Author |
Message |
curtis4085 Samba Member
Joined: July 22, 2011 Posts: 4806 Location: Colorado
|
Posted: Sun Mar 04, 2012 7:40 am Post subject: Re: ? WTF |
|
|
GEEBEE wrote: |
Now your going to complain about my logo ??
I can do a custom one time charge with your name for 300.00, can make as many as you want
I was thing of making the four intake tube hoses in matte black to match, 5 ply silicone with nomex....
I can also make with no logo, remember I stuck my head to make these ( tool ) cost for the mandrell
I still have not recovered that cost yet....
So please be thankful....
GB |
I sure in my statement I said no disrespect and I was grateful for the products. Just suggesting a change to design to offer the over all correct OG look. There were many suggestions made for the logo an it wasn't said to be disrespectful of your efforts at all. Doing a full blown classic restoration it just would be nice to have the correct look with all hose, clamps, etc that goes into the build.
Again your efforts are greatly appreciated. And I will continue to buy your products. _________________ Special Thanks to:
Headflow Masters - Vista, CA
www.headflowmasters.com |
|
Back to top |
|
|
Stuartzickefoose Samba Post Whore
Joined: February 07, 2008 Posts: 10350 Location: SoCal for now...
|
Posted: Sun Mar 04, 2012 2:00 pm Post subject: Re: ? WTF |
|
|
curtis4085 wrote: |
GEEBEE wrote: |
Now your going to complain about my logo ??
I can do a custom one time charge with your name for 300.00, can make as many as you want
I was thing of making the four intake tube hoses in matte black to match, 5 ply silicone with nomex....
I can also make with no logo, remember I stuck my head to make these ( tool ) cost for the mandrell
I still have not recovered that cost yet....
So please be thankful....
GB |
I sure in my statement I said no disrespect and I was grateful for the products. Just suggesting a change to design to offer the over all correct OG look. There were many suggestions made for the logo an it wasn't said to be disrespectful of your efforts at all. Doing a full blown classic restoration it just would be nice to have the correct look with all hose, clamps, etc that goes into the build.
Again your efforts are greatly appreciated. And I will continue to buy your products. |
as needed... _________________ Stuart Zickefoose
2011 Jetta Sportwagen TDi 6 speed manual
206-841-7324
[email protected] |
|
Back to top |
|
|
GEEBEE Samba Member
Joined: October 29, 2006 Posts: 92 Location: 92270
|
Posted: Sun Mar 04, 2012 3:50 pm Post subject: ? |
|
|
Hose assy c & d could be made as one assy
The T would be easy also
GB |
|
Back to top |
|
|
GEEBEE Samba Member
Joined: October 29, 2006 Posts: 92 Location: 92270
|
Posted: Sun Mar 04, 2012 3:52 pm Post subject: another hose |
|
|
Lets do the G pic hose to make them all match
Looks like a kit will be coming soon.....
geter done....
GB |
|
Back to top |
|
|
rustbus Samba Member
Joined: June 18, 2009 Posts: 2078 Location: alberta
|
Posted: Sun Mar 04, 2012 3:59 pm Post subject: Re: ? |
|
|
GEEBEE wrote: |
Hose assy c & d could be made as one assy
The T would be easy also
GB |
can these hoses be reinforced? A,B,C,and D are under some significant vacuum, most regular hoses collapse without some reinforcement.
_________________ May of '72 Deluxe. 2.0L L-Jet CS & 091 trans conversion
my Bus thread
Last edited by rustbus on Thu Mar 08, 2012 6:32 pm; edited 1 time in total |
|
Back to top |
|
|
GEEBEE Samba Member
Joined: October 29, 2006 Posts: 92 Location: 92270
|
Posted: Sun Mar 04, 2012 5:58 pm Post subject: hose type |
|
|
I do a five ply lay up with fiberglass
-50 to + 450
-35 inches of vac
for higher temp I do nomex reinforcement
GB
[email protected] if need be... |
|
Back to top |
|
|
GEEBEE Samba Member
Joined: October 29, 2006 Posts: 92 Location: 92270
|
Posted: Thu Mar 08, 2012 6:21 pm Post subject: HOSE G' WILL BE PART # 022-133-083 F |
|
|
We will call this part # 22-133-083F
ref ( hose G ) in the picture
I will send some to Scott at German Supply when done
GB |
|
Back to top |
|
|
webwalker Samba Member
Joined: January 26, 2006 Posts: 2803 Location: Mount Laurel, NJ
|
Posted: Thu Mar 08, 2012 7:14 pm Post subject: |
|
|
Man, having these reproduced is going to make the restart on my 1977 barn find so much easier!
Now if I can only talk GEEBEE into the S-Boot!
M _________________ "Consistent maintenance with quality products is the cheapest warranty you'll ever need."
1977 CE1 Transporter Deluxe, Subaru EJ22, Skills Cooling, Steedle HD 091 w/ GuardT .82 4th
Click to view image |
|
Back to top |
|
|
GEEBEE Samba Member
Joined: October 29, 2006 Posts: 92 Location: 92270
|
|
Back to top |
|
|
Stuartzickefoose Samba Post Whore
Joined: February 07, 2008 Posts: 10350 Location: SoCal for now...
|
Posted: Fri Mar 09, 2012 1:41 pm Post subject: |
|
|
yes that is the S boot he is talking about. _________________ Stuart Zickefoose
2011 Jetta Sportwagen TDi 6 speed manual
206-841-7324
[email protected] |
|
Back to top |
|
|
GEEBEE Samba Member
Joined: October 29, 2006 Posts: 92 Location: 92270
|
Posted: Sat Mar 10, 2012 2:18 pm Post subject: S Booty |
|
|
I bought one so I could duplicate if need be.....
