I WILL JUST THROW IT IN WITH THE OTHERS WHEN PURCHASED AS A SET

I need a old to make a mandrell

Who wants to send one ( old) for a freebie

GB

Please contact me at [email protected]

secretsubmariner · Posted: Sat Mar 03, 2012 12:03 pm Post subject:

Damn! That'd be nice!! Too bad I already ordered Laughing

I never complained about the cost, for the record..
_________________
-Tony
ᏣᎳᎩᎯ ᎠᏰᎵ
1978 Champagne Edition Bus FI
1970 Auto Fastback FI

EZ Gruv · Posted: Sat Mar 03, 2012 12:06 pm Post subject:

I have parts A, C, D, E, F, S, and T.

If you want them to use as patterns, and can send back the originals, let me know.
_________________
Eric
1977 Deluxe Westfalia - 2.0L FI Type IV, Completely Original
Photographer for HotVWs, VolksWorld, AirMighty, VW Camper & Commercial, Hayburner, and more.
My Photography Page.

sailorkh · Posted: Sat Mar 03, 2012 12:38 pm Post subject: Re: ??

rustbus · Posted: Sat Mar 03, 2012 12:45 pm Post subject:

I will mail you the one I pictured, hose "G"

I will email you

Cool!
_________________
May of '72 Deluxe. Red Bay Bus

2.0L L-Jet CS & 091 trans conversion
my Bus thread

Stuartzickefoose · Posted: Sat Mar 03, 2012 10:00 pm Post subject:

I wasnt complaining, just suggesting...sorry for being disrespectful, my mistake. Embarassed

if you make B at all, PLEASE sell me one...that Tee fitting is a pain to find!
_________________
Stuart Zickefoose

2011 Jetta Sportwagen TDi 6 speed manual

206-841-7324
[email protected]


Hello! Log in or Register \| Help \| Donate \| Buy Shirts	See all banner ads \| Advertise on TheSamba.com

I know you need a new one of these?
Page: Previous 1, 2, 3, 4, 5, 6, 7, 8 Next

	Forum Index -> Bay Window Bus	All times are Mountain Standard Time/Pacific Daylight Savings Time Page: Previous 1, 2, 3, 4, 5, 6, 7, 8 Next
Page 4 of 8