I have one thousand ISF 350 intakes to do so , were a little busy for a week....
GB |
|
Back to top |
|
|
slammedresto Samba Member
Joined: October 16, 2006 Posts: 616 Location: Essex, UK
|
Posted: Sat Mar 10, 2012 3:47 pm Post subject: |
|
|
is this going to be a full kit to fit a 2.0 FI, id be interested , just to renew all the old pipework on mine, shipping to the UK ok GeeBee _________________ Campervan obsessive
www.westcoastbays.com
F1 and Motorsport memorabilia
www.finallap.net
Click to view image |
|
Back to top |
|
|
GEEBEE Samba Member
Joined: October 29, 2006 Posts: 92 Location: 92270
|
Posted: Sat Mar 10, 2012 3:50 pm Post subject: SHIPPING TO U.K. |
|
|
NO PROBLAMO
let me know as I will just have three assys so, its up to you owners to tell me what you want...
GB
Last edited by GEEBEE on Sat Mar 10, 2012 3:52 pm; edited 1 time in total |
|
Back to top |
|
|
slammedresto Samba Member
Joined: October 16, 2006 Posts: 616 Location: Essex, UK
|
Posted: Sat Mar 10, 2012 3:51 pm Post subject: Re: SHIPPING TO U.K. |
|
|
GEEBEE wrote: |
NO PROBLAMO
let me know... |
so do you have a kit all done then?? how much are they? and how much to the UK please, may be a few people this side of the water interested, so will spread the word _________________ Campervan obsessive
www.westcoastbays.com
F1 and Motorsport memorabilia
www.finallap.net
Click to view image |
|
Back to top |
|
|
GEEBEE Samba Member
Joined: October 29, 2006 Posts: 92 Location: 92270
|
Posted: Sat Mar 10, 2012 5:03 pm Post subject: KIt |
|
|
I dont have a kit, I would you advise Scott at German Supply about this,Iam sure he can put something together for you he is my stocking dealer.....
GB
Funny thing my first car in 1975 was a relaiant Robin , Lori model.... |
|
Back to top |
|
|
RatCamper Samba Member
Joined: November 13, 2008 Posts: 3305 Location: Australia
|
Posted: Sat Mar 10, 2012 5:14 pm Post subject: |
|
|
Sorry, i haven't read the intermediary pages yet. i just wanted to say that decel valve hose looks familiar. What's the diameter? It's the same construction as the hose between the mixer and the regulator on the LPG system on the Ford, so it must be a common hose type.
I need ...those bits between the bumpers. New bumpers would be nice too.
A new nosecone mount bushing would be nice. I have a section of bicycle innertube stretched over that D shaped rubber bush to compensate for shrinkage / wear. I guess it could be looked at as a replaceable wear part now, but it'd still be nice to have a homogeneous rubber bushing. _________________ Vehicle: 1975 Special order delivery walkthrough panel based pop-top camper (LCA / Sunliner). Motor: Nippon 1.8L Single port Wasserboxer, Transmission: 3 rib 002. |
|
Back to top |
|
|
GEEBEE Samba Member
Joined: October 29, 2006 Posts: 92 Location: 92270
|
Posted: Sat Mar 10, 2012 5:17 pm Post subject: ?? |
|
|
Quick somebody answer him , as I dont have a idea what he is talking about above.....
GB |
|
Back to top |
|
|
RatCamper Samba Member
Joined: November 13, 2008 Posts: 3305 Location: Australia
|
Posted: Sat Mar 10, 2012 5:27 pm Post subject: Re: ?? |
|
|
GEEBEE wrote: |
Quick somebody answer him , as I dont have a idea what he is talking about above.....
GB |
Which bit? The rubber bushing for the nosecone mount on the transmission, or the hose which seems to be common on LPG vehicles? _________________ Vehicle: 1975 Special order delivery walkthrough panel based pop-top camper (LCA / Sunliner). Motor: Nippon 1.8L Single port Wasserboxer, Transmission: 3 rib 002. |
|
Back to top |
|
|
Stuartzickefoose Samba Post Whore
Joined: February 07, 2008 Posts: 10350 Location: SoCal for now...
|
Posted: Sat Mar 10, 2012 7:28 pm Post subject: Re: ?? |
|
|
GEEBEE wrote: |
Quick somebody answer him , as I dont have a idea what he is talking about above.....
GB |
_________________ Stuart Zickefoose
2011 Jetta Sportwagen TDi 6 speed manual
206-841-7324
[email protected] |
|
Back to top |
|
|
GEEBEE Samba Member
Joined: October 29, 2006 Posts: 92 Location: 92270
|
Posted: Fri Mar 30, 2012 3:49 pm Post subject: B,C,D, ASSYS |
|
|
I want to make b,c,d as one assy ??
Who has one to borrow ?
I will send a new production one back for the use of this, no more leaks
GB |
|
Back to top |
|
|
|